(381 KB) Pobierz
721492432 UNPDF
DINAN E63/64 6 Series
Dinan Signature SerieS
4 Year / 50,000 Mile Warranty
Contact a Dinan Representative or visit dinancars.com
for information on the most extensive line of 6 Series
performance products available, all backed by the only
guarantee that matches the new car warranty coverage
up to 4 years or 50,000 miles.
“Performance without the compromise to drivabil-
ity or the reinement expected by a BMW owner.
This is a Dinan Hallmark.”
European Car
Dinan S-645 and 650
Includes: Stage 2 Engine Software; High Flow Air Intake; Free Flow Exhaust; Front Strut Tower Brace; Dinan Pedal Pads; Dinan
Deck-Lid Badge and Serial Numbered Dinan S Plaque.
Dinan S-645: 349 hp @ 6500 rpm / 343 lb-ft torque @ 4000 rpm
Dinan S-650: 385 hp @ 6500 rpm / 374 lb-ft torque @ 4000 rpm
Dinan S2-645 and 650 (Manual or SMG Transmissions)
Includes: Stage 3 Engine Software; High Flow Air Intake; Free Flow Exhaust; High Flow Throttle Body; Front Strut Tower Brace;
Rear Shock Tower Brace; Stage 2 Suspension; Lightweight Flywheel, 3.45 Diferential; Dinan Pedal Pads; Dinan Deck-Lid Badge
and Serial Numbered Dinan S2 Plaque.
Dinan S2- 645: 354 hp @ 6500 rpm / 346 lb-ft torque @ 4000 rpm
Dinan S2- 650: 390 hp @ 6500 rpm / 374 lb-ft torque @ 4000 rpm
Dinan S1-645 and 650
Includes: Stage 3 Engine Software; High Flow Air Intake; Free Flow Exhaust; High Flow Throttle Body; Front Strut Tower
Brace; Rear Shock Tower Brace; Stage 1 Suspension; Dinan Pedal Pads; Dinan Deck-Lid Badge and Serial Numbered Dinan S1
Dinan S1- 645: 354 hp @ 6500 rpm / 346 lb-ft torque @ 4000 rpm
Dinan S1- 650: 390 hp @ 6500 rpm / 374 lb-ft torque @ 4000 rpm
Components available separately.
engine Performance
High Flow Throttle Body 2 badge points
Dinan carefully bores the stock throttle body, increasing the internal diameter for
greater air-low area. The larger bore further improves air-low for increased power
output and more immediate throttle response. Matching Stage 3 Engine Software is
recommended for optimum performance and drivability.
645: +5 hp @ 6500 rpm / +4 lb-ft torque @ 5500 rpm
650: +4 hp @ 6500 rpm / +3 lb-ft torque @ 6100 rpm
Performance Engine Software 2 badge points
Dinan Performance Engine Software extracts additional power as well as speeding
up throttle response. The software safely raises the rev-limiter by 250 rpm, enabling
you to carry more road speed in each gear as well as optimize shift points for maxi-
mum acceleration. The top speed governor is removed, enabling the cars to reach
their natural top speed. Additional stages of Dinan Engine Software are available,
calibrated for use with speciic combinations of the other Dinan engine products in
order to ensure optimum performance, reliability and drivability.
645: +8 hp @ 6600 rpm / +6 lb-ft torque @ 6600 rpm
650: +8 hp @ 6500 rpm / +6 lb-ft torque @ 6500 rpm
*Dyno results when tested in conjunction with a K&N free low air ilter.
SuSPenSion anD chaSSiS
Carbon Fiber Front Strut
Tower Brace 2 badge points
Dinan’s strong yet incredibly lightweight carbon iber front
strut tower brace efectively enhances chassis rigidity for improved
handling and sharper steering response. Forged aluminum ends
ensure maximum strength and bolt directly to the stock locations
for a clean and simple installation. May be installed with any Dinan
suspension system or the stock components.
High Flow Air Intake System 3 badge points
The performance intake systems take full advantage of the ram-air efect by add-
ing a second inlet that force-feeds more cool, oxygen rich air to the engines. The
systems feature an enhanced replacement air box and cover that increase total
volume as well as accommodate the additional air inlet and larger high low ilter
element. The air box and cover are manufactured from injection-molded plastic,
providing the most efective insulation against power robbing under-hood heat.
The sealed design pressurizes the intake system for maximum power gains and
further reduction of intake air temperatures. Air from the added inlet is chan-
neled through a carbon iber duct, ofering a tasteful high performance look
under the hood. The 650 system also includes a replacement air mass meter housing and adaptor. Matching Stage 2 Engine
Software is highly recommended for optimum performance and drivability.
645: +17 hp @ 6500 rpm / +14 lb-ft torque @ 6500 rpm
650: +18 hp @ 6500 rpm / +15 lb-ft torque @ 6500 rpm
Carbon Fiber Rear Shock Tower Brace - Coupe 1 badge point
The matching carbon iber shock tower brace provides increased chassis rigidity at the rear of the cars, further improving the
6 Series’ handling capabilities. Made from the same tubular carbon iber as the front brace with forged aluminum ends for
maximum strength.
Free Flow Exhaust 3 badge points
Reduced weight, 100% 304-stainless steel construction, a great sporty exhaust note and
superior low make for the best performing 6 Series mulers on the market. Larger polished
stainless steel tips give the cars a tasteful high performance look unlike any other. Careful
attention to detail ensures a perfect it using the factory hangers.
645: +6 hp @ 6600 rpm / +5 lb-ft torque @ 6600 rpm
650: +6 hp @ 6500 rpm / +5 lb-ft torque @ 6500 rpm
19" Lightweight Forged Wheels 5 badge points – set of four
Dinan 19x9” front and 19X10” rear wheels accommodate the largest tires possible, 285/35-19 in
the rear and 265/35-19s up front, dramatically increasing overall grip as well as reducing under
steer for razor sharp turn-in. At just 20 lbs. each, they are the lightest 19” wheels to be found,
improving handling, braking and even ride quality, improving handling, braking and even ride
721492432.015.png 721492432.016.png 721492432.001.png 721492432.002.png 721492432.003.png
Suspension Systems 5 badge points
Dinan suspension systems ofer the grip that enthusiasts demand while
maintaining a comfortable, well-dampened ride. Comprised of fully
matched proprietary springs designed to work in conjunction with the
stock struts/shocks, Dinan’s unique front and rear Roll Control Systems
and camber plates, the systems provide comprehensive, pre-tuned sus-
pension solutions that take the guesswork out of superior handling from
the 6 Series without compromising civilized ride quality.
Stage 1 Suspension: Performance Spring Set, Matching Bump Stops.
Stage 2 Suspension: Adds front and rear Roll Control Systems to Stage 1
components for cars equipped with “Dynamic Drive”,
providing greater control over body roll while retaining the stock antiroll bars and self adjusting feature. The
rear Roll Control System also provides adjustability for a closer to neutral balance.
Stage 3 Suspension: Adds Front Camber Plates to the Stage 2 components, inducing 1⁄2 degree additional negative camber for
greater grip in the turns, reducing understeer and providing razor sharp turn-in. Camber plates may be
installed with the Stage 1 System for cars that are not equipped with the “Dynamic Drive” self adjusting
antiroll bars.
Lightweight Flywheel (Manual and SMG Transmissions)
Lightened dual-mass lywheel improves driveline eiciency for faster acceleration and more
immediate throttle response. The lywheel has been relieved of 7 lbs. for an 18% reduction in
weight and a 40% reduction in rotational inertia. SMG equipped cars receive the added beneit
of a reduction in shifting time, providing smoother gear changes in both the manual and “au-
tomatic” modes.
2 badge points
3.45 Diferential (Manual and SMG Transmissions)
Lowers the stock 2.93 inal drive ratio for a substantial 17.7% increase in torque delivered
to the wheels. Provides faster acceleration in every gear with only a minor increase in
engine speed at cruise.
2 badge points
Mono Ball Lower Control Arm Bearings 1 badge point
Mono Ball lower control arm bearings address the excessive delection associated with
the stock bushings that negatively afect steering response as well as exacerbating the
efects of brake shimmy, which can be particularly noticeable when larger brakes are
installed. Ride quality is also improved as the mono ball bearings are actually more
compliant. Featuring racing quality, spherical bearings in precision machined alu-
minum housings, the bearings are substantially larger than competing products for
greater load handling capabilities and durability. A special Telon lining ensures quiet
operation. The Dinan mono ball kit provides the beneits of greatly reduced delection
without the annoying clanking that is common among lesser quality products.
Dinan Pedal Pads 1 badge point
Stylish spun aluminum pedal pads with anti-slip rubber inserts feature the Dinan logo, add-
ing a great high performance look to the interior of your 6 Series. Available for manual and
automatic applications.
Dinan Performance Brakes by Brembo
3 badge points
Signature Floor Mats
Signature loor-mat sets featuring an embroidered Dinan logo
are available for the 6 Series in your choice of carpet and logo
Dinan and Brembo, the world leader in high performance brake systems, ofer ultimate
stopping power while maintaining the quiet operation, pedal feel and wear indicator
systems that are appropriate for street applications. For the 6 Series, the front brakes
feature impressive 6-piston aluminum calipers with 380mm two-piece rotors (stock ro-
tors: 348mm). The rear brakes feature 4-piston calipers as well with 345mm two-piece
rotors. The systems also include Goodridge stainless steel brake lines. Kits are available
for all four wheels or the front only in your choice of black or red calipers and slotted or
drilled rotors.
The Dinan Badge
The Dinan badge cannot be purchased but rather is provided at no charge
when your Dinan performance selections total 10 points, making your Dinan
enhanced BMW as exclusive as it is exciting to drive.
721492432.004.png 721492432.005.png 721492432.006.png 721492432.007.png 721492432.008.png 721492432.009.png 721492432.010.png 721492432.011.png
Dinan Engineering, North America’s BMW Tuner
Founded in 1979, Dinan is well established as North America’s
premiere BMW tuner. Dinan develops and manufactures the
most comprehensive line of BMW high performance products
and systems for the street as well as the track, most recently
powering Daytona Prototypes to victory in the Grand Ameri-
can Road Racing Series.
covered for up to 4 years or 50,000 miles. BMW automobiles
can be performance-tuned without the associated concern
of negatively afecting the new car warranty coverage.
As a serious BMW Tuner, Dinan's objective is to ofer complete
performance solutions for the entire range of BMW models.
From faster acceleration to improved cornering capabilites
and stopping power, Dinan takes the guess-work out of cre-
ating the high performance BMW of the enthusiasts dreams
with complete, balanced performance systems. A choice of
several complete Signature Series programs are available for
each BMW model in order to meet a broad range of perfor-
mance requirements and budgets. In addition to stunning
performance, you will also enjoy the exclusivity of owning a
serial numbered Dinan Signature BMW, registered with both
BMW and Dinan.
Dinan’s products are distributed through a substantial net-
work of Authorized Dinan BMW dealerships throughout the
US and Canada. Dinan’s industry leading warranty program,
quality products and solid engineering have helped to make
Dinan a household word among BMW driving enthusiasts.
Road tests conducted by major automotive enthusiast pub-
lications over the last 29 years place Dinan enhanced BMWs
on a performance level with some of the most exotic sports
cars in the world. At the same time, Dinan BMWs are widely
renowned for being civilized and reliable, providing a high
performance BMW-like driving experience without equal.
Dinan ofers the means to make your BMW driving experi-
ence even more exciting, without sacriicing warranty cover-
age or the civility you expect from a BMW automobile. Your
Authorized Dinan BMW dealership is fully prepared to help
you begin driving the high performance BMW of your dreams
Dinan’s comprehensive warranty program, introduced in
1998 with the cooperation of BMW of North America, pro-
vides BMW owners with matching coverage to that ofered by
BMW’s new car warranty, ensuring that Dinan performance
enhancements and the BMW they have been installed in are
865 Jarvis Dr. • Morgan Hill, CA 95037 • 800-341-5480 • www.dinancars.com
Some products not legal for sale or use in California. Contact Dinan directly or visit dinancars.com for the current emissions status of each product.
Zgłoś jeśli naruszono regulamin