WinCC flexible - Runtime.pdf - wincc - romen22

Preface

SIMATIC HMI WinCC flexible 2007 WinCC flexible 2008 Runtime

______________

SIMATIC HMI

______________

WinCC flexible 2008

Runtime

______________

User's Manual

______________

Ordernumber: 6AV6691-1BA01-3AB0

07/2008

A5E01056475-02

WinCC flexible Runtime

Introduction to WinCC

flexible Runtime

Functional scope

System prerequisites

Setting up WinCC flexible

Runtime

Runtime functionality

Operating a project in

Runtime

Appendix

Abbreviations

Glossary

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

WARNING

This device may only be used for the applications described in the catalog or the technical description and only

in connection with devices or components from other manufacturers which have been approved or

recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage,

positioning and assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90327 NÜRNBERG

GERMANY

Ordernumber: 6AV6691-1BA01-3AB0

Ⓟ 07/2008

Technical data subject to change

Safety Guidelines

Preface

Purpose of this manual

This user manual is part of the WinCC flexible documentation.. The manual provides you

with a comprehensive overview of working in WinCC flexible Runtime. The manual supports

you in simulating new projects on your programming computer, in transferrring a project to

an HMI device and in working with WinCC flexible Runtime.

The readership addressed by this manual are newcomers, system migrators, operators and

engineers who are concerned with operation, configuration, commissioning and service

tasks using WinCC flexible.

Basic Knowledge Requirements

General knowledge in the field of automation engineering is required to understand this

manual.

You should also have experience of using PCs running under the Windows 2000 or

Windows XP operating systems.

Scope of the manual

This manual applies to the WinCC flexible 2008 Runtime software package.

Position in the information scheme

This manual is part of the SIMATIC HMI documentation. The information below presents an

overview of the information landscape of SIMATIC HMI.

User manual

● WinCC flexible Micro

– describes the engineering basics based on the WinCC flexible Micro engineering

system (ES)

● WinCC flexible Compact/ Standard/ Advanced

– describes the engineering basics based on the WinCC flexible Compact,

WinCC flexible Standard and WinCC flexible Advanced engineering systems (ES)

● WinCC flexible Runtime:

– Describes how to commission and operate your Runtime project on a PC.

WinCC flexible 2008 Runtime

User's Manual, 07/2008, 6AV6691-1BA01-3AB0

Preface

● WinCC flexible Migration:

– Describes how to convert an existing ProTool project to WinCC flexible.

– Describes how to convert an existing WinCC project to WinCC flexible.

– Describes how to migrate ProTool projects with an HMI migration from OP3 to OP 73

or OP 73 micro.

– Describes how to migrate ProTool projects with an HMI migration from OP7 to OP 77B

or OP 77A.

– Describes how to migrate ProTool projects with an HMI migration from OP17 to

OP 177B.

– describes how to migrate ProTool projects with HMI migration from RMOS graphic

devices to Windows CE devices.

● Communication:

– Communication Part 1 describes the connection of the HMI device to SIMATIC PLCs.

– Communication Part 2 describes the connection of the HMI device to third-party PLCs.

Operating Instructions

● Operating instructions for SIMATIC HMI devices:

– OP 73, OP 77A, OP 77B

– TP 170micro, TP 170A, TP 170B, OP 170B

– OP 73micro, TP 177micro

– TP 177A, TP 177B, OP 177B

– TP 270, OP 270

– MP 270B

– MP 377

● Operating instructions for mobile SIMATIC HMI devices:

– Mobile Panel 170

– Mobile Panel 277

– Mobile Panel 277 IWLAN, Mobile Panel 277F IWLAN

● Operating instructions (compact) for SIMATIC HMI devices:

– OP 77B

– Mobile Panel 170

Getting Started

● WinCC flexible for first time users:

– Based on a sample project, this is a step-by-step introduction to the basics of

configuring screens, alarms, and recipes, and screen navigation.

● WinCC flexible for advanced users:

– Based on a sample project, this is a step-by-step introduction to the basics of

configuring logs, project reports, scripts, user management, and multilingual projects,

and integration into STEP 7.

WinCC flexible 2008 Runtime

User's Manual, 07/2008, 6AV6691-1BA01-3AB0

Preface

● WinCC flexible options:

– Based on a sample project, this is a step-by-step introduction to the basics of

configuring the WinCC flexible Audit, Sm@rtServices, Sm@rtAccess and OPC Server

options.

Online availability

The following link actively guides you to technical documentation for SIMATIC products and

systems in different languages.

● SIMATIC Guide Technical Documentation:

http://www.automation.siemens.com/simatic/portal/html_76/techdoku.htm

Guide

Structure of this manual:

● Introduction to WinCC flexible Runtime – Chapters 1-3

● Commissioning WinCC flexible Runtime – Chapter 4

● Operating in Runtime – Chapters 5-6

● Appendix– Chapter 7

Conventions

This documentation uses the term "HMI device" for all systems operating with WinCC flexible

Runtime.

A distinction is made in the naming conventions for the configuration and runtime software:

● "WinCC flexible" refers to the configuration software.

● "Runtime" designates the runtime software running on the HMI devices.

● "WinCC flexible Runtime" designates the visualization product for use on standard PCs or

panel PCs.

The term "WinCC flexible" is used in the general context. A version name such as

"WinCC flexible 2008" is used whenever it is necessary to distinguish it from other versions.

The following formatting is used to facilitate reading of the manual:

Notation

Scope

"Add screen"

• Terminology that occurs in the user interface, e.g., dialog

names, tabs, buttons, menu commands.

• Inputs required, e.g., limit values, tag values

• Path information

"File > Edit"

Operational sequences, e.g., menu commands/shortcut menu

commands.

Keyboard inputs

WinCC flexible 2008 Runtime

User's Manual, 07/2008, 6AV6691-1BA01-3AB0

WinCC flexible - Runtime.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: