Factory_Reset_Procedures - Roland.pdf - INSTRUKCJE - PORADNIKI - wimex

Factory Reset Procedures

Caution: Many of these procedures will erase all memory in the unit. Make sure you have

backed up any data you wish to keep before performing these procedures! If a unit is not listed

here, it does not have an initialization procedure that is user-executable.

Model Procedure

A-30/33/37 Power on while holding WRITE. (Hold for 15 seconds)

A-50/80 While holding the first, third, and fourth buttons under the display, press CHANNEL. Then

press any cursor button

A-70/90/90EX Power on while holding down MANUAL, then press ENTER

A-220

Power on while holding B and MEMORY

A-880

Power on while holding SIGNAL and MEMORY

AD-8

Power on while holding WRITE. Confirm that ÐFÑ flashes in the display, then release

WRITE. Press WRITE again

AP-700

Power on, then press EXIT repeatedly to get ANALYZER/FILTER screen. Cursor to MENU,

press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INITIALIZE, press ENTER. Use

VALUE to select ALL MEMORY, then press ENTER twice

AT-Series

(Make sure disk drive is empty.) Power on while holding ONE TOUCH PROGRAM

AX-1/7

Power on while holding WRITE. (Hold for 30 seconds)

AXIS-1

While holding FUNCTION, press the F#0, C#2, and D#2 keys

Model Procedure

BR-8/532/1180 Press UTILITY. Cursor to ÐInitializeÑ. Press ENTER. Cursor to ÐAllÑ. Press ENTER twice

BR-600

Power on while holding GUITAR, MIC, and LINE. Press ENTER.

BR-864

Power on while holding INPUT SELECT/GUITAR/BASS, MIC, and LINE. Press ENTER

BR-900CD/

1200CD

Press UTILITY. Press CURSOR Right to select ÐInitialize.Ñ Press ENTER. Press CURSOR

Right to select ÐAllÑ. Press ENTER twice

BR-1600CD

Press UTILITY. Cursor to ÐInitializeÑ. Press ENTER. Cursor to ÐAllÑ. Press ENTER twice

Model Procedure

CD-2 Press MENU. Use the DATA dial to select ÐINITIALIZE.Ñ Press ENTER twice.

CDX-1 Press UTILITY. Cursor right to ÐINITÑ. Press ENTER/YES. Use CURSOR buttons to select

desired target to be initilaized, (GLOBAL, FX, MIXER, ALL). Press ENTER/YES twice

CE-20 Power on while holding WRITE. Release WRITE then press WRITE again

CR-80 Power on while holding DEL and REPEAT, then press ENTER

D Model Procedure

D-2 With the unit on, Hold WRITE and press SYSTEM. Press ENTER twice

DB-30 Power on while holding the START/STOP button until ÐFÑ shows in the display

DB-60 Power on while holding the MEMORY button until ÐFÑ shows in the display

DB-88 Power on while holding METRONOME MODE and LOOP MODE. Press WRITE

DB-90 Power on while holding MEMORY

DD-20 Power on while holding WRITE. Release, then press WRITE again

DDR-30 Power on while holding the #1 button

DEP-3/5 Power on while holding MEMORY NO UP (^) and DOWN (v)

DJ-70/70MKII Power on while holding the UP ARROW button to enter test mode. Press A, press C, press

S1. When finished the screen will display IC21 = OK

DR-3 Press EDIT. CURSOR Right to select ÐSYSTEM.Ñ Press ENTER. CURSOR Right to select

<FACTORY RESET>. Press ENTER twice

DR-5 Power on while holding FRET LEFT (<) and RIGHT (>), then press ENTER twice

DR-202 Power on while holding MUTE and ROLL. Press TAP/ENTER. Cursor to ÐYESÑ in the

display. Press TAP/ENTER

DR-550/550MKII Power on while holding -1 and +1, then press START

¨2008 Roland Corporation U.S.

Page 1

(

(

Factory Reset Procedures

DR-660

Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press ENTER twice

DR-670

Power on while holding REC and STOP / CONT. Press ENTER twice

DR-770

Press UTILITY, then use LEFT (<) and RIGHT (>) to select [9] F. RST. Press ENTER twice

DR-880

Press EDIT. Press CURSOR Right to select ÐFactory Reset.Ñ Press ENTER twice

DS-330

Power on while holding REVERB and SPLIT, then press YES

Model Procedure

E-09 Press FUNCTION so it is lit. Use the FAMILY </> buttons to select ÐUtility,Ñ then use the

SELECT </> buttons to select ÐFactory Reset.Ñ Press TEMPO >/YES twice

E-10/20/30 Power on while holding WRITE

E-35 Power on while holding REC/PUNCH IN

E-36 Power on while holding RECORDER

E-56 Power on while holding WRITE

E-66 Power on while holding REC in the DISK RECORDER section

E-68/70/86/96 Power on while holding WRITE

E-300/500 Press UTILITY. Use the buttons under the display that correspond to <<PAGE>> to

select FACTORY PRESET. Press EXECUTE, then press OK. When the screen displays

RESET COMPLETE, turn the unit off, then on

E-600 Press FUNCTION and use the PAGE (<) (>) buttons to select ÐFactory Preset.Ñ Touch the

ÐExecuteÑ icon followed by the ÐOKÑ icon on the display screen. Power off then on

EG-101 Power on while holding WRITE

EM-10 Power on while holding USER PROGRAM/WRITE

EM-15/25 With the unit on, press FUNCTION until ÐRESUMEÑ shows in the display. Then press

TEMPO+

EM-20/30/50/55 Power on while holding USER PROGRAM/WRITE

EM-2000 Performance Sets need to be loaded from disk to restore factory default settings. Insert

the factory ZIP Disk into the drive and power on. Press F5 (Disk), then F1 (Load). Press

PAGE ^ / v to select ÐPRF MEMÑ and press UPPER 1(Execute)

ep-5/7/7MKII While holding REC and PLAY, press STRINGS. Power off and then back on

ep-9 While holding REC and PLAY, press CHOIR. Power off and then back on

ep-75/85 Power on while holding REC

EQ-20 Power on holding LIGHT and SELECT. Release, then press LIGHT and SELECT again

EXR-3/5 Power on while holding USER PROGRAM/WRITE

EXR-40/46OR Power on while holding USER PROGRAM/WRITE

Model Procedure

Fantom With the unit on, press MENU. Press the UP or DOWN cursor buttons to select FACTORY

RESET. Press 8 (EXECUTE) twice

Fantom-G6/7/8 Press MENU. Use the CURSOR Up and Down buttons to select ÐFactory Reset,Ñ then press

F8 [Select] followed by F7 [OK]. Press F7 [OK] when completed.

Fantom-S/S88 Press MENU. Use the CURSOR Up or Down buttons to select ÐUtility,Ñ then press ENTER.

Press 3 (Factory Reset) Press 8 (Execute)

Fantom-Xa Press EXIT. Press MENU. Turn the VALUE dial to select ÐUtilityÑ and then press ENTER.

Press F3. Press F6

Fantom-XR Press MENU. Press CURSOR Down to select ÐUTILITY.Ñ Press ENTER. Press CURSOR

Down to select ÐFACTORY RESET.Ñ Press ENTER twice

Fantom-X6/7/8 Press MENU. Press the CURSOR DOWN button to select ÐUtility.Ñ Press button 3 (Factory

Reset). Press Button 8 (Exec). Cycle the power

FC-100MKII

Power on while holding pedals #1, #2, and #8

FC-200

Power on while holding the #10 pedal, then press the CTL pedal

FG-10/1000

Power on while holding CLEAR and EXIT

FP-2

Power on while holding REVERB until ÐFctÑ shows in the display

FP-4

Power on while holding FUNCTION

¨2008 Roland Corporation U.S.

Page 2

(

Factory Reset Procedures

FP-5

Power on while holding PEDAL CONTROL

FP-7

Power on while holding FUNCTION

FP-8

Press FUNC and release. While holding PIANO, press FUNC again

FR-3

Power on while holding SET and ORCHESTRA.

FR-5/7

Power on while holding MENU/WRITE. Press the DATA/ENTER button

Model Procedure

G-70

Press MENU. Touch UTILITY, then touch FACTORY RESET. Touch EXECUTE

G-600/800

Power on while holding WRITE

G-1000

Performance Sets need to be loaded from disk to restore factory default settings. Insert

the factory ZIP Disk into the drive and power on. Press F5 (Disk), then F1 (Load). Press

PAGE ^ / v to select ÐPRF MEMÑ and press UPPER 1 (Execute)

GI-10

Power on while holding PARAMETER + and -, then press VALUE +

GI-20

With the power off, set the GUITAR /BASS switch to match the instrument you are using.

Power on while holding TUNER(STRING SEL). Press WRITE

GM-70

Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT.

Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA TRANSFER

GP-16

Power on while holding the #6, #7, and #8 buttons. Use the FUNCTION LEFT (<) and

RIGHT (>) buttons to select Ð2.All Factory Preset,Ñ then press WRITE three times

GP-20

Power on while holding WRITE. Release WRITE, (The MEMORY indicator will flash), then

press WRITE again

GP-100

Power on while pressing in the PARAMETER knob, then press WRITE

GR-09

Power on while holding Pedal #2, then press the VALUE + button. Now press EDIT/PLAY

GR-1

Power on while holding WRITE/COPY, then press YES

GR-20

Power on while holding WRITE, then press WRITE again

GR-30

Power on while holding Pedal #2, then press the PATCH+ button to select INI. Press

EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously

GR-33

Press SYSTEM. Press PARAMETER (>) right to select ÐFACTORY RESETÑ. Use VALUE to

select ÐALLÑ. Press WRITE twice

GS-10

Power on while holding the CHANNEL SELECT A and B buttons (within the

PREAMP/SPEAKER section), then press WRITE

GT-3

Power on while holding MOD and SFX. Press WRITE

GT-5

Power on while holding MOD and FEEDBACKER/SLOW GEAR. Press WRITE

GT-6/8/Pro

Power on while holding the PREAMP ON/OFF and (PREAMP)TYPE/VARIATION buttons.

Press WRITE

GT-6B

Power on while holding COMP/LIMITER ON/OFF and TYPE VARIATION. Press WRITE

GT-10/10B

Press SYSTEM. CURSOR right to select ÐFACTORY RESETÑ then press ENTER twice.

GW-7

Press FUNCTION. Press SELECT Left or Right to choose ÐUtility.Ñ Press ENTER twice

GW-8

Press MENU. Use the CURSOR Up and Down buttons to select ÐUtilityÑ then press ENTER.

Use the CURSOR buttons to select ÐFactory ResetÑ then press ENTER twice. Power off and

on.

GX-700

Press TUNER/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons to select FACT

INIT. Cursor to left and dial SYSTEM, then right and dial P#100. Press WRITE, then

TUNER/UTILITY

Model Procedure

HP-130

Power on while holding REC

HP-557

Press GUIDE button until it is NOT lit. Touch PIANO, then touch FUNCTION. Use Page (<)

(>) to select the function page. Touch FACTORY RESET. Touch OK

HPD-10

While holding SHIFT, press EDIT. Press the V button until you see ÐFACTORY RESET.Ñ

Press >, then use the +/- buttons to select ÐALL.Ñ Press V, then press 4/OK

HPD-15

Press SYSTEM and use the PARAMETER (>) to select ÐFACTORY RESET SYSTEM.Ñ Use

the VALUE dial to select ÐALLÑ and press WRITE

Model Procedure

¨2008 Roland Corporation U.S.

Page 3

(

Factory Reset Procedures

JD-800

Press DATA TRANSFER. Use PAGE UP (^) and DOWN (v) to select FACTORY PRESET.

Press YES

JD-990

While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES)

JP-8000

While holding SHIFT, press INIT/UTIL. Press INIT/UTIL repeatedly to select INITIALIZE

WRITE. Use the DOWN/UP buttons to select FACTORY PRESET, then press WRITE

JP-8080

Press EDIT. Press INIT/UTIL (Bank 7) repeatedly to select Factory Reset. Press REC then

press WRITE

JS-30

Power on while holding RECORD located in the SEQUENCER section

JS-5

Press UTILITY. Use CURSOR buttons to select Ð16 SYSTEM FACTORY RESET.Ñ Press

ENTER twice

Juno-D

Press MENU. Press PAGE/CURSOR Right to select ÐFactory ResetÑ. Press ENTER twice

Juno-G

Press MENU. Use ^/v to select UTILITY then press ENTER. Press F3 FACTORY then press

F6 EXECUTE.

Juno-Stage

Press MENU. Use the CURSOR buttons to select ÐUTILITY,Ñ then press ENTER. Use the

CURSOR buttons to select ÐFACTORY RESET,Ñ then press ENTER. Press 7 [EXEC] to

confirm. Power off then back on when finished.

JV-30

Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP (^)

JV-35/50

Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to

select ALL. Press VALUE UP (^)

JV-80/90

Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER

and then press WRITE

JV-880

Press UTILITY, then use the DATA dial to select FACTORY PRESET. Press ENTER twice

JV-1000

Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER,

then press WRITE

JV-1010

Press VALUE to select Performance Mode. While holding VOLUME press VALUE. Use the

CATEGORY/BANK dial to select Piano (LCD will display Fct). Press VALUE twice

JV-1080

Press UTILITY. Cursor down once, then cursor right three times to select FACTORY

PRESET. Press ENTER twice, then press UTILITY

JV-2080

Press UTILITY. Press F6 twice to select MENU 3. Press F1. Then press F6. If necessary,

use the VALUE DIAL to turn Memory Protect OFF and press F6 twice

JW-50

Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS RESET),

then F4 (YES)

JX-1

Power on while holding WRITE and FLUTE

JX-305

Press UTILITY. Use PAGE </> to select Factory Preset and press ENTER. Use PAGE </>

to select ALL and press ENTER twice

Model Procedure

KF-90

Press FUNCTION. Touch [System Setting]. Touch [Facotry Reset]. Touch [Execute

KR-5/7

Press the One Touch Program PIANO button. Touch FUNCTIONS. Touch FACTORY RESET

KR-15/15M

Press the One Touch PIANO button. Touch FUNCTION SETTINGS. Touch FACTORY

RESET. Touch EXECUTE. Touch YES

KR-55

Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds

KR-75

Press UTILITY and use the PAGE <</>> buttons to select ÐFactory Preset.Ñ Press

EXECUTE, then press OK

KR-177

In the Utility menu screen, press PAGE < (left) or PAGE >(right) to select the ÐFACTORY

PRESETÑ page. Press EXECUTE. Press OK

KR-277/375

Press FUNCTION until it is lit. Use BEAT and TEMPO buttons to display ÐFNC41Ñ. Press

TRANSPOSE twice

KR-350

While holding LOAD and SAVE, press WRITE

KR-377

Press FUNCTION until it is lit. Use the PAGE left or PAGE right buttons at the bottom of

the display until ÐFactory ResetÑ appears. Press ÐFACTORY RESETÑ next to the display.

Press EXECUTE at the bottom of the display. Press OK

KR-500

While holding FROM and TO, press WRITE

KR-570

While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer section)

simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY SETUP LOAD in

the window. After loading is complete, power off and then back on

KR-575

Press FUNCTION and use the PAGE left or right buttons to select ÐFactory Preset.Ñ Touch

¨2008 Roland Corporation U.S.

Page 4

(

Factory Reset Procedures

the ÐExecuteÑ icon followed by the ÐOKÑ icon on the display screen. Power off then on

KR-577/977 Press FUNCTION until it is lit. Touch [Factory Reset]. Touch [Execute]. Touch [OK]

KR-650 While holding LOAD and SAVE, press WRITE

KR-770 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer section)

simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY SETUP LOAD in

the window. After loading is complete, power off and then back on

KR-1070 Press UTILITY and use the PAGE <</>> buttons to select ÐFactory Preset.Ñ Press

EXECUTE, then press OK

KR-1077 Press FUNCTION until it is lit. Touch [Factory Reset]. Touch [Execute]. Touch [OK]

KR-3000 While holding FROM and TO, press WRITE

KR-3500/4500 While holding LOAD and SAVE, press WRITE

KR-4700/5000 While holding EDIT, press LOAD and SAVE

KR-5500

While holding LOAD and SAVE, press WRITE

Model Procedure

LVC-1N

Power on while holding ENTER

Model Procedure

M-10/16DX

Power on while holding FINALIZE and ROOM ACOUSTIC

M-660/760

While holding EDIT, press WRITE. Use PARAMETER UP (^) and DOWN (v) to select ALL,

then press WRITE. When completed, press EDIT to return to Play Mode

M-1000

Set the SELECT switch to the OPTICAL Input setting, then power on while holding the

CLOCK SOURCE button

M-BD1/DC1

Power on while holding F3

M-GS64/OC1

Power on while holding F3

M-SE1/VS1

Power on while holding F3

MC-09

Press SETUP. Press INC or DEC until ÐFctÑ shows in the display. Press ENTER, then press

WRITE

MC-303

Power on while holding down SHIFT, then press ENTER

MC-307

With unit on, Press SYSTEM. Press F2 UTIL. Press CURSOR DOWN until ÐFactory ResetÑ

appears. Press F1. Press F4

MC-505

Power on while holding down SHIFT, then press ENTER. Note, this procedure takes

several minutes

MC-808

Press SYSTEM, then hold SHIFT and press keyboard pad 16. CURSOR to ÐFactory RestÑ

and press ENTER twice.

MC-909

With the unit on, press MENU. Use CURSOR to select ÐUtility.Ñ Press ENTER. Press F4

(Factory Reset.) Press F6 (Execute)

ME-5

Power on while holding pedals #1 and #2, then press WRITE immediately

ME-6/6B

Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE

ME-8/8B

Power on while holding PARAMETER LEFT (<) and DOWN (v), then press WRITE/COPY

ME-10

Power on while holding the BANK DOWN (v) pedal, then press WRITE

ME-20/20B

In Manual Mode, hold EDIT/EXIT and press PEDAL 2. Press WRITE twice.

ME-30

Power on while holding PARAMETER RIGHT (>) and VALUE DOWN (-), then press

WRITE/COPY

ME-33

Power on while holding the AMP/EFFECT right button and EZ TONE. Release, then press

WRITE and wait for ÐWRITEÑ to stop flashing in the LCD. Power off, then on again

ME-50/50B

Power on while holding WRITE and BANK Left <, then Press WRITE Twice

ME-X

Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE

MICRO BR

Power on while holding UTILITY. Press YES twice.

MK-80

While holding WRITE, press EDIT. While holding the LEFT (<) and RIGHT (>) cursor

buttons, press UP (^)

MKS-50

Poly Mode: Power on while holding NUMBER 4 and 8.

Mono Mode: Power on while holding NUMBER 3 and 7

MMP-2

With the unit on press SYSTEM until it is orange. Press PAGE until ÐINITIALIZEÑ appears.

¨2008 Roland Corporation U.S.

Page 5

Factory_Reset_Procedures - Roland.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: