SaabR4ClassAAISUG.PDF

(901 KB) Pobierz
7000_109_130_AIS.book
Saab TransponderTech
OPERATOR’S MANUAL
R4 AIS Class A
Transponder System
218790915.005.png 218790915.006.png 218790915.007.png 218790915.008.png
Copyright
The entire contents of this manual and its appendices, including any future updates and
modifications, shall remain the property of Saab TransponderTech AB at all times. The
contents must not, whether in its original form or modified, be wholly or partly copied or
reproduced, nor used for any other purpose than the subject of this manual.
Disclaimer
While reasonable care has been exercised in the preparation of this manual, Saab
TransponderTech AB shall incur no liability whatsoever based on the contents or lack of
contents in the manual.
Software
This manual reflects the capabilities of R4 Display software version 5.0.x and R4 AIS
Transponder software 5.0.x.
Operators Manual Part Number and Revision
Part number 7000 108-131, revision H.
This manual replaces earlier manuals from part number 7000 108-131 revision P9D on-
wards.
Safety Instructions
Note the following compass safe distances:
Equipment
Standard magnetic
compass
Steering magnetic
compass
R4 Display
0.6 m
0.3 m
R4 Transponder
0.2 m
0.1 m
How To Contact Us
For Information on New Products and Dealers:
Please visit our home page www.transpondertech.se
For Installation, Service and Technical Support:
Please contact your R4 AIS Class A Transponder System dealer.
218790915.001.png
Table of Contents
Product Description ................................................. 5
System Overview
5
Main Features
6
Getting Started ........................................................ 7
Front Panel Keys 7
How to Operate the R4 Display 8
Views and Function Keys 8
Change Settings 8
Alarm and Alert Pop-ups 9
Turning On and Off the R4 Display 9
System Modes 10
Status Bar 12
Status Icons 12
View Remote Ship Information 13
View Plot of Targets 14
Enter and Read Voyage Related Information 15
Fast Setting of Navigational Status 15
Handling Safety Related Messages (SRM) and Text Messages 16
Read Received Messages
16
Send SRMs
17
Send Text Messages
17
Alarm and Status Lists
18
Visual Settings
19
Reference .............................................................. 21
Status LEDs
21
R4 Transponder LEDs
21
Icon Description
22
Message Symbols
22
AIS Status Symbols
22
Navigational Status Symbols (Own Vessel Icons)
22
Miscellaneous Symbols
22
Target Symbols (Target List and Plot)
22
Adjusting Settings
23
Alarm and Alert Pop-ups
24
Changing System Mode
25
Navigate Mode
27
Overview
27
3
218790915.002.png
Target List
28
Extended Info
29
Plot
30
Own Ship Data
32
Plan Voyage Mode
33
Overview
33
AIS Voyage
34
Alarms & Msgs Mode
35
Overview
35
Alarm List
37
Status List
38
AIS Messages
38
Received Messages
39
Sent Messages
40
Send SRM
40
Send Text Message
42
Long Range Messages
43
Config Mode
45
Overview
45
Time Config
47
Display Config
48
Visual Config
48
Sound Config
49
AIS Config
49
Ship Static
50
GNSS Antennas
51
VHF Radio Config
52
AIS Display
53
Tran. Password
53
Long Range
54
Regional Areas
55
Alarm Config
57
Units Config
57
Port Rate Config
59
System Info
61
Restore Sys. Conf.
63
Appendix ................................................................ 65
Alarm Messages
65
AIS Alarms Description
65
Indication Messages
67
Long Range Definitions
67
Glossary ................................................................. 69
Index ...................................................................... 71
4
218790915.003.png
System Overview
Product Description
System Overview
The R4 AIS Class A Transponder System consists of an R4 AIS Transponder and an R4
Display. The R4 Transponder consists of a radio transceiver unit, a GPS receiver and a
controller unit. The transceiver consist of one transmitter and three independent VHF re-
ceivers, two tunable TDMA receivers and one DSC receiver. The transmitter alternates its
transmissions between the two operating TDMA channels and can also be used to reply a
DSC interrogation (ITU-R M.825-3, Annex 1). The controller unit creates and schedules
data packets (containing dynamic, static and voyage related data) for transmission based
on the IMO performance standard for AIS.
The R4 Transponder shall be connected to the ship’s sensors as required by the installa-
tion guidelines published by IALA. The R4 Transponder can interface external navigation
and presentation systems that support required IEC 61162-1 sentences as set out in the
Installation Manual. The R4 Transponder is prepared for connection to Long Range sys-
tems like Inmarsat C.
The R4 Display provides a graphical user-friendly interface to the system. Via the display
it is possible to plot the location of other ships, aids to navigation and search and rescue
vessels. Information about other vessel can be listed sorted by range and optionally fil-
tered showing only vessels within a specific sector. The display can also be used to send
and receive messages, perform configuration as well as supervise the systems status.
5
218790915.004.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin