MCSMA99GBD.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

MCC

MOD. SMART

YEAR 99 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the

support of the shock absorber.

POWER SUPPLY

+ 30: connect to the 2 mm 2 RED wire in a multiway connector located at the

entrance of the fuse box.

- 31: connect with a cable terminal to one of the ground terminals located behind

the left lateral panel, driver’s side.

IGNITION WIRE

+ 15/54: connect to the RED wire located at the position marked “E” on the rear of

the fuse box.

DIRECTION INDICATORS

Connect to the 1 mm 2 GREEN and PINK wires located in the multiway connector,

on the rear of the fuse box.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the 2 mm 2 GREEN wire directly on the coming out of the engine, driver’s side.

Front window, passenger’s side:

cut the 2 mm 2 GREEN wire directly on the coming out of the engine, passenger’s

side.

CENTRAL DOORS LOCKING Original door motor direct control

Cut the 1,5 mm 2 WHITE/BLUE wire (unlock) and GREY/LIGHT BLUE wire (lock)

located on the rear of the fuse box. Refer to the diagram nr.127 for Bridge serie

antithefts or to the diagram nr.127A for 3100 serie antithefts.

IMMOBILISATION POINT 1

Gasoil pump

Cut the GREY/GREEN wire located in a black connector on the front part of the

fuse box, under the dashboard, driver’s side.

IMMOBILISATION POINT 2

Inertial switch

Cut the 1 mm 2 BLUE wire of the inertial switch located on the left of the engine

compartment, above the brakes pump.

STARTER

+ 50: Cut the 1,5 mm 2 BLUE wire in the wiring harness located along the steering

column under the dashboard, driver’s side.

BONNET SWITCH

Install an additional switch on the headlamp support plate, near the left lateral

lamp.

DOORS AND BOOT SWITCH Connect to the BROWN/BLUE wire located in a black connector in the front part of

the fuse box, under the dashboard, driver’s side.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mcsma99gbd.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°127

Diagram to make the central locking on

MCC SMART

(for serie Bridge antithefts)

WHITE/BLUE GREY/LIGHT BLUE

ORANGE

GREY/BLACK

VIOLET

YELLOW/BLACK

VIOLET/ORANGE

+ 30

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mcsma99gbd.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°127A

Diagram to make the central locking on

MCC SMART

(for serie 3100 antithefts)

WHITE/BLUE GREY/LIGHT BLUE

ORANGE

GREY/BLACK

VIOLET

YELLOW/BLACK

VIOLET/WHITE

ORANGE/WHITE

+ 30

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mcsma99gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: