sloth-assembly.pdf
(
167 KB
)
Pobierz
Maned Sloth
Thank you for downloading this paper craft model of the Maned Sloth. By match-
ing the names and numbered parts in the instructions, you and your family can com-
plete a paper craft model of this rare and precious animal.
Assembly instructions: Seven A4-sized sheets.
Paper craft: Four A4-sized sheets with 11 parts in all
These instructions apply only to the "Maned Sloth."
These Paper Craft parts are easier to work with when printed out on strong,
thick paper (like postcard stock).
*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).
1
To begin
Basic working method and markings
Tools and materials needed
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) -
dictionary or other heavy book ( to press the papers flat).
Solid lines
Fold along these lines. The printed
surface should be on the outside of
the folded shape.
Items of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the type
of printer used.
Broken lines
Fold along these lines. The printed
surface should be on the inside of
the folded shape.
Dotted line
2
How to assemble
Cut along these lines.
*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
One - point Advice
Do not fold or cut the parts
marked .
*Cut carefully with cutting blade, Exacto-knife or
scissors.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
Cut out parts marked with an as-
terisk(*).
*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper
to wrinkle.
*Before beginning assembly, test adhesive amounts
on extra paper.
Red dots are the reference positions
for gluing surfaces.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more diffi-
cult once parts are assembled.
- 2 -
3
Assembly
Please refer to the "Basic working method
and markings" symbol chart on Page 2 to
assemble each part.
Indication of Working Methods
Fold or Curve
Glue
Assembly of Maned Sloth (
Parent
)
1.
Assembly of Head
1
Reference photo
Reference photo
2.
Assembly of Chest
Reference photo
2
2.
Assembly of Belly
Reference photo
3
- 3 -
3
Assembly
Please refer to the "Basic working method
and markings" symbol chart on Page 2 to
assemble each part.
Indication of Working Methods
Fold or Curve
Glue
Assembly of Maned Sloth (
Parent
)
4.
Assembly of Right Arm
Assemble the left arm in the same way.
5
Reference photo
5.
Assembly of Body
6
Reference photo
Reference photo
- 4 -
3
Assembly
Please refer to the "Basic working method
and markings" symbol chart on Page 2 to
assemble each part.
Indication of Working Methods
Fold or Curve
Glue
Assembly of Maned Sloth (
Young
)
1.
Assembly of Head
7
2.
Assembly of Body
8
3.
Completion
Reference photo
- 5 -
Plik z chomika:
gaszkowski
Inne pliki z tego folderu:
sloth-c-e.pdf
(259 KB)
sloth-assembly.pdf
(167 KB)
sloth-w-e.pdf
(118 KB)
Inne foldery tego chomika:
3DPaper
baldeagle
Baranek
black rhinoceros
blue wale
Zgłoś jeśli
naruszono regulamin