(399 KB) Pobierz
721492428 UNPDF
DINAN E60 5 Series
Dinan Signature SerieS
4 Year / 50,000 Mile Warranty
Contact a Dinan Representative or visit dinancars.com
for information on the most extensive line of 5 Series
performance products available, all backed by the only
guarantee that matches the new car warranty coverage
up to 4 years or 50,000 miles.
“Performance without the compromise to drivabil-
ity or the reinement expected by a BMW owner.
This is a Dinan Hallmark.”
European Car
Dinan S-545 and 550
Includes: Stage 2 Engine Software; High Flow Air Intake; Free Flow Exhaust; Front Strut Tower Brace; Dinan Pedal Pads; Dinan
Deck-Lid Badge and Serial Numbered Dinan S Plaque.
Dinan S-545: 349 hp @ 6500 rpm / 343 lb-ft torque @ 4000 rpm
Dinan S-550: 385 hp @ 6500 rpm / 374 lb-ft torque @ 4000 rpm
Dinan S2-545 and 550
(Manual and SMG Transmissions)
Includes: Stage 3 Engine Software; High Flow Air Intake; Free
Flow Exhaust; High Flow Throttle Body; Front Strut Tower Brace;
Rear Shock Tower Brace; Stage 2 Suspension; Lightweight
Flywheel, 3.45 Diferential; Dinan Pedal Pads; Dinan Deck-Lid
Badge and Serial Numbered Dinan S2 Plaque.
Dinan S2- 545: 354 hp @ 6500 rpm
346 lb-ft torque @ 4000 rpm
Dinan S2- 550: 390 hp @ 6500 rpm
374 lb-ft torque @ 4000 rpm
Dinan S1-545 and 550
Includes: Stage 3 Engine Software; High Flow Air Intake; Free Flow Exhaust; High Flow Throttle Body; Front Strut Tower
Brace; Rear Shock Tower Brace; Stage 1 Suspension; Dinan Pedal Pads; Dinan Deck-Lid Badge and Serial Numbered Dinan S1
Dinan S1- 545: 354 hp @ 6500 rpm / 346 lb-ft torque @ 4000 rpm
Dinan S1- 550: 390 hp @ 6500 rpm / 374 lb-ft torque @ 4000 rpm
Components available separately.
engine Performance
Free Flow Exhaust 3 badge points
Reduced weight, 100% 304-stainless steel construction, a great sporty exhaust note and
superior low make for the best performing 5 Series mulers on the market. Larger polished
stainless steel tips give the cars a tasteful high performance look unlike any other. Careful
attention to detail ensures a perfect it using the factory hangers.
545: +6 hp @ 6600 rpm / +5 lb-ft torque @ 6600 rpm
550: +6 hp @ 6500 rpm / +5 lb-ft torque @ 6500 rpm
High Flow Throttle Body 2 badge points
Dinan carefully bores the stock throttle body, increasing the internal diameter for greater
air-low area. The larger bore further improves air-low for increased power output and
more immediate throttle response. Matching Stage 3 Engine Software is recommended for
optimum performance and drivability.
545: +5 hp @ 6500 rpm / +4 lb-ft torque @ 5500 rpm
550: +4 hp @ 6500 rpm / +3 lb-ft torque @ 6100 rpm
Performance Engine Software 2 badge points
Dinan Performance Engine Software extracts additional power as well as speeding up throt-
tle response. The software safely raises the rev-limiter by 250 rpm, enabling you to carry more
road speed in each gear as well as optimize shift points for maximum acceleration. The top
speed governor is removed, enabling the cars to reach their natural top speed. Additional
stages of Dinan Engine Software are available, calibrated for use with speciic combinations
of the other Dinan engine products in order to ensure optimum performance, reliability and
545: +8 hp @ 6600 rpm / +6 lb-ft torque @ 6600 rpm
550: +8 hp @ 6500 rpm / +6 lb-ft torque @ 6500 rpm
*Dyno results when tested in conjunction with a K&N free low air ilter.
High Flow Air Intake System 3 badge points
The performance intake systems take full advantage of the ram-air efect by adding a second inlet that force-feeds more cool,
oxygen rich air to the engines. The systems feature an enhanced replacement air box and cover that increase total volume as
well as accommodate the additional air inlet and larger high low ilter element.
The air box and cover are manufactured from injection-molded plastic, provid-
ing the most efective insulation against power robbing under-hood heat. The
sealed design pressurizes the intake system for maximum power gains and fur-
ther reduction of intake air temperatures. Air from the added inlet is channeled
through a carbon iber duct, ofering a tasteful high performance look under
the hood. The 550 system also includes a replacement air mass meter housing
and adaptor. Matching Stage 2 Engine Software is highly recommended for
optimum performance and drivability.
545: +17 hp @ 6500 rpm / +14 lb-ft torque @ 6500 rpm
550: +18 hp @ 6500 rpm / +15 lb-ft torque @ 6500 rpm
SuSPenSion anD chaSSiS
Carbon Fiber Front Strut Tower
Brace 2 badge points
Dinan’s strong yet incredibly lightweight carbon iber front
strut tower brace efectively enhances chassis rigidity for improved
handling and sharper steering response. Forged aluminum ends
ensure maximum strength and bolt directly to the stock locations
for a clean and simple installation. May be installed with any Dinan
suspension system or the stock components.
Carbon Fiber Rear Shock Tower Brace 1 badge point
The matching carbon iber shock tower brace provides increased chassis rigidity at the rear of the
cars, further improving the 5 Series’ handling capabilities. Made from the same tubular carbon iber
as the front brace with forged aluminum ends for maximum strength.
19" Lightweight Forged Wheels 5 badge points – set of four
Dinan 19x9” front and 19X10” rear wheels accommodate the largest tires possible, 275/30-19 in the
rear and 245/35-19s up front, dramatically increasing overall grip as well as reducing under steer
for razor sharp turn-in. At just 20 lbs each, they are the lightest 19” wheels to be found, improving
handling, braking and even ride quality.
High Flow Air Mass Meter Housing – Under Development 2 badge points
Dinan’s High Flow Air Mass Meter housing features a larger internal diameter, further improving the delivery of air to the en-
gine for maximum output. The Air Mass Meter is available for both the 545 and 550, for use in conjunction with the High Flow
Intake Systems. Matching Stage 4 engine software ensures optimum performance and drivability. Available Spring 2008.
721492428.024.png 721492428.025.png 721492428.001.png 721492428.002.png 721492428.003.png 721492428.004.png
Suspension Systems 5 badge points
Dinan suspension systems ofer the grip that enthusiasts demand
while maintaining a comfortable, well-dampened ride. Comprised of
fully matched proprietary springs, Koni adjustable shocks/struts, Dinan’s
unique front and rear Roll Control Systems and camber plates, the sys-
tems provide comprehensive, pre-tuned suspension solutions that take
the guesswork out of superior handling from the 5 Series without com-
promising civilized ride quality.
Stage 1 Suspension: Performance Spring Set, Adjustable Koni Struts/Shocks,
Matching Bump Stops
Stage 2 Suspension: Adds front and rear Roll Control Systems to Stage 1
components for cars equipped with “Dynamic Drive”,
providing greater control over body roll while retaining the stock antiroll bars and self adjusting feature. The
rear Roll Control System also provides adjustability for a closer to neutral balance.
Stage 3 Suspension: Adds Front Camber Plates to the Stage 2 components, inducing ½ degree additional negative camber for greater
grip in the turns, reducing understeer and providing razor sharp turn-in. Camber plates may be installed with
the Stage 1 System for cars that are not equipped with the “Dynamic Drive” self adjusting antiroll bars.
Lightweight Flywheel (Manual and SMG Transmissions)
Lightened dual-mass lywheel improves driveline eiciency for faster acceleration and more
immediate throttle response. The lywheel has been relieved of 7 lbs. for an 18% reduction in
weight and a 40% reduction in rotational inertia. SMG equipped cars receive the added beneit
of a reduction in shifting time, providing smoother gear changes in both the manual and “au-
tomatic” modes.
2 badge points
3.45 Diferential (Manual and SMG Transmissions)
Lowers the stock 2.93 inal drive ratio for a substantial 17.7% increase in torque delivered
to the wheels. Provides faster acceleration in every gear with only a minor increase in
engine speed at cruise.
2 badge points
Mono Ball Lower Control Arm Bearings 1 badge point
Mono Ball lower control arm bearings address the excessive delection associated with
the stock bushings that negatively afect steering response as well as exacerbating the
efects of brake shimmy, which can be particularly noticeable when larger brakes are
installed. Ride quality is also improved as the mono ball bearings are actually more
compliant. Featuring racing quality, spherical bearings in precision machined alu-
minum housings, the bearings are substantially larger than competing products for
greater load handling capabilities and durability. A special Telon lining ensures quiet
operation. The Dinan mono ball kit provides the beneits of greatly reduced delection
without the annoying clanking that is common among lesser quality products.
Dinan Pedal Pads 1 badge point
Stylish spun aluminum pedal pads with anti-slip rubber inserts feature the Dinan logo, add-
ing a great high performance look to the interior of your 5 Series. Available for manual and
automatic applications.
Dinan Performance Brakes by Brembo
3 badge points
Signature Floor Mats
Signature loor-mat sets featuring an embroidered Dinan logo
are available for the 5 Series in your choice of carpet and logo
Dinan and Brembo, the world leader in high performance brake systems, ofer ultimate
stopping power while maintaining the quiet operation, pedal feel and wear indicator
systems that are appropriate for street applications. For the 5 Series, the front brakes
feature impressive 4-piston aluminum calipers with 380mm two-piece rotors (stock ro-
tors: 348mm). The rear brakes feature 4-piston calipers as well with 345mm two-piece
rotors (stock rotors: 345mm). The systems also include Goodridge stainless steel brake
lines. Kits are available for all four wheels or the front only in your choice of black or red
calipers and slotted or drilled rotors.
The Dinan Badge
The Dinan badge cannot be purchased but rather is provided at no charge
when your Dinan performance selections total 10 points, making your Dinan
enhanced BMW as exclusive as it is exciting to drive.
721492428.005.png 721492428.006.png 721492428.007.png 721492428.008.png 721492428.009.png 721492428.010.png 721492428.011.png 721492428.012.png 721492428.013.png
DINAN Powered Win at the
2007 Miami Grand Prix!
first in BmW performance.
first across the inish line.
865 Jarvis Dr. • Morgan Hill, CA 95037 • 800-341-5480 • www.dinancars.com
Some products not legal for sale or use in California. Contact Dinan directly or visit dinancars.com for the current emissions status of each product.
721492428.015.png 721492428.016.png
721492428.017.png 721492428.018.png
721492428.020.png 721492428.021.png
Zgłoś jeśli naruszono regulamin