CDX-596.PDF

(2981 KB) Pobierz
CDX596本文1
CDX-596
CDX-596
SERVICE MANUAL
SERVICE MANUAL
TEXT/
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that all service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact
the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-
lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
-
OUTPUT LEVEL +
4
0
0
CONTENTS
TO SERVICE PERSONNEL ....................................... 1-2
REAR PANELS .............................................................. 3
SPECIFICATIONS .......................................................... 4
INTERNAL VIEW ........................................................... 4
DISASSEMBLY PROCEDURES ................................ 5,6
STANDARD OPERATION CHART ............................ 6,7
TEST MODE ................................................................ 7,8
ERROR MESSAGE ................................................... 9,10
DISPLAY DATA ........................................................... 11
IC DATA .................................................................. 12-16
BLOCK DIAGRAM ....................................................... 17
PRINTED CIRCUIT BOARD ................................... 18-21
IC BLOCK .................................................................... 22
WAVEFORMS .............................................................. 23
SCHEMATIC DIAGRAM .............................................. 24
PARTS LIST ............................................................ 25-33
REMOTE CONTROL TRANSMITTER ......................... 34
100708
COMPACT DISC PLAYER
SERVICE MANUAL
178968972.036.png 178968972.037.png 178968972.038.png 178968972.039.png 178968972.001.png 178968972.002.png 178968972.003.png 178968972.004.png 178968972.005.png 178968972.006.png 178968972.007.png 178968972.008.png 178968972.009.png 178968972.010.png 178968972.011.png 178968972.012.png 178968972.013.png 178968972.014.png 178968972.015.png 178968972.016.png 178968972.017.png 178968972.018.png
CDX-596
TO SERVICE PERSONNEL
1. Critical Components Information.
Components having special characteristics are marked
and must be replaced with parts having specifications equal
to those originally installed.
Meter impedance should be equivalent to 1500 ohm shunted
by 0.15µF.
Leakage current must not exceed 0.5mA.
Be sure to test for leakage with the AC plug in both
polarities.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs a laser. Therefore, be sure to carefully
follow the instructions below when servicing .
1. Laser Diode Properties
2. When checking the laser diode emission, keep your
eyes more than 30 cm away from the objective lens.
Material
: GaAlAs
Wavelength
: 780 nm
Emission Duration : Continuous
Laser Output
: max. 44.6 µW*
* This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the Optical Pick-up Block.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic
and/or plastic (where applicable) components may also contain traces of chemicals found by the
California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects
or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH
FOR ANY REASON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale
solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your
hands before handling food.
1
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
178968972.019.png
CDX-596
G, B models
CLASS 1 LASER PRODUCT
G, B models
English
THIS PRINTING (SEE POSITION SHOWN IN THE ILLUSTRATION) INFORMS THE USER THAT THE APPARATUS
CONTAINS A LASER COMPONENT.
THIS LABEL (SEE POSITION SHOWN IN THE ILLUSTRATION) WARNS THAT ANY FURTHER PROCEDURE WILL
BRING THE USER INTO EXPOSURE WITH THE LASER BEAM.
CAUTION : USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Swedish
DENNA MÄRKNING (SE FIGUR) UPPLYSER OM ATT DET I APPARATEN INGÅR EN LASERKOMPONENT AV TYP
KLASS 1.
VARNINGSMÄRKNING (SE FIGUR) FÖR STRÅLNING. INGREPP I APPARATEN BÖR ENDAST FÖRETAGAS AV
FACKMAN MED KÅNNEDOM OM LASER. APPARATEN INNEHÄLLER EN LASERKOMPONENT SOM AVGER
STRÅLNING ÖVERSTIGANDE GRÄNSEN FÖR LASERKLASS 1.
VARNING : OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD: BETRAKTA EJ STRÅLEN.
Danish
DETTE MÆRKAT ER ANBRAGT SOM VIST I ILLUSTRATIONEN FOR AT ADVARE BRUGEREN OM AT APPARATET
INDEHOLDER EN LASERKOMPONENT.
DETTE MÆRKAT OM LASEREN ER ANBRAGT PÅ APPARATET SOM EN OPLYSNING OM AT APPARATET
INDEHOLDER ET LASERKOMPONENT.
ADVARSEL : INDGREB BOR KUN FORETAGES AF EN FAGMAND DA DER ER RISIKO FOR RADIOAKTIV
STRÅLING.
ADVARSEL : USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSAETTELSE FOR STRÅLING.
Finnish
VARO! :
AVATTAESSA OLET ALTTIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
2
178968972.020.png 178968972.021.png 178968972.022.png 178968972.023.png
CDX-596
REAR PANELS
A model
G, B models
3
178968972.024.png 178968972.025.png 178968972.026.png 178968972.027.png 178968972.028.png 178968972.029.png
CDX-596
SPECIFICATIONS
Output Level
1kHz, 0dB
DIMENSION
2.0 ± 0.5Vrms
Signal to Noise Ratio (EIAJ)
115dB
Dynamic Range
100dB
Harmonic Distortion+Noise (1kHz)
0.0025%
Frequency Response
2Hz — 20kHz
±0.5dB
Power Requirements
B, G models
230V AC 50Hz
A model
240V AC 50Hz
Power Consumption
10W
Dimensions (W x H x D)
435 x 96 x 277mm
(17-1/8" x 3-3/4" x 10-7/8")
Weight
3.7kg (7 lbs 11 oz)
Finish
CDX-596BL
Black color
435(17-1/8")
CDX-596GD
Gold color
CDX-596TI
Titanium color
Accessories
Pin plug cord
Remote control transmitter
(Dry-cell : x 2: Size “AA”, R06)
Unit : mm (inch)
*Specifications are subject to change without notice.
A .............. Australian model
B .................... British model
G ............... European model
INTERNAL VIEW
1 MAIN P.C.B. (3)
2 MAIN P.C.B. (1)
3 MAIN P.C.B. (4)
4 CD MECHANISM UNIT
5 MAIN P.C.B. (2)
6 MAIN P.C.B. (5)
5
6
4
178968972.030.png 178968972.031.png 178968972.032.png 178968972.033.png 178968972.034.png 178968972.035.png
 
Zgłoś jeśli naruszono regulamin