BAD.pdf

(14749 KB) Pobierz
Introduction
1
Operator Components/
2
Operating Sequences
SINUMERIK 840Di sl/840D sl/840D
Example of Operation
3
4
Machine
HMI-Advanced
Parameters
5
Operating Manual
Program
6
Services
7
Diagnostics
8
operating area
Valid for
Commissioning
9
operating area
Control
SINUMERIK 840D sl / 840 DE sl
SINUMERIK 840Di sl / 840 DiE sl
SINUMERIK 840D powerline / 840DE powerline
Maintenance
10
Appendix
A
Software
Software version
HMI-Advanced
7.5
01/2008 Edition
921772456.026.png 921772456.027.png 921772456.028.png 921772456.029.png
 
SINUMERIK ® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each version is indicated by the code in the "Remarks" columns.
Status code in the "Remarks" column:
A ....
New documentation.
B ....
Unrevised reprint with new order number.
C ....
Revised edition with new status.
SW assignment
Edition
Order No.
Remarks
02.01
6FC5298-6AF00-0BP0
C
11.02
6FC5298-6AF00-0BP2
C
03.04
6FC5298-6AF00-0BP2
C
NCU system software 7
08/2005
6FC5398-2AP10-0BA0
C
HMI-Advanced V 7.1
01/2006
6FC5398-2AP10-1BA0
C
HMI-Advanced V 7.2 SP1
11/2006
6FC5398-2AP10-2AA0
C
6FC5398-2AP10 - 3BA0 C
01/2008
Registered trademarks
All names with the protective right label ® are registered trademarks of the Siemens AG. The
other product and system names in this document may be registered trademarks of their
respective companies and must be treated accordingly. .
Disclaimer of liability
We have checked that the contents of this document correspond to the hardware and
software described. Since deviations cannot be precluded entirely, we cannot guarantee full
agreement. The information contained in this document is, however, reviewed regularly and
any necessary changes will be included in the next edition.
Siemens AG
Automation and Drives
Postfach 48 48
90437 N UREM BERG
GERMANY
Order No. 6FC5398-2AP10 - 3BA0
Copyright © Siemens AG 1995 - 2008
Subject to change without prior notice
921772456.001.png 921772456.002.png 921772456.003.png
0 01/2008
0
Preface
Layout of manual
Preface
SINUMERIK
Documentation
The SINUMERIK documentation is organized in 3 parts:
•
General documentation
•
User documentation
•
Manufacturer/Service Documentation
An overview of publications, which is updated on a monthly basis and
provides information about the language versions available, can be
found on the Internet at:
Follow the menu items "Support" "Technical Documentation"
"Overview of Publications".
The Internet version of DOConCD (DOConWEB) is available at:
Information about training courses and FAQs (Frequently Asked
Questions) can be found in internet under:
http://www.siemens.com/motioncontrol u nder menu item "Support"
Target readership of this
documentation
This manual is intended for machine-tool users. The document
describes in detail all the technical information an operator needs to
operate the SINUMERIK 840Di sl/840D sl/840D controls.
This Operator’s Guide describes only the functionality of the standard
version. Extensions or changes made by the machine manufacturer
are documented by the machine manufacturer.
Standard scope
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
Questions on the manual
If you have any questions about the documentation (suggestions,
corrections) please send
a fax or e-mail to the following address:
Fax: +49 (0) 9131 / 98 - 63315
EC Declaration of
Conformity
The EC Declaration of Conformity for the EMC Directive can be
viewed/downloaded from the Internet at:
under the Product Order No. 15257461 or at the relevant branch
office of the A&D MC Division of Siemens AG.
©
Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
iii
921772456.004.png
 
921772456.005.png 921772456.006.png 921772456.007.png 921772456.008.png 921772456.009.png 921772456.010.png 921772456.011.png
0 Preface
0
01/2008
Layout of manual
Hotline
If you have any questions, please contact the following hotline:
Europe and Africa time zone:
A&D Technical Support
Tel.: +49 (0) 180 / 5050 - 222
Fax: +49 (0) 180 / 5050 - 223
Asia and Australia time zone
A&D Technical Support
Tel.: +86 1064 719 990
America time zone
A&D Technical Support
Tel.: +1 423 262 2522
Internet address
Safety information
This Manual contains information which you should carefully observe
to ensure your own personal safety and the prevention of material
damage. The notices referring to your personal safety are highlighted
in the manual by a safety alert symbol, notices referring to property
damage only, have no safety alert symbol. Depending on the hazard
level, warnings are indicated in a descending order as follows:
Danger
Indicates that death or severe personal injury will result if proper
precautions are not taken.
Warning
This warning notice indicates that death or severe personal injury can
result if proper precautions are not taken.
©
Siemens AG 2008 All rights reserved.
iv
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
921772456.012.png
 
921772456.013.png 921772456.014.png 921772456.015.png 921772456.016.png 921772456.017.png 921772456.018.png
0 01/2008
0
Preface
Layout of manual
Caution
means that there can be slight physical injury if the corresponding
safety measures are not followed.
Caution
without a safety alert symbol, indicates that property damage may
result if proper precautions are not taken.
Notice
This means that an undesirable result or an undesirable state can
occur if the information is ignored.
If multiple levels of hazards can occur, the warning is always
displayed with the highest possible level. If a warning with a warning
triangle is to indicate physical injury, the same warning may also
contain information about damage to property.
The associated device/system may only be set-up and operated in
conjunction with this documentation. The device/system must be
commissioned and operated by qualified personnel only. Qualified
personnel as referred to in the safety guidelines in this documentation
are those who are authorized to start up, earth and label units,
systems and circuits in accordance with the relevant safety standards.
Qualified persons
Please observe the following:
Correct use
Warning
The device must only be used for the applications specified in the
catalog and in the technical description. The device must only be used
in conjunction with external devices and components recommended
or approved by Siemens. Correct, reliable operation of the product
required proper transport, storage, positioning and assembly, as well
as careful operation and maintenance.
©
Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
v
921772456.019.png
 
921772456.020.png 921772456.021.png 921772456.022.png 921772456.023.png 921772456.024.png 921772456.025.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin