WIMA MKP 10.pdf

(635 KB) Pobierz
WIMA Capacitors
for Good Contact
at High Pulse Ratings
and high capacitances remain unchanged.
The WIMA FKP 4 is a range of self-
healing film/foil Polypropylene capacitors
made with a single metallized plastic
film and metal foil electrodes in series
connection. This construction features a
high volume capacitance and at the same
time high pulse loading capability.
The WIMA FKP 1 series was developed
to withstand extremely high pulse loads.
It has an internal series connection, the
metal foil electrodes being combined
with a floating electrode metallized on
both sides. The metal foil electrodes are
safely contacted on both sides of the end
surfaces. At the same time the capacitor
is fully self-healing due to the floating
electrode metallized on both sides. As
regards pulse loading capability, WIMA
FKP 1 represents the high-end of capacitor
technology.
WIMA pulse capacitors are suitable for
high pulse and high frequency applica-
tions in e.g. swich mode power supplies,
TV and monitor sets, lighting industry,
audio/video equipment, convertes in drives
and power electronics or in electronic
ballasts. They are available with capac-
itances from 100 pF through 15 m F and
with voltage ratings from 100 VDC through
6000 VDC.
An important construction criterion in the
manufacture of reliable, self-healing
capacitors for pulse applications is the
current-carrying capacity of the contacts,
i.e. the connection between the terminating
wires and the electrodes.
WIMA MKP 10
WIMA pulse capacitors are produced
with the proven box technology using
solvent-resistant, flame-retardant plastic
cases according to UL 94 V-0. They are
environmentally compatible with the RoHS
2002/95/EC regulations.
WIMA FKP 4
WIMA FKP 1
The construction principle of the WIMA
MKP 10 series consists of a non-metallized
dielectric film and an carrier film metalliz-
ed on both sides acting as electrode.
Thanks to the metallization on both sides,
the electrical conductivity is considerably
improved and the contact surface between
the electrodes and the schoopage layer
is doubled. This results in better contact
and allows high current and pulse loading
capability. The properties of metallized
capacitors such as excellent self-healing
55
1036145874.127.png 1036145874.138.png 1036145874.148.png 1036145874.159.png 1036145874.001.png 1036145874.012.png
D
WIMA MKP 10
Polypropylene (PP) Capacitors for Pulse Applications with
Double-Sided Metallized Electrodes and Schoopage Contacts
PCM 7.5 mm to 37.5 mm
Special Features
Electrical Data
˜ Pulse duty construction
˜ Self-healing
˜ Very low dissipation factor
˜ Negative capacitance change
versus temperature
˜ According to RoHS 2002/95/EC
Capacitance range:
1000 pF to 15 m F (E12-values on request)
Rated voltages:
100 VDC, 250 VDC, 400 VDC, 630 VDC,
1000 VDC, 1600 VDC, 2000 VDC, 2500 VDC
Capacitance tolerances:
±20%, ±10%, ±5%
Operating temperature range:
–55) C to +100) C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
C T 0.33 mF:  1 x 10 5 M¸
(mean value: 5 x 10 5 M¸)
C  0.33 mF:  30 000 sec (M¸ x mF)
(mean value: 100 000 sec)
Measuring voltage: 100 V/1 min.
Dissipation factors at + 20) C: tan d
Test voltage: 1.6 U r , 2 sec.
Dielectric absorption:
0.05 %
Voltage derating:
A voltage derating factor of 1.35 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life  300 000 hours
Failure rate  1 fit (0.5 x U r and 40) C)
Typical Applications
For pulse applications e.g.
˜ Switch mode power supplies
˜ TV and monitor sets
˜ Lighting
˜ Audio/video equipment
Construction
Dielectric: Polypropylene (PP) film
Capacitor electrodes:
Double-sided metallized plastic film
Internal construction:
at f
C T 0.1 mF
0.1 mF < C T 1.0 mF
C > 1.0 mF
1 kHz
T 3 x 10 -4
T 3 x 10 -4
T 3 x 10 -4
T 4 x 10 -4
T 6 x 10 -4
10 kHz
–
T 15 x 10 -4
100 kHz
–
–
MKP 10: 63 VAC, 180 VAC, 250 VAC
Maximum pulse rise time:
Plastic film
Electrode carrier
plastic film metallized
on both sides
Metal contact layer
(schoopage)
Terminating wire
Capacitance
max. pulse rise time V/msec at T A < 40) C
pF/mF
100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 2500 VDC
1000 ... 2200
1000
1800
1800
1800
2800
5400
9000
11000
3300 ... 6800
900
1200
1200
1200
2800
5400
9000
11000
0.01 ... 0.022
700
1100
1200
1800
2100
3000
3400
11000
0.033 ... 0.068
400
800
900
1800
2100
2100
2100
–
MKP 10: 400 VAC, 600 VAC, 650 VAC, 700 VAC
0.1 ... 0.22
200
500
500
900
1400
1400
1400
–
Plastic film
Electrode carrier
plastic film metallized
on both sides
0.33 ... 0.68
100
300
400
700
900
900
900
–
1.0 ... 2.2
70
200
200
400
400
500
–
–
3.3 ... 4.7
50
80
100
150
–
–
–
–
Plastic film metallized
on one side
6.8 ... 15
35
50
70
–
–
–
–
–
Metal contact layer
(schoopage)
Terminating wire
for pulses equal to the rated voltage
Mechanical Tests
Packing
MKP 10: 900 VAC (PCM 15 = 3-section)
Plastic film
Electrode carrier
plastic film metallized
on both sides
Pull test on pins:
d T 0.8 l : 10 N in direction of pins
d > 0.8 l : 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec 2
in accordance with IEC 60068-2-29
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Plastic film metallized
on one side
Detailed taping information and graphs
at the end of the catalogue.
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations: Tinned wire.
Marking: Colour: Red.
Marking: Black. Epoxy resin seal: Red
For further details and graphs please
refer to Technical Information.
56
1036145874.023.png 1036145874.033.png 1036145874.044.png 1036145874.055.png 1036145874.065.png 1036145874.076.png 1036145874.085.png 1036145874.086.png 1036145874.087.png 1036145874.088.png 1036145874.089.png 1036145874.090.png 1036145874.091.png 1036145874.092.png 1036145874.093.png 1036145874.094.png 1036145874.095.png 1036145874.096.png 1036145874.097.png 1036145874.098.png 1036145874.099.png 1036145874.100.png 1036145874.101.png 1036145874.102.png 1036145874.103.png 1036145874.104.png 1036145874.105.png 1036145874.106.png 1036145874.107.png 1036145874.108.png 1036145874.109.png 1036145874.110.png 1036145874.111.png 1036145874.112.png 1036145874.113.png 1036145874.114.png 1036145874.115.png 1036145874.116.png 1036145874.117.png 1036145874.118.png 1036145874.119.png 1036145874.120.png 1036145874.121.png 1036145874.122.png 1036145874.123.png 1036145874.124.png 1036145874.125.png 1036145874.126.png 1036145874.128.png 1036145874.129.png 1036145874.130.png 1036145874.131.png 1036145874.132.png 1036145874.133.png 1036145874.134.png 1036145874.135.png 1036145874.136.png 1036145874.137.png 1036145874.139.png
 
D
WIMA MKP 10
WIMA FKP 4
Continuation
General Data
100 VDC/63 VAC*
250 VDC/180 VAC*
Capacitance
W
H
L
PCM**
Part number
W
H
L
PCM**
Part number
1000 pF
4
9
10
7.5
MKP1D011002C00_ _ _ _
4
9
10
7.5
MKP1F011002C00_ _ _ _
1500 „
4
9
10
7.5
MKP1D011502C00_ _ _ _
4
9
10
7.5
MKP1F011502C00_ _ _ _
2200 „
4
9
10
7.5
MKP1D012202C00_ _ _ _
4
9
10
7.5
MKP1F012202C00_ _ _ _
3300 „
4
9
10
7.5
MKP1D013302C00_ _ _ _
4
9
10
7.5
MKP1F013302C00_ _ _ _
4700 „
4
9
10
7.5
MKP1D014702C00_ _ _ _
4
9
10
7.5
MKP1F014702C00_ _ _ _
6800 „
4
9
10
7.5
MKP1D016802C00_ _ _ _
4
9
10
7.5
MKP1F016802C00_ _ _ _
0.01 mF
4
9
10
7.5
MKP1D021002C00_ _ _ _
4
9
10
7.5
MKP1F021002C00_ _ _ _
4
9
13
10
MKP1F021003C00_ _ _ _
0.015 „
4
9
10
7.5
MKP1D021502C00_ _ _ _
4
9
10
7.5
MKP1F021502C00_ _ _ _
4
9
13
10
MKP1F021503C00_ _ _ _
0.022 „
4
9
10
7.5
MKP1D022202C00_ _ _ _
4
9
10
7.5
MKP1F022202C00_ _ _ _
4
9
13
10
MKP1F022203C00_ _ _ _
0.033 „
5
10.5
10.3
7.5
MKP1D023302E00_ _ _ _
5
10.5
10.3
7.5
MKP1F023302E00_ _ _ _
4
9
13
10
MKP1D023303C00_ _ _ _
4
9
13
10
MKP1F023303C00_ _ _ _
0.047 „
5
10.5
10.3
7.5
MKP1D024702E00_ _ _ _
5
10.5
10.3
7.5
MKP1F024702E00_ _ _ _
4
9
13
10
MKP1D024703C00_ _ _ _
4
9
13
10
MKP1F024703C00_ _ _ _
0.068 „
5
11
13
10
MKP1D026803F00_ _ _ _
5
11
13
10
MKP1F026803F00_ _ _ _
5
11
18
15
MKP1F026804B00_ _ _ _
0.1 m F
6
12
13
10
MKP1D031003G00_ _ _ _
6
12
13
10
MKP1F031003G00_ _ _ _
5
11
18
15
MKP1F031004B00_ _ _ _
0.15 „
6
12.5
18
15
MKP1D031504C00_ _ _ _
6
12.5
18
15
MKP1F031504C00_ _ _ _
6
15
26.5
22.5
MKP1F031505B00_ _ _ _
0.22 „
7
14
18
15
MKP1D032204D00_ _ _ _
7
14
18
15
MKP1F032204D00_ _ _ _
6
15
26.5
22.5
MKP1F032205B00_ _ _ _
0.33 „
8
15
18
15
MKP1D033304F00_ _ _ _
8
15
18
15
MKP1F033304F00_ _ _ _
6
15
26.5
22.5
MKP1F033305B00_ _ _ _
0.47 „
9
16
18
15
MKP1D034704J00_ _ _ _
9
16
18
15
MKP1F034704J00_ _ _ _
7
16.5
26.5
22.5
MKP1D034705D00_ _ _ _
7
16.5
26.5
22.5
MKP1F034705D00_ _ _ _
0.68 „
8.5
18.5
26.5
22.5
MKP1D036805F00_ _ _ _
8.5
18.5
26.5
22.5
MKP1F036805F00_ _ _ _
9
19
31.5
27.5
MKP1F036806A00_ _ _ _
1.0 mF
10.5
19
26.5
22.5
MKP1D041005G00_ _ _ _
11
21
26.5
22.5
MKP1F041005I00_ _ _ _
11
21
31.5
27.5
MKP1F041006B00_ _ _ _
1.5
„
11
21
31.5
27.5
MKP1D041506B00_ _ _ _
13
24
31.5
27.5
MKP1F041506D00_ _ _ _
13
24
41.5
37.5
MKP1F041507C00_ _ _ _
2.2
„
13
24
31.5
27.5
MKP1D042206D00_ _ _ _
15
26
31.5
27.5
MKP1F042206F00_ _ _ _
13
24
41.5
37.5
MKP1F042207C00_ _ _ _
3.3
„
17
29
31.5
27.5
MKP1D043306G00_ _ _ _
17
34.5
31.5
27.5
MKP1F043306I00_ _ _ _
17
29
41.5
37.5
MKP1F043307E00_ _ _ _
4.7
„
20
39.5
31.5
27.5
MKP1D044706J00_ _ _ _
20
39.5
31.5
27.5
MKP1F044706J00_ _ _ _
17
29
41.5
37.5
MKP1D044707E00_ _ _ _
19
32
41.5
37.5
MKP1F044707F00_ _ _ _
6.8
„
19
32
41.5
37.5
MKP1D046807F00_ _ _ _
20
39.5
41.5
37.5
MKP1F046807G00_ _ _ _
10 mF
20
39.5
41.5
37.5
MKP1D051007G00_ _ _ _
24
45.5
41.5
37.5
MKP1F051007H00_ _ _ _
15
„
24
45.5
41.5
37.5
MKP1D051507H00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x U rms + UDC T U r
** PCM = Printed circuit module = pin spacing
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
W
L
Dims. in mm.
H
P d
PCM
Ionisation inception level in isolated cases may
be lower than admissible AC voltage.
0.6
7.5 - 10
6 -2
d
0.8
15 - 27.5
PCM
at the pin exit points
( 0.4)
1.0
37.5
±
Rights reserved to amend design data without prior notification.
Continuation page 58
57
1036145874.140.png 1036145874.141.png 1036145874.142.png 1036145874.143.png 1036145874.144.png 1036145874.145.png 1036145874.146.png 1036145874.147.png 1036145874.149.png 1036145874.150.png 1036145874.151.png 1036145874.152.png 1036145874.153.png 1036145874.154.png 1036145874.155.png 1036145874.156.png 1036145874.157.png 1036145874.158.png 1036145874.160.png 1036145874.161.png 1036145874.162.png 1036145874.163.png 1036145874.164.png 1036145874.165.png 1036145874.166.png 1036145874.167.png 1036145874.168.png 1036145874.169.png 1036145874.002.png 1036145874.003.png 1036145874.004.png 1036145874.005.png 1036145874.006.png 1036145874.007.png 1036145874.008.png 1036145874.009.png 1036145874.010.png 1036145874.011.png 1036145874.013.png 1036145874.014.png 1036145874.015.png 1036145874.016.png 1036145874.017.png 1036145874.018.png 1036145874.019.png 1036145874.020.png 1036145874.021.png 1036145874.022.png 1036145874.024.png 1036145874.025.png
 
D
WIMA MKP 10
WIMA FKP 4
Continuation
General Data
400 VDC/250 VAC*
630 VDC/400 VAC*
Capacitance
W
H
L
PCM**
Part number
W
H
L
PCM**
Part number
1000 pF
4
9
10
7.5
MKP1G011002C00_ _ _ _
4
9
10
7.5 *
MKP1J011002C00_ _ _ _
1500 „
4
9
10
7.5
MKP1G011502C00_ _ _ _
4
9
10
7.5 *
MKP1J011502C00_ _ _ _
2200 „
4
9
10
7.5
MKP1G012202C00_ _ _ _
4
9
10
7.5 *
MKP1J012202C00_ _ _ _
3300 „
4
9
10
7.5
MKP1G013302C00_ _ _ _
4
9
10
7.5 *
MKP1J013302C00_ _ _ _
4700 „
4
9
10
7.5
MKP1G014702C00_ _ _ _
4
9
10
7.5 *
MKP1J014702C00_ _ _ _
6800 „
4
9
10
7.5
MKP1G016802C00_ _ _ _
4
9
10
7.5 *
MKP1J016802C00_ _ _ _
4
9
13
10
MKP1J016803C00_ _ _ _
0.01 m F
4
9
10
7.5
MKP1G021002C00_ _ _ _
5
10.5
10.3
7.5 *
MKP1J021002E00_ _ _ _
4
9
13
10
MKP1G021003C00_ _ _ _
4
9
13
10
MKP1J021003C00_ _ _ _
0.015 „
5
10.5
10.3
7.5
MKP1G021502E00_ _ _ _
5
11
13
10
MKP1J021503F00_ _ _ _
4
9
13
10
MKP1G021503C00_ _ _ _
5
11
18
15
MKP1J021504B00_ _ _ _
0.022 „
5
10.5
10.3
7.5
MKP1G022202E00_ _ _ _
5
11
13
10
MKP1J022203F00_ _ _ _
4
9
13
10
MKP1G022203C00_ _ _ _
5
11
18
15
MKP1J022204B00_ _ _ _
0.033 „
5.7
12.5
10.3
7.5
MKP1G023302F00_ _ _ _
6
12
13
10
MKP1J023303G00_ _ _ _
5
11
13
10
MKP1G023303F00_ _ _ _
5
11
18
15
MKP1J023304B00_ _ _ _
0.047 „
6
12
13
10
MKP1G024703G00_ _ _ _
6
12.5
18
15
MKP1J024704C00_ _ _ _
5
11
18
15
MKP1G024704B00_ _ _ _
6
15
26.5
22.5
MKP1J024705B00_ _ _ _
0.068 „
6
12.5
18
15
MKP1G026804C00_ _ _ _
7
14
18
15
MKP1J026804D00_ _ _ _
6
15
26.5
22.5
MKP1G026805B00_ _ _ _
6
15
26.5
22.5
MKP1J026805B00_ _ _ _
0.1 mF
7
14
18
15
MKP1G031004D00_ _ _ _
9
16
18
15
MKP1J031004J00_ _ _ _
6
15
26.5
22.5
MKP1G031005B00_ _ _ _
7
16.5
26.5
22.5
MKP1J031005D00_ _ _ _
0.15 „
8
15
18
15
MKP1G031504F00_ _ _ _
8.5
18.5
26.5
22.5
MKP1J031505F00_ _ _ _
6
15
26.5
22.5
MKP1G031505B00_ _ _ _
9
19
31.5
27.5
MKP1J031506A00_ _ _ _
0.22 „
9
16
18
15
MKP1G032204J00_ _ _ _
8.5
18.5
26.5
22.5
MKP1J032205F00_ _ _ _
7
16.5
26.5
22.5
MKP1G032205D00_ _ _ _
9
19
31.5
27.5
MKP1J032206A00_ _ _ _
0.33 „
8.5
18.5
26.5
22.5
MKP1G033305F00_ _ _ _
11
21
26.5
22.5
MKP1J033305I00_ _ _ _
9
19
31.5
27.5
MKP1G033306A00_ _ _ _
11
21
31.5
27.5
MKP1J033306B00_ _ _ _
0.47 „
10.5
19
26.5
22.5
MKP1G034705G00_ _ _ _
11
21
31.5
27.5
MKP1J034706B00_ _ _ _
9
19
31.5
27.5
MKP1G034706A00_ _ _ _
0.68 „
11
21
26.5
22.5
MKP1G036805I00_ _ _ _
15
26
31.5
27.5
MKP1J036806F00_ _ _ _
11
21
31.5
27.5
MKP1G036806B00_ _ _ _
13
24
41.5
37.5
MKP1J036807C00_ _ _ _
1.0 m F
13
24
31.5
27.5
MKP1G041006D00_ _ _ _
17
29
31.5
27.5
MKP1J041006G00_ _ _ _
13
24
41.5
37.5
MKP1G041007C00_ _ _ _
15
26
41.5
37.5
MKP1J041007D00_ _ _ _
1.5
„
17
29
31.5
27.5
MKP1G041506G00_ _ _ _
20
39.5
31.5
27.5
MKP1J041506J00_ _ _ _
13
24
41.5
37.5
MKP1G041507C00_ _ _ _
19
32
41.5
37.5
MKP1J041507F00_ _ _ _
2.2
„
20
39.5
31.5
27.5
MKP1G042206J00_ _ _ _
20
39.5
41.5
37.5
MKP1J042207G00_ _ _ _
17
29
41.5
37.5
MKP1G042207E00_ _ _ _
3.3
„
20
39.5
41.5
37.5
MKP1G043307G00_ _ _ _
24
45.5
41.5
37.5
MKP1J043307H00_ _ _ _
4.7
„
20
39.5
41.5
37.5
MKP1G044707G00_ _ _ _
6.8
„
24
45.5
41.5
37.5
MKP1G046807H00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x U rms + UDC T U r
** PCM = Printed circuit module = pin spacing
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
* Admissible AC voltage 280 VAC max.
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible AC voltage.
Rights reserved to amend design data without prior notification.
Continuation page 59
58
1036145874.026.png 1036145874.027.png 1036145874.028.png 1036145874.029.png 1036145874.030.png 1036145874.031.png 1036145874.032.png 1036145874.034.png 1036145874.035.png 1036145874.036.png 1036145874.037.png 1036145874.038.png 1036145874.039.png 1036145874.040.png 1036145874.041.png 1036145874.042.png 1036145874.043.png 1036145874.045.png 1036145874.046.png 1036145874.047.png 1036145874.048.png 1036145874.049.png 1036145874.050.png 1036145874.051.png 1036145874.052.png 1036145874.053.png 1036145874.054.png 1036145874.056.png
 
D
WIMA MKP 10
WIMA FKP 4
Continuation
General Data
1000 VDC/600 VAC*
1600 VDC/650 VAC*
Capacitance
W
H
L
PCM**
Part number
W
H
L
PCM**
Part number
1000 pF
4
9
10
7.5
MKP1O111002C00_ _ _ _
4
9
13
10
MKP1T011003C00_ _ _ _
4
9
13
10
MKP1O111003C00_ _ _ _
1500 „
4
9
10
7.5
MKP1O111502C00_ _ _ _
4
9
13
10
MKP1T011503C00_ _ _ _
4
9
13
10
MKP1O111503C00_ _ _ _
2200 „
4
9
10
7.5
MKP1O112202C00_ _ _ _
4
9
13
10
MKP1T012203C00_ _ _ _
4
9
13
10
MKP1O112203C00_ _ _ _
3300 „
4
9
10
7.5
MKP1O113302C00_ _ _ _
4
9
13
10
MKP1T013303C00_ _ _ _
4
9
13
10
MKP1O113303C00_ _ _ _
4700 „
4.5
9.5
10.3
7.5
MKP1O114702D00_ _ _ _
5
11
13
10
MKP1T014703F00_ _ _ _
4
9
13
10
MKP1O114703C00_ _ _ _
6800 „
5.7
12.5
10.3
7.5
MKP1O116802F00_ _ _ _
6
12
13
10
MKP1T016803G00_ _ _ _
5
11
13
10
MKP1O116803F00_ _ _ _
5
11
18
15
MKP1T016804B00_ _ _ _
0.01 m F
5
11
13
10
MKP1O121003F00_ _ _ _
5
11
18
15
MKP1T021004B00_ _ _ _
5
11
18
15
MKP1O121004B00_ _ _ _
0.015 „
6
12
13
10
MKP1O121503G00_ _ _ _
6
12.5
18
15
MKP1T021504C00_ _ _ _
5
11
18
15
MKP1O121504B00_ _ _ _
6
15
26.5
22.5
MKP1T021505B00_ _ _ _
0.022 „
6
12.5
18
15
MKP1O122204C00_ _ _ _
7
14
18
15
MKP1T022204D00_ _ _ _
6
15
26.5
22.5
MKP1O122205B00_ _ _ _
6
15
26.5
22.5
MKP1T022205B00_ _ _ _
0.033 „
7
14
18
15
MKP1O123304D00_ _ _ _
8
15
18
15
MKP1T023304F00_ _ _ _
6
15
26.5
22.5
MKP1O123305B00_ _ _ _
6
15
26.5
22.5
MKP1T023305B00_ _ _ _
0.047 „
8
15
18
15
MKP1O124704F00_ _ _ _
7
16.5
26.5
22.5
MKP1T024705D00_ _ _ _
6
15
26.5
22.5
MKP1O124705B00_ _ _ _
9
19
31.5
27.5
MKP1T024706A00_ _ _ _
0.068 „
7
16.5
26.5
22.5
MKP1O126805D00_ _ _ _
10.5
19
26.5
22.5
MKP1T026805G00_ _ _ _
9
19
31.5
27.5
MKP1T026806A00_ _ _ _
0.1 mF
8.5
18.5
26.5
22.5
MKP1O131005F00_ _ _ _
11
21
26.5
22.5
MKP1T031005I00_ _ _ _
11
21
31.5
27.5
MKP1O131006B00_ _ _ _
11
21
31.5
27.5
MKP1T031006B00_ _ _ _
0.15 „
11
21
26.5
22.5
MKP1O131505I00_ _ _ _
13
24
31.5
27.5
MKP1T031506D00_ _ _ _
11
21
31.5
27.5
MKP1O131506B00_ _ _ _
0.22 „
11
21
31.5
27.5
MKP1O132206B00_ _ _ _
15
26
31.5
27.5
MKP1T032206F00_ _ _ _
13
24
41.5
37.5
MKP1T032207C00_ _ _ _
0.33 „
15
26
31.5
27.5
MKP1O133306F00_ _ _ _
17
34.5
31.5
27.5
MKP1T033306I00_ _ _ _
13
24
41.5
37.5
MKP1O133307C00_ _ _ _
17
29
41.5
37.5
MKP1T033307E00_ _ _ _
0.47 „
17
29
31.5
27.5
MKP1O134706G00_ _ _ _
20
39.5
31.5
27.5
MKP1T034706J00_ _ _ _
13
24
41.5
37.5
MKP1O134707C00_ _ _ _
19
32
41.5
37.5
MKP1T034707F00_ _ _ _
0.68 „
20
39.5
31.5
27.5
MKP1O136806J00_ _ _ _
20
39.5
41.5
37.5
MKP1T036807G00_ _ _ _
17
29
41.5
37.5
MKP1O136807E00_ _ _ _
1.0 m F
20
39.5
41.5
37.5
MKP1O141007G00_ _ _ _
24
45.5
41.5
37.5
MKP1T041007H00_ _ _ _
1.5
„
24
45.5
41.5
37.5
MKP1O141507H00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x U rms + UDC T U r
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
Ionisation inception level in isolated cases may be
lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
Continuation page 60
59
1036145874.057.png 1036145874.058.png 1036145874.059.png 1036145874.060.png 1036145874.061.png 1036145874.062.png 1036145874.063.png 1036145874.064.png 1036145874.066.png 1036145874.067.png 1036145874.068.png 1036145874.069.png 1036145874.070.png 1036145874.071.png 1036145874.072.png 1036145874.073.png 1036145874.074.png 1036145874.075.png 1036145874.077.png 1036145874.078.png 1036145874.079.png 1036145874.080.png 1036145874.081.png 1036145874.082.png 1036145874.083.png 1036145874.084.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin