****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.5.3 (Formal Release) Release Date : 6th Sept 2012 Build Date : 28th August 2012 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] 1. Support added for Oray Peanuthull DDNS [Improvements] 1. Solved an issue where remote dial-in VPN wouldn't connect if LAN to LAN VPN dial-out is enabled as default gateway 2. Fixed: Ignore the ARP information from VRRP packets. 3. Change the website for the myvigor portal from www.vigorpro.com to myvigor.draytek.com 4. Increased TCP re-transmission time to improve USB modem 3G connection for TR-069 5. 3G connection information and Firewall parameter added for TR-069 6. Support TR-069 connection via VPN tunnel. 7. Port Mirror function added to web configurator 8. ROYAL R220, Huawei E173 (3G USB modem) now supported ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.5.2 (Formal Release) Build Date : 8th November 2011 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] None [Improvement] 1. Solved PPPoE connection inter-operability issue with some ISPs 2. Resolved Configuration backup issue with TR-069 settings 3. Wireless connection parameters added for TR-069 4. Support IPSEC X.509 with Cisco Router for VPN 5. Support VoIP call via VPN 6. Improved support for Huawei E173, Nokia CS11/CS12, Alcatel X200L, ZTE MF110/MF190/K3571-Z 7. Added support for accessing WUI by using Safari browser for web authentication. 8. Support DDNS service through freedns.afraid.org 9. Support add/delete object for TR-069 ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.5.1 (Formal Release) Build Date : 5th January 2011 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] 1. Support Diffie Hellman G5 and AES256 (Phase II) for IPSec. 2. Support Static Route, RFC3442, DHCP Option 121, DHCP Option 33 for DHCP clients. 3. Support Alcatel x200x3G modem, Globe Trotter GI1505, Bandluxe C331/C321, Vodafone K3570-z, Huawei E122 4. Support Product Registration on WUI [Improvement] 1. An issue occurs if ?\? is used in Pre-Shared Key. 2. Resolved an issue with WAN throughput if Bandwidth Limit is value is set too high 3. Resolved an issue where 2nd DHCP client gets wrong gateway IP 4. Addressed an issue that could prevent a SIP Account from registering after 3 days 5. Resolved compatibility issue with munin 6. Solved an issue where VPN trigger packet cannot be hold by the router. 7. Corrected an issue where CPE would send IP Address rather than domain name to ACS Server 8. Solved compatibility issue where unknown CCP configuration request could prevent VPN from establishing 9. Solved X.509 VPN compatibility issue with PIX Firewall 10. Correctd date timestamp issue with FTP USB disk 11. Linux VPN compatibility issue resolved 12. Fixed an issue with HTTPs based TR-069 communication with VigorACS server 13. Solved an issue where PPPoE cannot be used to connect to Internet with specified ISP in WAN2 14. L2PT/IPSEC interoperability issue with Windows 7 & iphone 3G resolved 15. Corrected GRE checksum errors for GRE over IPSec 16. UPnP device Attribute/property field modified [Known Issues] None ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.4 (Formal Release) Release Date : 6th May 2010 Build Date : 15th March 2010 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] 1. Support mOTP (Mobile One Time Password) for VPN connection. 2. Support Apple iPhone 3G / 3GS as a 3G connection (extra iPhone utility needed). 3. Support VigorACS SI. [Improvement] 1. Resolved web interface display issue in Internet Explorer 8.0 ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.3.1 (Formal Release) Release Date : 24th November 2009 Build Date : 13th October 2009 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] 1. Support Web Authentication for LAN PC. 2. Support Address Mapping that makes LAN PC being able to select outgoing WAN IP Alias. 3. Support for NEC IPPBX for VoIP 4. Add telnet commands of "srv dhcp primWINS? and ?srv dhcp secWINS". 5. Add idle timeout for 3G application and PAP only settings in WUI. [Improvement] 1. Update SIP ALG to support 5 VoIP clients ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.1 (Formal Release) Release Date : 4th September 2008 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] 1. Support more applications for CSM V2 lite version. 2. Support long filename for FTP Server of USB Disk. 3. Add 3G signal strength display in Online Status (for some 3G adaptors) 4. Support VPN remote dial in user for bandwidth limit. 5. Support VPN through second routing subnet (telnet command: vpn pass2nd on/off). 6. DNS servers can be set for WAN1 and WAN2 respectively. 7. Support different channels for wireless AP Discovery. [Improvement] 1. Corrected: the router cannot process RIP packet over IPSec tunnel through VPN. 2. Corrected: when the WAN connection is active, LAN broadcast call (for VoIP) will fail. 3. Corrected: default SIP Account always uses first SIP account. 4. Corrected: when the phone is hung up, ??call forward?? still cannot be cancelled. 5. Corrected: Web firmware upgrade cannot work normally under FireFox3. 6. Corrected: Apple MAC cannot detect UPnP device in PPPoE mode. 7. Improve the compatibility problem between Filezilla and Firefox for FTP server. ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.2.0 (Formal Release) Release Date : 12th June 2008 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [ New Functions ] 1. Support WAN2 IP alias. 2. New built-in FTP server - connect a memory stick to USB port 3. Support USB mass storage function - connect a memory stick to USB port 4. Support VPN Server and Client Setup Wizard. ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.1.3 (Formal Release) Release Date : 17th March 2008 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [ New Functions ] 1. Show Netbios Name in dataflow monitor and arp table. 2. Bandwidth Limit support IP group limit. 3. Implement a new DynDNS Provider TwoDNS for Germany. [Improvement and Corrections] 1. Improve P2P application stability. 2. Imrprove 3G stability 3. 3G now supports Nokia N73, Nokia E65, C-Motech D-50, Sierra 875U, ASUS T500 Modem 4. VPN support MTU settings. (via telnet command: vpn mss) 5. Improve VPN interoperability. 6. USB Support Cannon MF4600 printer. ****************************************************************************************** Release Notes for Vigor2910 series Firmware Version : 3.1.2 (Formal Release) Release Date : 12th November 2007 Locale : UK Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [Improvements ] 1. Fix 3G upload disconnections issue. ****************************************************************************************** Release Notes for Vigor 2910 series Firmware Version : 3.1.1 Release Date : Oct 17, 2007 Applicable Models : Vigor2910, Vigor2910G, Vigor2910VG, Vigor2910VGi ****************************************************************************************** [New Features] 1. 3G support Nokia N95 mobile phone. [Improvements & Corrected Problems] 1. Improve ISDN Fax stability. 2. Fix DHCP can't work when IP bind MAC in strict bind mode 3. Some minor fixes. ****************************************************************************************** Release Notes for Vigor 2910 series Firmware Version : 3.1.0.1 Release Date : Oct. 8, 2007 Applied Models : Vigor2910, Vigor2910V, Vigor2910G, Vigor2910VG ****************************************************************************************** [New Features] 1. Add TR069 CPE WAN Management Protocol, need to work with DrayTek ACS Server...
TirNaNog