HBRI25~2.PDF

SIMATIC

PC RI25 P

Manual

C79000-G7076-C798

Edition 02

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal

safety, as well as to protect the product and connected equipment. These notices are

highlighted in the manual by a warning triangle and are marked as follows according to

the level of danger:

Warning

indicates that death, severe personal injury or substantial property damage can result

if proper precautions are not taken.

Note

draws your attention to particularly important information on the product, handling

the product, or to a particular part of the documentation.

Qualified Personnel

The device/system may only be set up and operated in conjunction with this manual.

Only qualified personnel should be allowed to install and work on this equipment.

Qualified persons are defined as persons who are authorized to commission, to ground,

and to tag circuits, equipment, and systems in accordance with established safety

practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the

catalog or the technical description, and only in connection with devices or components

from other manufacturers which have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and

installed correctly, and operated and maintained as recommended.

Trademarks

SIMATIC SIMATIC HMI and SIMATIC NET are registered trademarks of

SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer

to trademarks might infringe upon the rights of the trademark owners.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model

or design, are reserved.

Disclaimer of Liability

We have checked the contents of this manual for agreement with the hardware

and software described. Since deviations cannot be precluded entirely, we cannot

guarantee full agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in subsequent editions.

Suggestions for improvement are welcomed.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie-Automatisierungssysteme

Postfach 4848, D-90327 Nürnberg

Siemens Aktiengesellschaft

Siemens AG 1998

Technical data subject to change.

C79000-G7076-C798

Contents

Safety Instructions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

1.1

General Notes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

1.2

Information Regarding the CE Label

. . . . . . . . . . . . . .

1-5

1.3

Approvals for the USA and Canada

. . . . . . . . . . . . . . .

1-6

1.4

Technical Specifications

. . . . . . . . . . . . . . . . . . . . . . . . .

1-8

Starting Up Your PC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-1

2.1

Unpacking and Checking the Delivery Contents

. . . .

2-1

2.2

Installing Your PC in a 19” Cabinet or Rack (19” Operation)

2-2

2.3

Connecting I/O Devices (such as a Monitor, Mouse, or Keyboard)

2-4

2.4

Connecting the Supply Voltage

. . . . . . . . . . . . . . . . . . .

2-7

Setting Up and Operating Your PC

. . . . . . . . . . . . . . . . . . . . . . .

3-1

3.1

Operator Elements of the System Unit

. . . . . . . . . . . . .

3-2

3.2

Starting Up Your PC for the First Time

. . . . . . . . . . . . .

3-4

3.3

Setting Up Your PC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-6

3.4

Loading the MS-DOS Operating System

. . . . . . . . . . .

3-7

3.5

Loading the Windows 95 Operating System

. . . . . . . .

3-7

3.6

Electronic Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-8

3.7

Installing Adobe Acrobat

. . . . . . . . . . . . . . . . . . . . . . . .

3-9

3.8

Using Adobe Acrobat

. . . . . . . . . . . . . . . . . . . . . . . . . . .

3-11

3.9

SafeCard

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-11

3.10

Backing Up Hard Disk Data on Diskettes

. . . . . . . . . .

3-12

3.11

Safety Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-12

3.12

CD-ROM Drive

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-13

SIMATIC PC

C79000-G7076-C798-02

iii

Contents

Error Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-1

4.1

The PC Does not React to the ON/OFF Switch

. . . . .

4-2

4.2

Problems When Using Modules from Other Manufacturers

4-3

4.3

The Monitor Remains Dark

. . . . . . . . . . . . . . . . . . . . . .

4-4

4.4

The Screen Display Does not Appear or Drifts

. . . . . .

4-5

4.5

No Mouse Pointer Appears on the Screen

. . . . . . . . .

4-6

4.6

The Clock Time and/or the Date in Your PC

Is Incorrect

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-7

4.7

Rebooting Your Hard Drive (Data Deleted)

. . . . . . . . .

4-8

4.8

An Error Message Appears on the Screen

. . . . . . . . .

4-11

4.9

Error Messages During the Self-Test (POST Codes)

4-13

SIMATIC PC Service Representatives

. . . . . . . . . . . . . . . . . . . .

5-1

5.1

Regional Repair Centers

. . . . . . . . . . . . . . . . . . . . . . . .

5-4

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index-1

SIMATIC PC

C79000-G7076-C798-02

Safety Instructions

Chapter

Overview

This chapter provides you with mandatory safety instructions you must

follow when you operate your PC and its components.

This device corresponds to the relevant safety measures according to IEC,

EN, VDE, UL and CSA. If you have questions about the permissibility of

the installation in the designated environment, please confer with our service

representative. Chapter 5 contains the service address locations.

1.1

General Notes

Transport

We recommend that you transport the device only in the original packaging

(protection against shock and impact).

Installation

Condensation can occur if the device is transported from a cold environment

into the operating area. The device must be dry prior to startup. You must

allow for an acclimatization time of at least four hours.

Please observe the notes on ambient conditions in Section 1.4, “Technical

Specifications,” and the installation notes in Chapter 2 of this manual when

installing and operating the device.

Be sure the fan ventilation slots are open so that a sufficient amount of air can

be drawn in to cool the housing interior.

The sliding door in front of the drives on the front side must be kept closed

for safety reasons (fire protection according to UL 1950/EN 60950). You

may open the sliding door only to service the drives. You must not remove

the sliding door.

SIMATIC PC

C79000-G7076-C798-02

1-1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: