field_e.pdf

27.01.00

16.11.99

Contents

Field device blocks

Appendix

Index

SIMATIC

PCS 7

Field Device Blocks

Manual

11/99

C79000-G7076-C716

Edition 03

27.01.00

16.11.99

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper

precautions are not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper

precautions are not taken.

Caution

indicates that minor personal injury or property damage can result if proper precautions are not taken.

Note

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are

defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and

systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the

technical descriptions, and only in connection with devices or components from other manufacturers

which have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly, and operated and maintained as recommended.

Trademarks

SIMATIC®, SIMATIC HMI® and SIMATIC NET® are registered trademarks of SIEMENS AG.

Some of other designations used in these documents are also registered trademarks; the owner's rights may

be violated if they are used by third parties for their own purposes.

The reproduction, transmission or use of this document or its contents

is not permitted without express written authority. Offenders will be

liable for damages. All rights, including rights created by patent grant

or registration of a utility model or design, are reserved.

Disclaimer of Liability

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be

precluded entirely, we cannot guarantee full agreement. However, the

data in this manual are reviewed regularly and any necessary

corrections included in subsequent editions. Suggestions for

improvement are welcomed.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie-Automatisierungssysteme

Postfach 4848, D- 90327 Nuernberg

©Siemens AG 1999

Technical data subject to change.

Siemens Aktiengesellschaft

C79000-G7076-C716

27.01.00

16.11.99

Contents

Field device blocks

1-1

1.1

SIMOCODE ............................................................................................... 1-1

1.1.1

I/O bar of SIMOCODE ............................................................................... .1-6

1.1.2

Operator control and monitoring of SIMOCOD ........................................ . 1-11

1.2

SIMOVERT.............................................................................................. 1-12

1.2.1

I/O bar of SIMOVERT .............................................................................. .1-19

1.2.2

Operator control and monitoring via SIMOVER ....................................... . 1-29

1.3

SIPART19 ............................................................................................... 1-31

1.3.1

I/O bar of SIPART19................................................................................ .1-39

1.3.2

Operator control and monitoring via SIPART 1........................................ . 1-46

1.4

SIPART21 ............................................................................................... 1-50

1.4.1

I/O bar of SIPART21................................................................................ .1-58

1.4.2

Operator control and monitoring via SIPART 2........................................ . 1-67

1.5

SIPOS3MC .............................................................................................. 1-70

1.5.1

I/O bar of SIPOS3MC .............................................................................. .1-75

1.5.2

Operator control and monitoring via SIPOS3MC....................................... . 1-82

Appendix

A-1

A.1

Technical data........................................................................................... .A-1

Index

Index - 1

PCS 7 Field Device Blocks

C79000-G7076-C716-03

iii

27.01.00

16.11.99

Contents

PCS 7 Field Device Blocks

C79000-G7076-C716-03

27.01.00

16.11.99

Field device blocks

1.1

SIMOCODE

Type/Number

FB 196

Area of application

The block serves the purpose of connecting the motor protection and control

system SIMOCODE-DP 3UF5 (basic type 1, 2, 3) with communication facilities.

The block can only be used with SIMOCODE DP- 3UF5001-3AN00-1, Version

E003.

The block is designed for the default assignments of the type files of

SIMOCODE-DP 3UF5 with control function WEND (reversible starter). Parameter

assignment takes place via HWConfig (hardware configuration with SIMATIC

Manager). The control functions UELA (overload), DIRE (direct start) and STER

(star-delta startup) and other assignments are not checked by the block and may

lead to incorrect reactions.

Calling OBs

The block can be installed alternatively in the following OBs:

•

Cyclic task: OB1

•

Watchdog interrupt OB: for example OB32

The block must be installed with the same instance in following OBs:

•

OB82 for diagnostic interrupt recognition

•

OB86 for rack or line failure recognition (event comes when SIMOCODE-DP

3UF5 does not respond via PROFIBUS-DP)

•

OB100 for startup recognition

•

OB122 for I/O access error recognition

PCS 7 Field Device Blocks

C79000-G7076-C716-03

1-1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: