BR100.PDF

Philips Semiconductors

Product Specification

Silicon Bi-directional Trigger Device

BR100/03 LLD

GENERAL DESCRIPTION

QUICK REFERENCE DATA

Silicon bidirectional trigger device in a

SYMBOL PARAMETER

MIN. MAX. UNIT

glass envelope suitable for surface

mounting. The device is intended for

V (BO)

Breakover voltage

use in triac and thyristor trigger

V O

Output voltage

circuits.

I FRM

Repetitive peak forward current

OUTLINE - SOD80

SYMBOL

LIMITING VALUES

Limiting values in accordance with the Absolute Maximum System (IEC 134).

SYMBOL

PARAMETER

CONDITIONS

MIN.

MAX.

UNIT

I FRM

Repetitive peak forward

s, T tp

50˚C; f = 60 Hz

current

P tot

Total power dissipation

T tp = 50˚C

150

T stg

Storage temperature

-55

125

˚C

T j

Operating junction

100

˚C

temperature

THERMAL RESISTANCES

SYMBOL

PARAMETER

CONDITIONS

MIN. TYP. MAX. UNIT

R th j-tp

Thermal resistance junction to PCB mounted

330

K/W

tie point

CHARACTERISTICS

T a = 25 ˚C unless otherwise stated.

SYMBOL

PARAMETER

CONDITIONS

MIN. TYP. MAX. UNIT

V (BO)

Breakover voltage

I = I (BO)

|V (BO)+ | - |V (BO)- | Breakover voltage symmetry I = I (BO) , see fig: 1

3.5

V O

Output voltage

R L = 20

; Circuit of fig: 2

I (BO)

Breakover current

V = V (BO)

dV (BO) /dT

Temperature coefficient of

0.1

%/K

V (BO)

t r

Risetime

I p = 0.5 A; Circuit of fig: 2

1.5

February 1996

Rev 1.000

Philips Semiconductors

Product Specification

Silicon Bi-directional Trigger Device

BR100/03 LLD

VBO

D.U.T.

10k

500k

I(BO)I

V(BO)III

100nF

V(BO)I

10R

230 V, RMS, 50Hz

I(BO)III

Set load resistance

measuring output voltage

to 20 Ohms when

50R

when measuring risetime

Fig.1. Current-voltage characteristics

Fig.2. Test circuit for output voltage and risetime.

MECHANICAL DATA

Dimensions in mm

0 1.5

0 1.5 max

1.3

0.3 min

3.7

3.3

Fig.3. SOD80

February 1996

Rev 1.000

Adjust for Ip=0.5A

Philips Semiconductors

Product Specification

Silicon Bi-directional Trigger Device

BR100/03 LLD

DEFINITIONS

Data sheet status

Objective specification This data sheet contains target or goal specifications for product development.

Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.

Product specification

This data sheet contains final product specifications.

Limiting values

Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one

or more of the limiting values may cause permanent damage to the device. These are stress ratings only and

operation of the device at these or at any other conditions above those given in the Characteristics sections of

this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.

LIFE SUPPORT APPLICATIONS

These products are not designed for use in life support appliances, devices or systems where malfunction of these

products can be reasonably expected to result in personal injury. Philips customers using or selling these products

for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting

from such improper use or sale.

February 1996

Rev 1.000

Philips Electronics N.V. 1996

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the

The information presented in this document does not form part of any quotation or contract, it is believed to be

accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any

consequence of its use. Publication thereof does not convey nor imply any license under patent or other

industrial or intellectual property rights.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: