Tuffy XJ Security Console (050).pdf

INSTALLATION INSTRUCTIONS

XJ Security Console Part # 050

Please read and fill out the enclosed warranty registration card to activate your warranty.

Tools Needed

Marking Pencil or Pen

½ ” Socket and Ratchet

½ ” Wrench

5/16” Wrench

3/8 ” Wrench

Drill and 3/8” drill bit (1/8” bit recommended for pilot hole)

For office use only

Shipping package

Warranty Card

Assembly Instructions

Drink Holder

Shelf

Keys

Rubber Seal

Checked by ______

Shipping Package

(3)5/16 x 1 ¼” Grade 8 Bolts

(2) 10-32 Unslotted Machine screws

(3) 5/16” Locknuts (2)10-32 Locknuts (6)5/16” Washers (4)#10 Washers (2) Hole Plugs

Mounting Directions

1. Pull the emergency brake all the way up and place the console between the seats in

the position desired.

2. Mark the floor directly under the (3) 3/8” mounting holes.

3. Remove the console, cut holes in the carpet where the marks are and drill a 3/8”

hole in each marked spot. Warning , failure to cut the carpet out of the way may

cause the drill bit to snag the carpet and pull a thread.

4. Fasten down the rear of the console using (3) 5/16 x 1 ¼” bolts, (3) 5/16 locknuts,

and (6) 5/16” washers.

5. Attach the drink holder to the rear of the console in either the upper or lower

mounting holes using (2) 10-32x ½” screws, (2) #10 locknuts, and (4) #10 washers.

6. Insert (2) ¼” hole plugs into the drink holder mounting holes not used.

7. Apply neoprene seal as instructed on next page.

8. Check lock operation.

THE TUFFY WARRANTY

We build Tuffy products to last a lifetime and that’s how long we’ll stand behind them. Tuffy Products are fully warranted against defects in

material and workmanship under normal use during the time that the original owner possesses the vehicle in which the part is installed and used.

Warranty does not cover expenses for installation, service, or down time. Warranty does not cover material, labor, or additional parts required for

replacement or repair of damages, malfunctions, or service failures caused by abuse (including fire or wreckage), misuse, neglect, failure to follow

the manufacturer’s operating and/or installation instructions, repairs made or attempted by unauthorized persons, and/or any claims for incidental or

consequential damages for breach of any express or implied warranties. S&K Assembling, Inc. shall only be responsible to the extent of replacing or

repairing materials supplied to customers, which are determined by S&K Assembling, Inc. to be defective and shall have no liability beyond such

repair or replacement. S&K Assembling, Inc. expressly disclaims all other warranties, express or implied, and specifically disclaims any implied or

other warranty of fitness for any particular purpose for which the product is supplied without S&K Assembling, Inc.’s knowledge or consent. Any

use or application of the material and/or products supplied to its customers for the purpose not intended for such material and/or products shall

operate to void all warranties and S&K Assembling, Inc. expressly disclaims any liability resulting from material and/or product failure in such

event. This warranty gives you specific legal rights and you may have other rights, which vary, from state to state.

Call (800)348-8339 for technical assistance

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: