802Dsl_BPMMP(2).pdf

(3989 KB) Pobierz
SINUMERIK SINUMERIK 802D sl Manual Machine Plus Turning
1
Description
2
Software interface
SINUMERIK
Turning On, Reference Point
Approach
3
SINUMERIK 802D sl
Manual Machine Plus Turning
4
Setting-up
5
Manual machining
Programming and Operating Manual
Machining the machining
step program manually
6
7
Messages
A
Appendix
Valid for
Controller Software version
SINUMERIK 802D sl T/M 1.4 SP5
06/2009
6FC5398-6CP10-1BA0
921222888.050.png 921222888.058.png 921222888.059.png
 
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
Legal information
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes
in this documentation qualified persons are defined as persons who are authorized to commission, ground and
label devices, systems and circuits in accordance with established safety practices and standards.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be adhered to. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
Ordernumber: 6FC5398-6CP10-1BA0
Ⓟ 0/2009
Copyright © Siemens AG 2009.
Technical data subject to change
921222888.001.png 921222888.002.png 921222888.003.png 921222888.004.png 921222888.005.png 921222888.006.png 921222888.007.png 921222888.008.png 921222888.009.png 921222888.010.png 921222888.011.png 921222888.012.png 921222888.013.png 921222888.014.png 921222888.015.png 921222888.016.png 921222888.017.png 921222888.018.png 921222888.019.png 921222888.020.png 921222888.021.png 921222888.022.png 921222888.023.png
 
Foreword
SINUMERIK documentation
The SINUMERIK documentation is organized in 3 parts:
● General documentation
● User documentation
● Manufacturer/Service documentation
An overview of publications, which is updated monthly and also provides information about
the language versions available, can be found on the Internet at:
Follow menu items "Support" → "Technical Documentation" → "Ordering Documentation" →
"Printed Documentation".
The Internet version of DOConCD (DOConWEB) is available at:
Information about training courses and FAQs (Frequently Asked Questions) can be found at
the following website:
Target group
This publication is intended for programmers, planning engineers, machine operators and
system operators.
Benefits
With the Programming and Operating Manual, the target group can develop, write, test and
debug programs and software user interfaces.
It also contains the information required for the target group to operate the hardware and
software of a product/system (generally a machine).
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control.
However, no claim can be made regarding the availability of these functions when the
equipment is first supplied or in the event of servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case of
installation, operation or maintenance.
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
3
921222888.024.png
Foreword
Technical support
If you have any technical questions, please contact our hotline:
Europe / Africa
Phone
+49 180 5050 222
Fax
+49 180 5050 223
Internet
America
Phone
+1 423 262 2522
Fax
+1 423 262 2200
E-Mail
Asia/Pacific
Phone
+86 1064 719 990
Fax
+86 1064 747 474
E-Mail
Note
Country-specific telephone numbers for technical support are provided under the following
Internet address:
Calls are subject to charge, e.g. €0.14/min from a German landline. Tariffs of other phone
providers may differ.
Questions about this documentation
If you have any queries (suggestions, corrections) regarding this documentation, please
send a fax or email to the following address:
Fax
+49 9131- 98 2176
E-Mail
A fax form is available in the appendix of this document.
SINUMERIK Internet address
Manual Machine Plus Turning
4
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
921222888.025.png 921222888.026.png 921222888.027.png 921222888.028.png 921222888.029.png 921222888.030.png 921222888.031.png 921222888.032.png 921222888.033.png 921222888.034.png 921222888.035.png 921222888.036.png 921222888.037.png 921222888.038.png 921222888.039.png 921222888.040.png 921222888.041.png 921222888.042.png 921222888.043.png 921222888.044.png 921222888.045.png 921222888.046.png 921222888.047.png 921222888.048.png 921222888.049.png 921222888.051.png 921222888.052.png 921222888.053.png 921222888.054.png 921222888.055.png 921222888.056.png 921222888.057.png
 
Foreword
EC Declaration of Conformity (only for hardware descriptions)
The EC Declaration of Conformity for the EMC Directive can be found/obtained:
● on the internet:
under the product/order No. 15263595
● at the relevant regional office of the I DT MC Business Unit of Siemens AG.
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
5
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin