Yamaha PSR630-730 manual.pdf

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO

NOT connect this product to any power supply or adapter other than

one described in the manual, on the name plate, or specifically recom-

mended by Yamaha.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

battery is approximately five years. When replacement becomes nec-

essary, contact a qualified service representative to perform the re-

placement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery

being charged.

When installing batteries, do not mix batteries with new, or with batter-

ies of a different type. Batteries MUST be installed correctly. Mis-

matches or incorrect installation may result in overheating and battery

case rupture.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and head-

phones or speaker/s, may be capable of producing sound levels that

could cause permanent hearing loss. DO NOT operate for long periods

of time at a high volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should consult

an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly and

as regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some

reason its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your

dealer before requesting service.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Model

Serial No.

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP

FCC INFORMATION (U.S.A.)

IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in

this manual, meets FCC requirements. Modifications not expressly ap-

proved by Yamaha may void your authority, granted by the FCC, to use

the product.

the instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Compliance with

FCC regulations does not guarantee that interference will not occur in

all installations. If this product is found to be the source of interference,

which can be determined by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the following measures:

IMPORTANT :

When connecting this product to accessories and/or another product use

only high quality shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions. Failure to follow in-

structions could void your FCC authorization to use this product in the

USA.

• Relocate either this product or the device that is being affected by the

interference.

• Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

• In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

co-axial type cable.

NOTE:

This product has been tested and found to comply with the requirements

listed in FCC Regulations, Part 15 for Class “B” digital devices. Compli-

ance with these requirements provides a reasonable level of assurance

that your use of this product in a residential environment will not result in

harmful interference with other electronic devices. This equipment gener-

ates/uses radio frequencies and, if not installed and used according to

If these corrective measures do not produce satisfactory results, please

contact the local retailer authorized to distribute this type of product. If

you can not locate the appropriate retailer, please contact Yamaha

Corporation of America, Electronic Service Division, 6600

Orangethorpe Ave, Buena Park, CA90620

• This applies only to products distributed by Yamaha Corporation of America.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,

short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts

or modify them in any way. The instrument contains no user-serviceable

parts. If it should appear to be malfunctioning, discontinue use immedi-

ately and have it inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place containers on it containing liquids which might

spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is

a sudden loss of sound during use of the instrument, or if any unusual

smells or smoke should appear to be caused by it, immediately turn off

the power switch, disconnect the adaptor plug from the outlet, and

have the instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-6 or an equivalent recommended by

Yamaha) only. Using the wrong adaptor can result in damage to the

instrument or overheating.

• Before cleaning the instrument, always remove the electric plug from

the outlet. Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or

radiators, and do not excessively bend or otherwise damage the cord,

place heavy objects on it, or place it in a position where anyone could

walk on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, al-

ways hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly cause

overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Always make sure all batteries are inserted in conformity with the +/–

polarity markings. Failure to do so might result in overheating, fire, or

battery fluid leakage.

• Always replace all batteries at the same time. Do not use new batteries

together with old ones. Also, do not mix battery types, such as alkaline

batteries with manganese batteries, or batteries from different makers,

or different types of batteries from the same maker, since this can

cause overheating, fire, or battery fluid leakage.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• If the instrument is not to be in use for a long time, remove the batteries

from it, in order to prevent possible fluid leakage from the battery.

• Keep batteries away from children.

• Before connecting the instrument to other electronic components, turn

off the power for all components. Before turning the power on or off for

all components, set all volume levels to minimum.

• Do not expose the instrument to excessive dust or vibrations, or ex-

treme cold or heat (such as in direct sunlight, near a heater, or in a car

during the day) to prevent the possibility of panel disfiguration or dam-

age to the internal components.

• Do not use the instrument near other electrical products such as televi-

sions, radios, or speakers, since this might cause interference which can

affect proper operation of the other products.

• Do not place the instrument in an unstable position where it might acci-

dentally fall over.

• Before moving the instrument, remove all connected adaptor and other

cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint

thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Also, do not place vinyl or plastic objects on the instrument, since this

might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument,

and do not use excessive force on the buttons, switches or connectors.

• Use only the stand specified for the instrument. When attaching the

stand, use the provided screws only. Failure to do so could cause dam-

age to the internal components or result in the instrument falling over.

• Do not operate the instrument for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

SAVING USER DATA

• Always save data to a floppy disk frequently, in order to help prevent

the loss of important data due to a malfunction or user operating error.

Yamaha cannot be held responsible for damage caused by improper use or

modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Make sure to discard used batteries according to local regulations.

(4)

Congratulations!

You are the proud owner of a fine electronic keyboard. The Yamaha PSR-730/630 PortaTone

combines the most advanced tone generation technology with state-of-the-art digital electronics

and features to give you stunning sound quality with maximum musical enjoyment. A large graphic

display and easy-to-use interface also greatly enhance the operability of this advanced instrument.

In order to make the most of your PortaTone’s features and extensive performance potential, we

urge you to read the manual thoroughly while trying out the various features described. Keep the

manual in a safe place for later reference.

l The LCD displays as illustrated in this owner’s manual are for instructional purposes only, and may appear somewhat

different from those on your instrument. The displays from the PSR-730 are used for the instructions and descriptions

in this manual.

Important Features

PSR-730

Touch-sensitive 61-key keyboard for a wide

range of dynamic musical expression (page 115).

The Groove & Dynamics function lets you

individualize your arrangement of any style of

music (page 35).

A variety of voices, 215 panel voices (200

panel voices for PSR-630), 12 drum kits and 480

XG voices, with the maximum polyphony of 64

voices (32 voices for PSR-630).

P i a n o

Large multi-function LCD display panel

makes it easy to select and edit parameters.

The functional layout of the track buttons

below the panel display makes operation easy.

Voice set feature automaticaly selects the

appropriate voice parameter settings for the panel

voices (page 116).

Registration Memory saves your favorite

panel settings for instant recall when needed

(page 57).

Advanced auto-accompaniment technol-

ogy gives you 100 fully-orchestrated accompani-

ment “styles” to back up what you play on the

keyboard (page 22).

Minus-one and Repeat functions are ideal

for learning new songs and polishing your key-

board technique (page 79).

Virtual Arranger feature lets you add chord

progressions to any of the auto-accompaniment

styles for more musical, refined accompaniment

(page 29).

Digital effects (reverb, chorus, DSP and

harmony) add depth and ambiance to your sound

(page 42).

One Touch Setting feature automatically

selects appropriate voice, effect, and other set-

tings for the selected accompaniment style — all

you have to do is select a style and play (page 40).

PSR-730

The Multi Effect function lets you combine

two digital effects (page 48).

PSR-730

Multi Pads record and play short rhythmic

and melodic sequences that can be used to add

impact and variety to your performances (page

106).

With the Digital Equalizer you can fine

tune the sound of your performance on five differ-

ent frequency bands (page 51).

User Song recording feature makes it easy

to record and playback four melody tracks with an

accompaniment track (page 83).

The floppy disk drive plays XG disks and

lets you easily manage User Song, User Style,

User Pad and Registration data (page 64).

A total of sixteen tracks can be recorded

with the Multi recording function, including key-

board, harmony and accompaniment (page 88).

A range of MIDI functions for expanded

musical enjoyment (XG format compatible), and a

TO HOST terminal for easy connection to a per-

sonal computer (page 121)

Create original accompaniment styles with

the User Style feature (you can also establish

your own rules for changing pitch based on chord

changes (page 98).

MIDI templates for easy MIDI settings

(page 129).

GM System Level 1

XG is a new MIDI format created by Yamaha which

significantly improves and expands upon the “GM Sys-

tem Level 1” standard by providing a greater variety of

high-quality voices plus considerably enhanced effect

operation while being fully compatible with GM.

PSR-730/630 supports the XG format.

“GM System Level 1” is an addition to the MIDI

standard which ensures that any GM-compatible music

data can be accurately played by any GM-compatible

tone generator, regardless of manufacturer. The GM

mark is affixed to all software and hardware products that

support the “GM System Level 1”.

PSR-730/630 supports GM System Level 1.

Packing List

Please check that these items are packed with your PSR-730/630.

• Music Stand (page 7)

• PSR-730/630

• Sample Disk

• Owner’s manual

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: