CRT Screen Separated from Bezel (C_P0210).pdf

CONFIDENTIAL

Service Bulletin

Computer Monitors

CSI-111

Sony Service Company

National Technical Services

A Division of Sony Electronics Inc.

Park Ridge, New Jersey 07656

210

Model:

CPD-200ES

No.

Subject:

CRT Screen Separated from Bezel

Date:

July 27, 1998

Symptom:

(116A)

There is excessive space between the CRT face and the edge of the cabinet bezel.

This condition may occur during shipping if a jolt to the monitor carton shifts the CRT

toward the rear of the cabinet. The condition may occur if the corner mount screws

for the CRT are not sufficiently tightened.

Solution:

If the customer complains of this symptom, then please perform the following

correction procedure to reposition the CRT.

NOTE: The following item (or equivalent) is required to complete this procedu re.

REF

DESCRIPTION

PART NUMBER

TWO-SIDED ADHESIVE TAPE

7-632-453-53

Disassemble the CRT from the cabinet bezel.

Remove and discard any damaged sections of two-sided tape from the CRT and

bezel surfaces. Clean both surfaces.

Examine the CRT and the cabinet bezel to determine any physical damage.

Remove and replace any broken parts or items showing structural damage.

Carefully bend the CRT corner mount brackets toward the rear if required.

Replace the CRT if there are signs of permanent damage to the corner mount

brackets.

Reassemble the CRT and cabinet bezel assembly. Replace any missing

sections of two-sided adhesive tape between the CRT and the bezel.

Carefully tighten all (4) mount screws between the CRT and the cabinet bezel.

The correction procedure is completed.

Reference: FPR: T0465, J. Grose

PRINTED IN USA