3391ch1.pdf

(463 KB) Pobierz
Microelectronics, Second Edition
1
Semiconductor
Materials
1.1 Introduction
.........................................
1 - 1
1.2 Crystalline Structures
................................
1 -2
.
1 -6
•
•
•
1.4 Carrier Transport
....................................
1 - 14
...................................
1 - 18
Stuart K. Tewksbury
............................................
1 - 21
1.1 Introduction
A semiconductor material has a resistivity lying between that of a conductor and that of an insulator. In
contrast to the granular materials used for resistors, however, a semiconductor establishes its conduction
properties through a complex quantum mechanical behavior within a periodic array of semiconductor
atoms, that is, within a crystalline structure. For appropriate atomic elements, the crystalline structure
leads to a disallowed energy band between the energy level of electrons bound to the crystal’s atoms and
the energy level of electrons free to move within the crystalline structure (i.e., not bound to an atom).
This energy gap fundamentally impacts the mechanisms through which electrons associated with the
crystal’s atoms can become free and serve as conduction electrons. The resistivity of a semiconductor is
proportional to the free carrier density, and that density can be changed over a wide range by replacing a
very small portion (about 1 in 10 6 ) of the base crystal’s atoms with different atomic species ( doping atoms ).
The majority carrier density is largely pinned to the net dopant impurity density. By selectively changing
the crystalline atoms within small regions of the crystal, a vast number of small regions of the crystal
can be given different conductivities. In addition, some dopants establish the electron carrier density ( free
electron density ), whereas others establish the hole carrier density (holes are the dual of electrons within
semiconductors). In this manner, different types of semiconductor ( n type with much higher electron
carrier density than the hole density and p type with much higher hole carrier density than the electron
carrier density) can be located in small but contacting regions within the crystal.
By applying electric fields appropriately, small regions of the semiconductor can be placed in a state in
which all of the carriers (electron and hole) have been expelled by the electric field and that electric field
1 - 1
© 2006 by Taylor & Francis Group, LLC
752746283.014.png
1 -2
Microelectronics
sustained by the exposed dopant ions. This allows electric switching between a conducting state (with a
settable resistivity) and a nonconducting state (with conductance vanishing as the carriers vanish).
This combination of localized regions with precisely controlled resistivity (dominated by electron con-
duction or by hole conduction ) combined with the ability to electronically control the flow of the carriers
(electrons and holes) leads to the semiconductors being the foundation for contemporary electronics.
This foundation is particularly strong because a wide variety of atomic elements (and mixtures of atomic
elements) can be used to tailor the semiconductor material to specific needs. The dominance of silicon
semiconductor material in the electronics area (e.g., the very large-scale integrated (VLSI) digital electron-
ics area) contrasts with the rich variety of semiconductor materials widely used in optoelectronics. In the
latter case, the ability to adjust the bandgap to desired wavelengths of light has stimulated a vast number
of optoelectronic components, based on a variety of technologies. Electronic components also provide a
role for nonsilicon semiconductor technologies, particularly for very high bandwidth circuits that can take
advantage of the higher speed capabilities of semiconductors using atomic elements similar to those used
in optoelectronics. This rich interest in nonsilicon technologies will undoubtedly continue to grow, due
to the rapidly advancing applications of optoelectronics, for the simple reason that silicon is not suitable
for producing an efficient optical source.
1.2 Crystalline Structures
Basic Semiconductor Materials Groups
Most semiconductor materials are crystals created by atomic bonds through which the valence band of
the atoms are filled with eight electrons through sharing of an electron from each of four nearest neighbor
atoms. These materials include semiconductors composed of a single atomic species, with the basic atom
having four electrons in its valence band (supplemented by covalent bonds to four neighboring atoms to
complete the valence band). These elemental semiconductors, therefore, use atoms from group IV of the
atomic chart. Other semiconductor materials are composed of two atoms, one from group N ( N
<
4) and
8, filling the valence bands with eight electrons. The
major categories of semiconductor material are summarized in the following sections.
>
4) with N
+
M
=
Elemental (IV–IV) Semiconductors
Elemental semiconductors consist of crystals composed of only a single atomic element from group
IV of the periodic chart, that is, germanium (Ge), silicon (Si), carbon (C), and tin (Sn). Silicon is the
most commonly used electronic semiconductor material and is also the most common element on Earth.
Table 1.1 summarizes the naturally occurring abundance of some elements used for semiconductors,
including nonelemental (compound) semiconductors.
Figure 1.1(a) illustrates the covalent bonding (sharing of outer shell, valence band electrons by two
atoms) through which each group IV atom of the crystal is bonded to four neighboring group IV atoms,
creating filled outer electron bands of eight electrons.
TABLE 1.1 Abundance (Fraction of
Elements Occurring on Earth) of Common
Elements Used for Semiconductors
Element
Abundance
Si
0
28
Ga
1
5
×
10 − 5
As
1
8
×
10 − 6
Ge
5
×
10 − 6
Cd
2
×
10 − 7
In
1
×
10 − 7
© 2006 by Taylor & Francis Group, LLC
the other from group M ( M
.
.
.
752746283.015.png
Semiconductor Materials
1 -3
GROUP IV
GROUP III
GROUP V
GROUP II
GROUP VI
Si
Ga
As
Cd
Se
IV
IV
IV
IV
III
IV
III
V
II
VI
II
VI
IV
IV
IV
IV
V
III
V
III
VI
II
VI
II
IV
IV
IV
IV
III
V
III
V
II
VI
II
VI
IV
IV
IV
IV
V
III
V
III
VI
II
VI
II
(a)
(b)
(c)
FIGURE 1.1 Bonding arrangements of atoms in semiconductor crystals: (a) elemental semiconductor such as silicon,
(b) compound III–V semiconductor such as GaAs, (c) compound II–VI semiconductor such as CdS.
In addition to crystals composed of only a single group IV atomic species, one can also create semicon-
ductor crystals consisting of two or more atoms, all from group IV. For example, silicon carbide (SiC) has
been investigated for high-temperature applications. Si x Ge 1 − x semiconductors are presently under study
to achieve bandgap engineering within the silicon system. In this case, a fraction x (0
<
x
<
1) of the
x has been replaced by germanium.
This ability to replace a single atomic element with a combination of two atomic elements from the same
column of the periodic chart appears in the other categories of semiconductor described subsequently
(and is particularly important for optoelectronic devices).
−
Compound III–V Semiconductors
The III–V semiconductors are prominent (and will gain in importance) for applications of optoelectronics.
In addition, III–V semiconductors have a potential for higher speed operation than silicon semiconductors
in electronics applications, with particular importance for areas such as wireless communications. The
compound semiconductors have a crystal lattice constructed from atomic elements in different groups
of the periodic chart. The III–V semiconductors are based on an atomic element A from group III and an
atomic element B from group V. Each group III atom is bound to four group V atoms, and each group V
atom is bound to four group III atoms, giving the general arrangement shown in Fig. 1.1(b). The bonds
are produced by sharing of electrons such that each atom has a filled (eight electron) valence band. The
bonding is largely covalent, though the shift of valence charge from the group V atoms to the group III
atoms induces a component of ionic bonding to the crystal (in contrast to the elemental semiconductors
that have purely covalent bonds). Representative III–V compound semiconductors are GaP, GaAs, GaSb,
InP, InAs, and InSb.
GaAs is probably the most familiar example of III–V compound semiconductors, used for both high-
speed electronics and for optoelectronic devices. Optoelectronics has taken advantage of ternary and
quaternary III–V semiconductors to establish optical wavelengths and to achieve a variety of novel de-
vice structures. The ternary semiconductors have the general form ( A x , A 1 − x ) B (with two group III
atoms used to fill the group III atom positions in the lattice) or A ( B x , B 1 − x ) (using two group V atoms
in the group V atomic positions in the lattice). The quaternary semiconductors use two group III
atomic elements and two group V atomic elements, yielding the general form ( A x , A 1 − x )( B y , B 1 − y ).
In such constructions, 0
≤
x
≤
© 2006 by Taylor & Francis Group, LLC
atoms in an otherwise silicon crystal is silicon whereas a fraction 1
1. Such ternary and quaternary versions are important since the mixing
factors ( x and y ) allow the bandgap to be adjusted to lie between the bandgaps of the simple com-
pound crystals with only one type of group III and one type of group V atomic element. The ad-
justment of wavelength allows the material to be tailored for particular optical wavelengths, since the
752746283.016.png 752746283.017.png 752746283.001.png 752746283.002.png 752746283.003.png 752746283.004.png 752746283.005.png 752746283.006.png
1 -4
Microelectronics
TABLE 1.2 Semiconductor Optical Sources
and Representative Wavelengths
Material Layers Used
Wavelength, nm
ZnS
454
AlGaInP/GaAs
580
AlGaAs/GaAs
680
GaInAsP/InP
1580
InGaAsSb/GaSb
2200
AlGaSb/InAsSb/GaSb
3900
PbSnTe/PbTe
6000
E g ,where h
is Planck’s constant and c is the speed of light. Table 1.2 provides examples of semiconductor laser
materials and a representative optical wavelength for each, providing a hint of the vast range of com-
binations that are available for optoelectronic applications. Table 1.3, on the other hand, illustrates the
change in wavelength (here corresponding to color in the visible spectrum) by adjusting the mixture of a
ternary semiconductor.
In contrast to single element elemental semiconductors (for which the positioning of each atom on a
lattice site is not relevant), III–V semiconductors require very good control of stoichiometry (i.e., the ratio
of the two atomic species) during crystal growth. For example, each Ga atom must reside on a Ga (and
not an As) site and vice versa. For these and other reasons, large III–V crystals of high quality are generally
more difficult to grow than a large crystal of an elemental semiconductor such as Si.
λ
of light is related to energy (in this case the gap energy E g )by
λ =
hc
/
Compound II–VI Semiconductors
These semiconductors are based on one atomic element from group II and one atomic element from
group VI, each type being bonded to four nearest neighbors of the other type, as shown i n Fig. 1.1(c) . The
increased amount of charge from group VI to group II atoms tends to cause the bonding to be more ionic
than in the case of III–V semiconductors. II–VI semiconductors can be created in ternary and quaternary
forms, much like the III–V semiconductors. Although less common than the III–V semiconductors,
the II–VI semiconductors have served the needs of several important applications. Representative II–VI
semiconductors are ZnS, ZnSe, and ZnTe (which form in the zinc blende lattice structure discussed
subsequently); CdS and CdSe (which can form in either the zinc blende or the wurtzite lattice structure);
and CdTe (which forms in the wurtzite lattice structure).
Three-Dimensional Crystal Lattice
The two-dimensional views illustrated in the preceding section provide a simple view of the sharing
of valence band electrons and the bonds between atoms. The full three-dimensional lattice structure,
however, is considerably more complex than this simple two-dimensional illustration. Fortunately, most
semiconductor crystals share a common basic structure, developed as follows.
TABLE 1.3 Variation of x to Adjust
Wavelength in GaAs x P 1 − x Semiconductors
Ternary Compound
Color
GaAs 0 . 14 P 0 . 86
Ye l l o w
GaAs 0 . 35 P 0 . 65
Orange
GaAs 0 . 6 P 0 . 4
Red
© 2006 by Taylor & Francis Group, LLC
wavelength
752746283.007.png
Semiconductor Materials
1 -5
FCC LATTICE
A
(a)
(b)
(c)
FCC LATTICE
B
FIGURE 1.2 Three-dimensional crystal lattice structure: (a) basic cubic lattice, (b) face-centered cubic (fcc) lattice,
(c) two interpenetrating fcc lattices. In this figure, the dashed lines between atoms are not atomic bonds but, instead,
are used merely to show the basic outline of the cube.
The crystal structure begins with a cubic arrangement of eight atoms as shown in Fig. 1.2(a). This cubic
lattice is extended to a face-centered cubic (fcc) lattice, shown in Fig. 1.2(b), by adding an atom to the center
of each face of the cube (leading to a lattice with 14 atoms). The lattice constant is the side dimension of
this cube.
The full lattice structure combines two of these fcc lattices, one lattice interpenetrating the other (i.e., the
corner of one cube is positioned within the interior of the other cube, with the faces remaining parallel),
as illustrated in Fig. 1.2(c). For the III–V and II–VI semiconductors with this fcc lattice foundation, one
fcc lattice is constructed from one type of element (e.g., type III) and the second fcc lattice is constructed
from the other type of element (e.g., group V). In the case of ternary and quaternary semiconductors,
elements from the same atomic group are placed on the same fcc lattice. All bonds between atoms occur
between atoms in different fcc lattices. For example, all Ga atoms in the GaAs crystal are located on
one of the fcc lattices and are bonded to As atoms, all of which appear on the second fcc lattice. The
interatomic distances between neighboring atoms is, therefore, less than the lattice constant. For example,
the interatomic spacing of Si atoms is 2.35 A but the lattice constant of Si is 5.43 A.
If the two fcc lattices contain elements from different groups of the periodic chart, the overall crystal
structure is called the zinc blende lattice. In the case of an elemental semiconductor such as silicon, silicon
atoms appear in both fcc lattices, and the overall crystal structure is called the diamond lattice (carbon
crystallizes into a diamond lattice creating true diamonds, and carbon is a group IV element). As in the
discussion regarding III–V semiconductors, the bonds between silicon atoms in the silicon crystal extend
between fcc sublattices.
Although the common semiconductor materials share this basic diamond/zinc blende lattice structure,
some semiconductor crystals are based on a hexagonal close-packed (hcp) lattice. Examples are CdS and
CdSe. In this example, all of the Cd atoms are located on one hcp lattice whereas the other atom (S or
Se) is located on a second hcp lattice. In the spirit of the diamond and zinc blende lattices, the complete
lattice is constructed by interpenetrating these two hcp lattices. The overall crystal structure is called a
wurtzite lattice. Type IV–VI semiconductors (PbS, PbSe, PbTe, and SnTe) exhibit a narrow bandgap and
have been used for infrared detectors. The lattice structure of these example IV–VI semiconductors is the
simple cubic lattice (also called an NaCl lattice).
Crystal Directions and Planes
Crystallographic directions and planes are important in both the characteristics and the applications of
semiconductor materials since different crystallographic planes can exhibit significantly different physical
properties. For example, the surface density of atoms (atoms per square centimeter) can differ substantially
on different crystal planes. A standardized notation (the so-called Miller indices ) is used to define the
crystallographic planes and directions normal to those planes.
The general crystal lattice defines a set of unit vectors ( a , b , and c ) such that an entire crystal can be
developed by copying the unit cell of the crystal and duplicating it at integer offsets along the unit vectors,
© 2006 by Taylor & Francis Group, LLC
752746283.008.png 752746283.009.png 752746283.010.png 752746283.011.png 752746283.012.png 752746283.013.png
Zgłoś jeśli naruszono regulamin