RETRA03GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE RENAULT

MOD. TRAFIC*

YEAR 03 ﬁ

PETROL

DIESEL

* Vers. with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens behind the passenger’s side headlamp.

CENTRAL UNIT POSITION

The modular systems and the modules should be positioned under the dashboard, driver’s

side.

POWER SUPPLY

+30: connect to the position B1 in the connector marked P202 in the locking central unit

located behind the steering column.

-31: connect to the position B9 in the connector marked P202 in the locking central unit

located behind the steering column.

IGNITION WIRE

+15/54: connect to the position B3 in the connector marked P202 in the locking central unit

located behind the steering column.

DIRECTION INDICATORS

Connect to the PINK wire at the position A3, and to the VIOLET wire at the position A4, in

the connector marked P202, in the central locking unit placed behind the steering column.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

Cut the WHITE wire at the position B5, in the 9 way black connector, in the windows

operating central inside the driver’s side door.

Front window, passenger’s side:

Cut the WHITE wire at the position A1, in the 12 way black connector, in the serial push-

button panel in the driver’s side door.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle

CONTROLS

Position

Pos. A6 in the connector marked P202

Pos. A9 in the connector marked P202

Pos. 13 in the connector marked P201

Pos. 14 in the connector marked P201

car body

power supply in the fuse box

The connectors markedP201 and P202 are located in the central behind the steering

column. Refer to the “C” diagram in the dedicated installations manual in the kit of the

antitheft.

Vehicle

GREY

WHITE

GREEN

PINK

ground

positive

IMMOBILISATION POINT

Fuel pump

Cut the YELLOW wire at the position nr.29 located in the white connector of the central

located on the right of the steering column, above the passenger’s side glove

compartment.

STARTER

+50: Cut the WHITE wire, in the wiring harness coming out of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp plate, driver’s side.

FRONT DOORS SWITCH

Connect to the GREEN wire, at the position nr. 27, in the connector marked P 201, in the

central locking unit placed behind the steering column.

BOOT AND LATERAL DOOR

SWITCH

Connect to the VIOLET wire, at the position nr. 23, in the connector marked P201, in the

central locking unit placed behind the steering column.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

retra03gbbt.doc

Art.3800

YELLOW/BLACK

GREY/BLACK

VIOLET

ORANGE

VIOLET/WHITE

ORANGEWHITE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: