****************************************************************************** Release Notes for Vigor2110 series Firmware Version : 3.6.3 (Release) Release Date : 9th January 2013 Build Date : 16th October 2012 Applicable Models : Vigor2110, Vigor2110n, Vigor2110Vn Locale : UK Only / Annex A Only ****************************************************************************** [New Features] 1. IPv6 support added 2. Smart Bandwidth Limit support added 3. Support for QoS DiffServ retagging added 4. VoIP Wizard added [Improvement] 1. Corrects an issue that could cause Dynamic DNS to force update even though there was no WAN IP change 2. Removed incorrect PPP start (xxx) log entry where incoming client is unknown prior to CHAP/PAP authentication 3. Addresses an issue that would prevent Android phone from obtaining FTP file list from Vigor 2110 FTP server 4. Corrects an issue where NAT port redirection for a WAN1 Alias IP doesn't work when port redirection setting doesn't specifically list the Alias 5. Addresses an issue with True IP DMZ 6. Wireless country string corrected 7. Addresses an issue that could occur with the wireless AP Discovery feature 8. User can send fax using both T.38 protocol and G.711 9. Resolves an issue which would prevent IP Phones behind the Vigor 2110 from registering after a WAN failover because the router would sent UDP packets with a source port of 0. 10. DHCP Relay via VPN tunnel fixed 11. Addresses an issue with GRE IPsec tunnels 12. Resolves an issue that would prevent AES192 or AES 256 being used as the IKE proposal if AES without authentication is selected as the IPSec Security method 13. URL Content Filter Syslog improved so that it displays HTTP or HTTPS 14. Fixed an issue that could case CPE to loss connection when it connects to VigorACS server with STUN server. 15. WCF service stability improved 16. Correct error with Secondary DNS displayed in Online Status 17. Clear button added to SIP account page 18. DHCP server lease time added 19. Syslog improved to show which devices have been allocated IP by router 20. Added support to allow the router to send the TR-069 packet out via LAN interface 21. Support GRE over IPsec with CISCO. (4 bytes GRE header) 22. Modified the default pool size of LAN DHCP server from 50 to 150. 23. Added new DDNS provider (UBDdns, Oray, and Peanut Shell). 24. Improve Samba compatibility with Mac OS X. 25. Bandwidth Limit range changed to 0 - 30000 26. Port Redirection can shows WAN Interface for each rule in the main page. 27. Application Filter updated to support dropbox version 1.4.11 and skype version 5.10.56.116. 28. "Undefined Protocol" DoS defense function renamed as "Unassigned Numbers" 29. Updated 3G modem support including MF190J, AnyDATA ADU-500A, LG VL600 LTE, and LTE Yota LU150. 30. Improve the connection performance for Huawei E398/K5005 and Sierra 320U dongle. 31. Default QoS setting changed to disabled for non-VoIP models 32. QoS for VoIP enhanced 33. ALG for SoftPhone Polycom and lift-size improved 34. VPN Profile WUI improved 35. UCF/WCF block web page modified 36. SNMP's sysDescr now shows model name and firmware version. 37. TR-069 support added for IP Route subnet parameters, firewall parameters, RADIUS parameters, WAN Connection Detection and SysLog / Mail Alert Setup parameters 38. 3G WAN connection Signal parameter status added to TR-069 Renamed TR-069 parameter "InternetGatewayDevice.X_00507F_Firewall.DoSDefense.BlockUnknownProto" to "InternetGatewayDevice.X_00507F_Firewall.DoSDefense.BlockUnassignedNum" 39. ip arp accept telnet command changed to give separate control over behaviour (pass or block) for both incorrect source mac and incorrect destination mac. 'ip arp accept <0/1/2/3/status>' 40. IGMP Query packet interval time command added: 'ip igmp_proxy query [msec]' 41. VoIP Flash hook minimum and maximum time command added to CLI/telnet 42. Added a telnet command to allow VPN packets to instaed go through by NAT if VPN disconnected 'vpn pass2nat <on/off>' ****************************************************************************** Release Notes for Vigor2110 series Firmware Version : 3.3.7 (Release) Release Date : 21st June 2012 Build Date : 7th May 2012 Applicable Models : Vigor2110, Vigor2110n, Vigor2110Vn Locale : UK Only / Annex A Only ****************************************************************************** [New Features] 1. Supports sending Syslog via email. 2. Supports auto-detection of other locally connected DrayTek devices. 3. Added Address Mapping under the NAT menu. 4. Supports hardware MD5/SHA1 encryption. 5. Supports Syslog Explorer with Web Syslog and USB Syslog under the USB Application menu. 6. Allow Mail Alert to send emails with VPN notifications. 7. Supports DDNS when using the 3G backup connection. 8. Supports login customization (can be configured in System Maintenance > Login Customization). 9. Supports SMS service to send notification when the WAN connection fails (requires 3G backup & SMS service account) [Improvement] [VoIP] 1. Improved: Added a telnet command to disable/enable internal VoIP service "voip sip misc -D" on 2110Vn. 2. Improved: Added telnet command for adjusting the volume of call waiting tone. 3. Improved: SIP address format (either Withheld@X or anonymous@X ) can be blocked if Block Anonymous under VoIP>>DialPlan>>Call Barring is configured. 4. Improved: Incoming calls with SIP from header field without having an account name (e.g., tagged with 5E623524-172D) can be blocked if Block Anonymous under VoIP>>DialPlan>>Call Barring is configured. 5. Corrected: VoIP call may drop after 2-3 minutes. [WAN] 6. Corrected: WAN cannot get IP from DHCP server when Block Fraggle Attack is checked under Firewall > DoS Defense. 7. Corrected: Ping detection fails when the target IP and gateway are in the same subnet. [General] 8. Improved: Added a telnet command to set user-defined custom DHCP options "srv dhcp custom_option" 9. Improved: Supports disabling/enabling user mode in the web interface. The factory default setting is disabled. 10. Improved: Improved compatibility with VigorACS SI v1.08. 11. Improved: Corrected some LAN status SNMP information. 12. Improved: Shows correct German umlauts in Samba server. 13. Improved: A Reboot could occur while printing with the USB port for some printers. 14. Corrected: QoS may not work correctly if the firewall is disabled. 15. Corrected: Data Flow Monitor did not show TX & RX value for the monitored IP address when using WAN on PPTP Host-LAN environment. 16. Corrected: RIP over VPN may not work. 17. Corrected: My WAN IP setting does not work when using PPTP in NATted VPN mode. 18. Corrected: Buffer leakage occurs when IPSec Aggressive mode is used and configured with a local IP address. 19. Corrected: User-Based mode of user management does not work if HTTPS management port has been changed. 20. Corrected: Firewall caused a problem with SIP registrations. 21. Corrected: If a URL block profile is set to block ?xxxxxx?. Syslog would display http://xxxxxx when a user visits https://xxxxxx. 22. Corrected: Removed "Ultrasurf" from App Enforcement. 23. Corrected: VPN assigns wrong IP when the subnet is smaller than /24 and the DHCP server is disabled. 24. Corrected: Web user interface inaccessible through VPN tunnel (Telnet interface still works). 25. Corrected: VPN via 3G may fail to connect when WAN1 is connected. 26. Corrected: Firewall could not block internal routing subnet packets. ****************************************************************************** Release Notes for Vigor2110 series Firmware Version : 3.3.6 (Release) Build Date : 14th March 2011 Applicable Models : Vigor2110n, Vigor2110Vn Locale : UK Only ****************************************************************************** [New Features] 1. Add Web Content Filter (WCF) Service Activation Wizard. 2. Add Bridge mode setting for PPPoE connection and Static or Dynamic IP connection of Internet Access. 3. Add APP QoS to Firewall [Improvments] 1. Corrected: 3G backup is unable to work when the backup type is chosen as the active mode. 2. Corrected: A crash occurs if a space bar is pressed after typing "qos class -V 1" telnet command. 3. Corrected: Domain name cannot be used in STUN server IP field in TR-069 web page. 4. Corrected: Some logical mistakes about file finding for USB storage occurred. 5. Corrected: Samba server cannot display correct German information. 6. Corrected: Set default Busy tone and Congestion tone parameters for UK. 7. Corrected: A crash occurred while clicking Firewall>>General Setup page or view Filter Rule. 8. Corrected: When SNMP scans 1.3.6.1.2.1.4.20.1.1, the router returns 0.0.0.0 in WAN PPP mode. 9. Corrected: IPSec VPN LAN to LAN tunnel cannot be up when WAN2 First is selected. 10. Corrected: IPSec AES in Phase I cannot be supported for Aggressive Mode. 11. Corrected: Access list blocks router web page from remote VPN network. 12. Corrected: May meet buffer leakage while L2TP over IPSec is chosen for VPN and PPTP/PPPoE is chosen for WAN. 13. Corrected: NAT loopback doesn't work properly in PPPoE connection for ARP of WAN client can not pass through 2nd subnet of LAN. 14. Corrected: Incorrect Probe Response content packet will be sent to wireless client in wireless connection. 15. Corrected: Wireless connection may drop the connection in some circumstances. 16. Corrected: Modify the Syslog prompt of the wireless security setting. 17. Corrected: Anonymous calls cannot be blocked. 18. Corrected: VoIP debug show message cannot be duplicated to Syslog tool. 19. Improved: Add a new telnet command and switch function to enable flow control for WAN1ethernet PHY. "port wanfc 1 [on/off...
TirNaNog