Page 3/4
Downloading Phone S/W Binary into the Phone
* How to Download UMTS Qualcomm G800 *
8th May 2007
- Prepare USB [APCBS10UBE] cable for connecting to PC with Mobile.
- Before do this download procedure, Samsung CDMA USB Driver must be in the PC.
- Connect the cable to G800 while you press “9” and “Power” Key (You can see ‘DOWNLOAD’ message on the LCD)
- Run SGH-G800 downloader (MultiLoader 5.30) application as below.
- Tick Boot Change and press Boot and then select ‘BOOTFILES’ in the PC folder
- After connecting the mobile with PC, Multiloader will be find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
- Click Download. [when it is finished you will see the below screen]
- After finished download Please Remove the Battery and then attach again
- Connect the cable to G800 while you press “9” and “End” Key at the same time. (You’ll see ‘DOWNLOAD’ message on the sub_LCD of G800)
- Click Modem Code and select ‘amss.bin’ file which is located in the PC
- Click Rsrc1 and select ‘Rsrc_G800_Open_Europe_Common.rc1’
- Click Rsrc2 and select ‘Rsrc2_G800 (Low/Mid).rc2’
- Click Factory FS and select ‘FactoryFs_G800_Open_Europe_Slav.ffs’
- Click Download [You will see the downloading progress bar].
-After finishing downloading, the mobile will be starting automatically.
Phone automatically resets itself after downloading if not you need to reset by manual as below:
- Detach battery and attach the battery.
- Full reset code: *2767*3855#
- Detach battery and attach the battery again.
- After Downloading, please upgrade camera firmware.
l Put the number *#13579# and then wait for about 80 sec.
l you can see "[6] FlashBurning [SUCCESS]"
- Administration mode : *#6984125*#
- Administration mode -> Internal mode : *#9072641*#
- The End -
MilanFan