530 2004 petrol YES.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

BMW

530*

YEAR 04 ﬁ

PETROL

DIESEL

MAKE

MOD.

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the shock absorber, driver’s side.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+30: connect to the 10 mm 2 RED wire located in the rear part of the passenger’s side glove compartment.

-31: connect to an original ground terminal located behind the passenger’s side bulkhead.

IGNITION WIRE

+15/54: connect to the VIOLET/WHITE wire, in the white central on the left of the steering column. As

alternative: connect to the GREEN/WHITE wire behind the passenger’s side sill cover, in the wiring

harness that supplies the rear equipments.

DIRECTION INDICATORS

Ant. and post. direction indicators connection

Connect to the wires: BLUE/BROWN at the pos. nr.1, BLUE/GREEN at the pos. nr.4, BLUE/BROWN at

the pos. nr.68 and BLUE/BROWN at the pos. nr.24 in the 76 way white connector, on the black central on

the left of the steering column.

Note: Separate the lines with 1N5406 diodes.

ELECTRIC WINDOWS

Control signal with comfort system

The locking of the windows is obtained by original radio control.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Art.3800 Vehicle Position

YELLOW/BLACK BLACK/BLUE position nr. 4 in the 13 way black connector

GREY/BLACK BLUE/BROWN position nr. 7 in the 13 way black connector

VIOLET ground car body

ORANGE ground car body

VIOLET/WHITE ground car body

ORANGE/WHITE ground car body

The wires: BLACK/BLUE and BLUE/BROWN are the controls of the motor of the fuel cup. The black

connector is located in the central locking unit placed behind the passenger’s side glove compartment.

Note: When finishing the installation, cut the BLUE/RED wire at the position nr. 4, in the 8 way black

connector, inside the driver’s side door, near the mechanic locking.

IMMOBILISATION POINT

Fuel pump

Cut the VIOLET/BLACK wire located in the wiring harness coming out of the connector of the fuel pump

relay located behind the passenger’s side glove compartment.

STARTER

+50: Cut the 2mm 2 BLACK wire located in the white central on the left of the steering column.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Positive control

Connect to the BLUE/GREEN wire at the position nr. 35, in the 54 way black connector coming out of the

central locking unit behaind the glove compartment, passenger’s side.

BOOT SWITCH

Connect to the BROWN/WHITE wire directly on the coming out of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

bm53004gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: