1800 SERIES.pdf

(5089 KB) Pobierz
1800Final
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
1800 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 1)
2. 5mm Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
49472366.052.png 49472366.063.png 49472366.074.png 49472366.085.png 49472366.001.png 49472366.003.png 49472366.004.png 49472366.005.png 49472366.006.png 49472366.007.png 49472366.008.png 49472366.009.png 49472366.010.png 49472366.011.png 49472366.012.png 49472366.013.png 49472366.014.png 49472366.015.png 49472366.016.png 49472366.017.png 49472366.018.png 49472366.019.png 49472366.020.png 49472366.021.png 49472366.022.png 49472366.023.png 49472366.024.png 49472366.025.png 49472366.026.png 49472366.027.png 49472366.028.png 49472366.029.png 49472366.030.png 49472366.031.png 49472366.032.png 49472366.033.png 49472366.034.png 49472366.035.png 49472366.036.png 49472366.037.png 49472366.038.png 49472366.039.png 49472366.040.png 49472366.041.png 49472366.042.png 49472366.043.png 49472366.044.png 49472366.045.png 49472366.046.png 49472366.047.png 49472366.048.png 49472366.049.png 49472366.050.png 49472366.051.png 49472366.053.png 49472366.054.png 49472366.055.png 49472366.056.png 49472366.057.png 49472366.058.png 49472366.059.png 49472366.060.png 49472366.061.png 49472366.062.png 49472366.064.png 49472366.065.png 49472366.066.png 49472366.067.png 49472366.068.png 49472366.069.png 49472366.070.png 49472366.071.png 49472366.072.png 49472366.073.png 49472366.075.png 49472366.076.png 49472366.077.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
1800 Series
TOSHIBA
Tough Enough for Today’s World
TM
49472366.078.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1800 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
PC card
Battery pack
Battery
release lever
PC card lock
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Slide the battery pack to the right and lift it out.
1. Slide the PC Card lock to unlock position
2. Press the eject button to pop it out.
3. Press the eject button and remove the PC card .
NOTE : Before removing any PCCARD device, make
sure it is “STOPPED” in the PC Card Manager.
HDD REMOVAL
HDD assembly
M2.5x4 black
flat head screw
HDD bracket handle
HDD slot cover
M2.5x4 black flat head screw
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw securing
HDD slot cover and pull out the cover .
3. Remove one M2.5x4 black flat head screw
securing the HDD assembly.
4 Grasp the HDD bracket handle and pull to
disconnect the HDD assembly.
5. Lift the HDD assembly out of the HDD bay.
.
TOSHIBA
Tough Enough for Today’s World
49472366.079.png 49472366.080.png 49472366.081.png 49472366.082.png 49472366.083.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1800 Series
HDD REMOVAL
MEMORY MODULE REMOVAL
M2.5x4 black
flat head screws
Memory cover
Memory
module
M3x4 Flat head screws
HDD bracket
Memory clips
6. Remove four M3x4 flat head screws securing the
HDD bracket to the drive.
1. Turn the computer upside down.
2. Remove two M2.5x4 black flat head screws and
remove the memory cover .
3. Push the memory clips outward and pull the
memory module out of the connector on a
30 degree angle.
MINI PCI CARD REMOVAL
PCI clips
M2.5x4
black torx
screws
Mini PCI card
Mini PCI slot cover
1. Turn the computer upside down.
2. Remove two M2.5x4 black torx screws securing the mini
PCI slot cover.
3. Push the mini PCI slot clips outward and pull the
mini PCI card out of the connector on a 45 degree
angle.
TOSHIBA
Tough Enough for Today’s World
49472366.084.png 49472366.086.png 49472366.087.png 49472366.088.png 49472366.089.png 49472366.090.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1800 Series
MODEM REMOVAL
M2x4 brass screws
RJ11 Jack
Modem slot cover
M2.5x4 black flat head screw
Modem
1. Remove one M2.5x4 black flat head screw securing
the modem slot cover.
2. Insert the case separator into the notched side of the
cover and lift up to release the two latches securing
the left side of the modem slot cover .
3. Remove the glass tape securing the RJ-11 jack cable.
4. Remove two M2x4 brass screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
6. Remove the RJ-11 jack from the modem board.
KEYBOARD REMOVAL
Latch
Keyboard holder
M2.5x2.6 black screws
1. Open the display panel.
2. Remove the Keyboard holder at the top of the
keyboard.
3. Remove two M2.5x2.6 black screws securing the
keyboard.
TOSHIBA
Tough Enough for Today’s World
49472366.091.png 49472366.092.png 49472366.093.png 49472366.094.png 49472366.095.png 49472366.002.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin