MCSMA03GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MCC

MOD. SMART*

YEAR 03 ﬁ

PETROL

DIESEL

MAKE

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens behind the front wheelhouse, on the rod on the

side of the windshield wiper cup. Pass the cables using the original rubber located behind the

driver’s side light.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the driver’s side dashboard.

POWER SUPPLY

+30: connect to the 4mm 2 RED wire, in the 3 way black connector, in the fuse box.

-31: connect to one of the ground terminals located behind the driver’s side bulkhead.

IGNITION WIRE

+15/54: connect to the GREY/GREEN wire at the position nr.3, in the 12 way brown

connector, in the fuse box.

DIRECTION INDICATORS

Connect to the 1mm 2 wires: GREEN/BLACK at the position nr. 11 and to the WHITE/BLACK

at the position nr. 1, located in the 40 way white connector, in the fuse box.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the 2mm 2 GREEN wire coming out of the motor, driver’s side.

Front window, passenger’s side:

cut the 2 mm 2 GREEN wire coming out of the motor, passenger’s side.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle

CONTROLS

Position

Wiring harness coming out driver’s side door

car body

40 way white connector, in the fuse box.

car body

Refer to the “A” diagram of the dedicated installations manual, inside the kit of the antitheft.

Vehicle

WHITE/BLUE

GREY/BLUE

Ground

WHITE/BLACK

Ground

IMMOBILISATION POINT

Fuel pump

Cut the RED/BLACK wire, at the position nr.9, in the 12 way brown connector, in the fuse

box.

STARTER

+50: Cut the 2,5 mm 2 BLUE wire, in the 2 way white connector, in the fuse box.

BONNET SWITCH

Install an additional switch on the headlamp support plate, near the left lateral light.

DOORS SWITCH

Connect to the YELLOW/WHITE wire at the position nr.4 (ant. lef), and to the

YELLOW/RED wire at the position nr.19 (ant. right) in the 40 way white connector, in the

fuse box.

BOOT SWITCH

Connect to the BROWN/YELLOW wire, in the 4 way black connector of the lamp

placed in the central consolle.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mcsma03gbbt.doc

Art. 3800

GREY/BLACK

YELLOW/BLACK

VIOLET/WHITE

ORANGE/WHITE

VIOLET

ORANGE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: