Bird House - nesting box.pdf

(50 KB) Pobierz
Bird's Nesting Box
Bird's
Nesti
g
Box
A
and begin considering the spring (it's certainly one way of ignoring the darker
evenings!) In particular, now is the time to start building a bird nesting box so that
when the spring does arrive, your local birds have a nice new home. By putting the
box out in the winter, any human-related smells (such as the smell of the varnish) will
have merged nicely into the more expected aroma of nature by the time the birds
come knocking on the door.
ahead
Construction
Tools required: Sander (preferably belt sander), saw, planer (optional depending on
type of saw used), jigsaw
Wood required: pine
Description
Qty Thickness Length Width
Main wall
7 3/4"
6"
2 1/4"
Back wall
1 3/4"
10"
8 1/4"
Roofing tiles 15 3/4"
9 1/4" 1 3/8"
Base (plywood) 1 1/2"
9 3/4" 5 1/2"
Perch
1 1/4"
2 1/2" 1/4"
Begin the construction by cutting the mail wall pieces to shape and size. Each piece
should be 6" long, with a 45 degree miter at one end (the end that will connect to the
roof). In addition, when ripping the width of the wall pieces they should be cut at an
angle of 15 degrees down each side in order to make the "curved" effect (see
diagram).
Once you have cut the seven wall pieces to shape, cut out the back wall unit. This
piece, as seen in the diagram (left), has straight sides up to a height of 6" and then
angles up to a point at a 45 degree slope. Note that near the apex of this slope, the
wood is mitered to a 45 degree angle to allow the roofing tiles to lie flat.
Now that you have cut out the main and back wall pieces, glue the unit together. Note
that the back wall fits inside the main wall curve. Once all pieces have been applied
with glue and are resting in place, clamp with a band-styled clamp. If you do not have
one of these, wrap masking tape around the entire unit several times to make a strong,
tight, bond.
n
s winter descends upon us, it is time to skip
108353310.002.png 108353310.003.png 108353310.004.png 108353310.005.png
Once the unit is dry, remove the tape and sand the wall until it
forms a smooth curve. It is easier to do this with a band sander,
but with a little patience, a standard sander will suffice. The resu
should be a smooth, semi-circular hut.
lt
Now cut out the roofing tiles to shape. These should be cut at an angle of 12 degrees so that
they start as a point and finish 1 3/8" wide at the end of the 9 1/4" length. At the same time,
these pieces need to be cut at a miter of 12 degrees on one side only (or at an angle of 6
degrees on each side if so desired) so that they follow the curve of the hut wall. Note that you
can make this miter either by using a miter saw, or by using a hand planer.
e roof and make
any necessary modifications. Then, apply glue and place the roofing tiles in place. To clamp,
wrap masking tape around and around the unit to hold it firmly in place.
Once dry, remove the tape and sand the roofing tiles to form a smooth, ro
unded roof.
Now, drill a hole 1 1/2" in diameter to form the doorway to the nesting box. Note that
different species of bird need different doorway sizes. If you are attempting to attract a
particular type of bird, please consult a birdwatcher's book to ensure that you cut the co
size of hole. Next, drill a small hole, 1/4" in diameter just below the main hole. Push the
small dowel that forms the bird perch into this hole and glue it into place. Drill another 1/4"
hole near the top of the back wall of the house. This is used to hook the house onto a nail
is in a tree.
rrect
that
Next, cut the base of the nesting box to shape. To do this, simply draw around the base of the
unit and cut out using a jigsaw. To attach the base to the main hut, use three screws (one in
the middle at the front and one in each back corner). Do not use glue as you will need access
to the bird hut in order to clean it out once in a while.
Finally, stain the nesting box to a darker color and varn
ish it to add a layer of protection.
Once these have been cut to shape, dry fit them to ensure that they match th
108353310.001.png
Zgłoś jeśli naruszono regulamin