VAG-COM 704.pdf

VAG-COM Release 704

PDF Manual Printing Instructions:

You should tell your PDF reader to "Fit to

Printable Area" or use similar instructions

when printing in order to make the images

and text as legible as possible.

VAG-COM

COM

Diagnostic Software for VW/Audi/SEAT/Skoda

PDF User’s Manual

Release 704

by Ross-Tech, LLC.

920 South Broad Street

Lansdale, PA 19446

+1-215-361-8942

www.Ross-Tech.com

Disclaimer:

or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of

Ross-Tech, LLC. The information contained herein is designed only for use with VAG-COM diagnostic software. Ross-

Tech, LLC. is not responsible for any use of this information as applied to this or other diagnostic equipment.

Neither Ross-Tech, LLC. nor its affiliates shall be liable to the purchaser of this product or third parties for damages,

losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product

or unauthorized modifications, repairs, or alterations to this product, or failure to comply with Ross-Tech, LLC’s written

instructions.

By using VAG-COM, you acknowledge that this Program is provided "as is" and "with all faults, defects and errors" and

that all use of the Program is at your own full risk. It has been extensively tested, but we cannot guarantee it will work

correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we

specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular

enhancements available on any specific date.

VAG

COM

VAG-COM

Table of Contents

Getting Started

3-5

Main Screen

Select Control Module

Open Controller

9-10

Fault Codes

11-12

Measuring Blocks

13-16

Data Logging

17-18

Single Reading

Supported Codes

Readiness

21-23

Advanced Identification

Advanced Measuring Blocks

25-26

7-digit PIN/SKC Dialog

28-29

Basic Settings

30-31

Output Tests

32-34

Recode / Long Coding

35-39

Adaptation

40-41

Security Access

Auto-Scan

43-46

Control Module Finder

Generic OBD2

Applications

49-53

Options

54-57

About

Appendix A: Problems & Issues

59-60

Appendix B: FAQ ( Frequently Asked Questions )

61-70

Appendix C: USB Driver Installation for W98/ME

71-74

Appendix D: VAG-Scope

75-78

Appendix E: TDI Timing Checker

79-80

Appendix F: VAG Functions

VAG-COM - Getting Started

Thank you for purchasing VAG-COM, which allows you to turn a Windows-based PC into a

sophisticated diagnostic tool for VW/Audi/SEAT/Skoda models from 1990-2007.

Read This First!

Before plugging anything in,

you must install VAG-COM software.

Step #1

Go to our website and click on Download at the top of the screen to download and install

the latest version of VAG-COM: www.Ross-Tech.com

Follow the onscreen

instructions and allow

VAG-COM to install in its

default directory. Ɩ

The VAG-COM Pro-Kit comes with a CD containing our software as well but if possible it is

always a good idea to download the latest version from our website.

Ƙ Step #2

Connect the Serial end of your

Serial Interface or the USB end of

your USB Interface to the correct

port on your PC. If your PC is

further from the vehicle than 6

feet, connect an approved

Extension Cable between the PC

and the Interface. The

appropriate extension is included

in the Pro-Kit and additional ones

are available from our web store.

Getting Started cont.

Step #3 (USB Only) Ɩ

If you are using a Serial Interface then you can

proceed to step #4. If you are using a USB

Interface, a message like this should pop up: Ɩ

Click on the Found New Hardware message and the Found New Hardware Wizard should

start up. If you are prompted with the choice, pick “No, Not This Time” when asked if you

want to connect to the Internet to search for drivers. Select "Install the software

automatically (Recommended)" then click [Next >]

The process should be automated but you may need to click “Continue Anyway” part way

through the process. If you are using Windows 98/ME then you should follow the USB

Driver Installation Instructions that should automatically pop up on your screen.

If, for some reason, you installed the USB Interface without following the above

instructions, and VAG-COM does not work correctly, go into your PC’s Device Manager

while the USB Interface is connected.

In Windows XP, you can find the Device Manager by right-clicking on My Computer. Select

Manage to bring up Computer Management. On the left side of the screen under System

Tools, select Device Manager.

Find the “VAG-COM Compatible USB Interface” and delete it. Check under “Other

Devices”. Then, unplug the USB Interface from your PC, wait 5 seconds and plug it back in.

Proceed with the installation starting on Page 1.

Step #4 Ɩ

Connect the car end of your

Interface to your vehicle’s Diagnostic Port. Ɩ

Ƙ If your vehicle has a 2x2 port (some pre-1996

vehicles), then use the optional 2x2 Adapter between

the Interface and the ports in the car. This is included

in the Pro-Kit.

Turn the vehicle’s ignition switch to the ON position. Make sure the key is turned far

enough that the dash lights are fully illuminated. The engine may either be running or

stopped.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: