GSFieldPG_e.pdf

SIMATIC

Field PG

Getting Started

Edition 01/2002

First Steps in Commissioning

Safety guidelines

This Getting Started contains notices intended to ensure personal safety, as well as to protect the products and con-

nected equipment against damage. These notices are highlighted by the symbols shown below and graded according

to severity by the following texts:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions are not

taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precautions are not

taken.

Caution

indicates that minor personal injury can result if proper precautions are not taken.

Caution

indicates that property damage can result if proper precautions are not taken.

Notice

draws your attention to particularly important information on the product, handling the product, or to a particular part of

the documentation.

Qualified Personnel

Repair, maintenance and servicing of device only to be carried out by qualified personnel. Qualified persons are defined

as persons who are authorized to commission, to ground, and to tag circuits, equipment, and systems in accordance

with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the technical descrip-

tion, and only in connection with devices or components from other manufacturers which have been approved or rec-

ommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and oper-

ated and maintained as recommended.

Trademarks

SIMATIC, SIMATIC HMI and SIMATIC NET are registered trademarks of Siemens AG.

Third parties using for their own purposes any other names in this document which refer to trademarks might infringe

upon the rights of the trademark owners.

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design, are

reserved.

Siemens AG

Bereich Automation and Drives

Geschaeftsgebiet Industrial Automation Systems

Postfach 4848, D- 90327 Nuernberg

Disclaim of Liability

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be pre-

cluded entirely, we cannot guarantee full agreement. However, the

data in this manual are reviewed regularly and any necessary cor-

rections included in subsequent editions. Suggestions for improve-

ment are welcomed.

Siemens AG 2002

Technical data subject to change.

Siemens Aktiengesellschaft

A5E00075755

This Getting Started offers you step by step instructions on how to install and start SIMATIC Field PG.

Unpacking the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Devices of the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connection to the Power Supply Unit

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Powering Up the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Initial Start of the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Complete restart of the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shut down the SIMATIC Field PG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reinstallation of the Software

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Error Diagnosis

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Further Support and Sales Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

If you are confronted with a technical problem you can find helpful information in the Chapter Error dia-

gnostics. The references to the manual are intended to give you an initial overview of the information in

the manual.

Electronic Manual

You can find the electronic manual on the included CD “Backup PG” under the filename

“HBFieldPG_b.pdf”. This manual offers information on many useful topics, for example, on optional hard-

ware expansion, modification of the device configuration and technical data.

To read or to print out the manual you need the Adobe Acrobat Reader. The Adobe software is

preinstalled on the PC as well as on the CD “Backup PG”.

The manual also includes declarations of conformity with regard to safety and EMC requirements.

Warning

To avoid damage to assets and for the sake of your own personal safety, please take note of the infor-

mation on safety in this user guide and in the electronic manual. These notes are highlighted with trian-

gular warning signs. They are presented in different ways and in accordance with the degree of risk.

Hotline Services

SIMATIC Hotline open round the clock, worldwide:

Worldwide (Nuremberg)

Technical Support

(Free Contact)

Local time: Mon.-Fri. 7:00 to 17:00

Phone:

Worldwide (Nuremberg)

Technical Support

(fee based, only with

SIMATIC Card)

Local time: Mon. to Fri. 0:00 to 24:00

Phone:

+49 (180) 5050-222

+49 (911) 895-7777

Fax:

+49 (180) 5050-223

Fax:

+49 (911) 895-7001

E-Mail:

techsupport@

ad.siemens.de

GMT:

+01:00

GMT:

+1:00

Europe / Africa (Nuremberg)

Authorization

Local time: Mon.-Fri. 7:00 to 17:00

Phone:

U.S.A (Johnson City)

Technical Support and

Authorization

Local time: Mon.-Fri. 8:00 to 19:00

Phone:

Asia / Australia (Singapore)

Technical Support and

Authorization

Local time: Mon.-Fri. 8:30 to 17:30

Phone:

+49 (911) 895-7200

+1 423 461-2522

+65 740-7000

Fax:

+49 (911) 895-7201

Fax:

+1 423 461-2289

Fax:

+65 740-7001

E-Mail:

authorization@

nbgm.siemens.de

E-Mail:

simatic.hotline@

sea.siemens.com

E-Mail:

simatic.hotline@

sae.siemens.com.sg

GMT:

+1:00

GMT:

+8:00

GMT:

–5:00

The languages of the SIMATIC Hotlines are generally German and English, in addition, French, Italian and Spanish are spoken on

the authorization hotline.

Getting Started Field PG

A5E00075755-04

Unpacking the SIMATIC Field PG

Unpack your SIMATIC Field PG as follows:

1. Remove the packing.

2. Do not throw the original packing away. Keep it in case you have to transport the unit again sometime

in the future.

Checking the Contents

3. Check with the packing list to make sure no components are missing.

4. Check the packing and its contents for any shipping or transport damage.

5. Please inform your local dealer of any shipping or transport damages and of outstanding items

indicated on the packing list.

Entering the Serial number (F-No.) and the Ethernet address

6. Enter the serial number and the Ethernet address of your programming device in the table below.

You can find the serial number on the type label attached to the base of the device. The Ethernet ad-

dress can be found in the BIOS setup settings in the main menu under the ’Hardware Options’ func-

tion.

If a PC is stolen and subsequently submitted for repair, the repair center will be able to identify it by the

F-No.

Entering the Microsoft Windows “Product Key” from the “Certificate of Authenticity”

7. Enter the Microsoft Windows “Product Key” from the “Certificate of Authenticity” (COA) in the table.

You will find the “Product Key” on the base of the device. You need the Windows “Product Key” if you

want to reinstall the operating system.

F-No.

Order No.

Microsoft Windows Product Key

Ethernet Address

Installing the SIMATIC Field PG

1. Set up the SIMATIC Field PG to ensure safety and a comfortable posture.

2. Pull the slide lock at the side of the display forward to open the display.

3. Open the display towards the top and adjust it to a comfortable angle of vision. The display can be ad-

justed within any inclination angle from 0 to 180

Display lock

Getting Started Field PG

A5E00075755-04

Devices of the SIMATIC Field PG

View with closed display

SystemLEDs

The system LEDs (battery status

, device

, drives

, MPI/DP MPI/DP and Memory Card

)

indicate the operate state of the rechargeable battery, unit, drives, MPI/DP and Memory Card interface.

These LEDs are also visible when the display is closed. The drive access displays are arranged on the

right hand side of the corresponding drives.

For detailed information on the LED displays refer to Chapter 2.4 of the electronic manual.

KeyboardLEDs

The keyboard LEDs display the current status of the shift keys Num Lock

, Caps Lock

and Scroll

Lock . When the unit is powered up, the displays of these keys are actuated briefly. The keyboard Is

ready for operation.

3 Device handle

Folding handle for transporting the device.

Caution

Always stand the PG on its base. If you place it down on the interface side there is a risk that it will fall

over and damage sensitive components of the unit.

Getting Started Field PG

A5E00075755-04

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: