paperwork.pdf

Geometric Design

By Valerie Prettyman

Materials Required:

A piece of wrapping paper 11cm x 11cm.

3mm quilling paper:

2 white, 2 pink, 2 beige and 1 black,

or colours to suit the background and card.

1 sticky fixer pad (cut into four).

Glue.

Sticky tape.

Card mount - AP04U.

To Make The Card:

Place the card face down and glue the

wrapping paper onto the left hand panel so it

will show through the aperture.

Using the pink, white and beige quilling

paper, weave into the diagonal design as

shown below. Trim off excess paper and tape

into position on the inside of the aperture. Glue

is unsuitable as it will make the card too wet.

Turn the card face up and weave the black

piece of quilling paper downwards through the

diagonal strands (see illustration left). After fold-

ing the ends in opposite directions stick this piece

to the front of the card with a tiny dab of glue.

Open out the card and place the four pieces of

sticky fixer pad on the inside of the card as shown

above. This will keep some space between the

background and the woven papers adding depth

to the design. Lastly glue the card edges closed.