CZ-3Dmanual-8730019-reader.pdf

CZ-3D

Deep Search, 4-Tone, Target I.D. Metal Detector

M a x i m i z e d f o r fi n d i n g o l d e r e r a c o i n s

OPERATING MANUAL

F I S H E R R E S E A R C H L A B O R A T O R Y

a t o l d e r s i t e s !

CONTENTS

About Your Detector ................................................................ pg. 3

Condensed Operating Instructions ........................................ pg. 4

Factory Preset “Turn-On-And-Go” Marks .............................. pg. 4

Setting Up .................................................................................. pg. 5

Hipmounting.............................................................................. pg. 7

Control Panel ............................................................................ pg. 7

Turn-On Procedure ................................................................... pg. 9

Ground Balancing .................................................................... pg. 9

Pushbutton Method .................................................................. pg. 10

“Bobbing” The Search Coil Method ....................................... pg. 10

Search Modes........................................................................... pg. 12

Search Modes: Auto Tune ....................................................... pg. 13

Search Modes: Target ID ......................................................... pg. 13

Searching .................................................................................. pg. 18

Pinpointing: Pushbutton Pinpoint Mode.................................. pg. 20

Pinpointing: Target ID and Autotune Modes.......................... pg. 21

Depth Reading.......................................................................... pg. 24

Target Recovery ....................................................................... pg. 25

Recovery Tools.......................................................................... pg. 26

False Signals.............................................................................. pg. 26

Maintenance ............................................................................ pg. 27

Treasure Hunters’ Code Of Ethics............................................ pg. 28

Battery Replacement ............................................................... pg. 29

Speciications ........................................................................... pg. 30

ABOUT YOUR DETECTOR

Your CZ-3D is an extremely advanced and sophisticated

instrument. It is maximized for a very speciic function - inding

& properly identifying older era coins at older sites. Simply

select the "enhance mode" with the utilization of the "salt/

enhance" switch to ind more rare coins!

The CZ-3D was designed to ind more good metals such as

brass, bronze, copper, silver, and certain gold: reporting it

as a high tone. In addition, a fourth tone has been added to

distinguish between the midtone heard on round & square

"pull tabs" and foil - this enhances your ability to recover gold

jewelry.

With this detector, performance and ID can be further

enhanced by a slower coil sweep speed, more so than previous

CZ models, especially in trashy areas.

Read this instruction manual thoroughly, practice often and

you will be ready for some exciting treasure hunting. Drop us

a line if you have any questions, comments or good inds to tell

us about. In the meantime...

Happy Hunting!

Fisher Research Laboratory

CONDENSED OPERATING INSTRUCTIONS

FACTORY PRE-SET “TURN-ON-AND-GO” MARKS

Your CZ-3D is fairly simple to operate, especially when compared

to other target ID machines. Even so, we strongly recommend that

you read this entire manual. You’ll be able to tune your CZ-3D to

your speciic needs and conditions. A good understanding what

to do and why will lead you to more inds.

If you can’t wait any longer, and you’re an experienced detector

user, here’s some quick instructions to get you going:

1. Set all the controls to the red numbered

“Turn-On-And-Go” marks:

GROUND = 5

DISC = 4

SENSITIVITY = 3

MODE = ENHANCE

VOLUME = 5

This puts you in a “coins-only” mode and you’re

ready to start searching. Keep in mind that the

GROUND setting of 5 is probably not the optimum

setting for the ground you’re searching and that’s

why the sensitivity level is set low—to reduce false

signals caused by ground mineralization.

2. If you’re using headphones, adjust the volume

controls for a comfortable volume when the coil is

passed over a large shallow object.

3 . Walk slowly, overlap your sweeps and keep the

search coil moving. Remember you are in a “motion”

search mode and the coil must be moving at least

slightly to detect a target.

4. When you get a good, repeatable signal, pinpoint

the target by placing the coil on the ground away

from the target, pushing and holding the pinpoint

button and then bringing the coil back over the

target.

5. Once you’ve pinpointed the target, note the

approximate depth reading on the meter, then

identify it by releasing the pinpoint button and

moving the coil side to side in short strokes over

the target. The meter needle will lock onto the

appropriate target classiication.

6. Happy Hunting!

SETTING UP

Drop-in battery compartments

and cable connector at rear of

housing(not shown)

Adjustable

non-metallic

lower stem

8-inch Spider

search coil

Removable control

housing (belt loop on

underside of housing)

Center

section

Foam hand grip

Padded arm rest

Nylon wing nut

(replacable

Duro-Neoprene

bushings, not

shown)

Upper

lock nut

Lower

lock nut

Seven foot

search coil

cable

Upper stem

Built-in detector stand

Figure 1. FISHER CZ-3D

The CZ-3D comes to you just about ready to use. Take a look at the

diagram above and familiarize yourself with the parts of the CZ-3D

before proceeding.

1. Unpack your new CZ-3D carefully. Save the carton

and inserts for future storage or shipment.

2. Take a look inside the locknut on the upper stem.

Note the clear plastic locking pad on the left hand

side and loosen the lock nut by rotating it fully

counterclockwise.

3. Slip the lower stem into the center section.

4. Adjust the stem length (using the guide pin & stem

lock nut) and the coil angle (using the nylon wing

nut) so the search coil rests lat on the ground about

6 inches in front of, and slightly to the right of your

right foot, (to the left of your left foot for left handers).

Your arm should be straight and relaxed, with the

grip held loosely.

REMEMBER: The longer the shaft, the more you will

have to bend your elbow and the sooner your arm

will get tired. The CZ-3D is balanced for comfortable

searching in a tight semicircle around the front of the

operator.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: