Programowanie kluczykow ENG.pdf

APPLICATIONS MANUAL

KEY FOB PROGRAMMING

CONTENTS

PAGE

CITROEN

FORD

NISSAN

1.1

1.3

1.6

1.7

PEUGEOT

RENAULT

LAND ROVER

MITSUBISHI

PORSCHE

1.10

1.12

1.13

1.12

1.13

VW/AUDI/SEAT/SKODA

JAGUAR

1.14

HONDA

1.15

ROVER

1.17

HYUNDAI

1.17

1.18

ISUZU

MAZDA

1.19

SUZUKI

1.19

CHRYSLER / JEEP

1.20

FIAT/ALFA/LANCIA

1.25

HYUNDAI

1.27

SUBARU

1.28

TOYOTA

1.29

VOLVO

1.30

Version 1.5 05/04

KEY FOB PROGRAMMING

CITROEN

XSARA—XANTIA—SYNERGIE– EVASION

CENTRAL DOOR LOCK (1 BUTTON PLIP KEY)

Procedure

1. Ensure all doors are unlocked using the key.

2. Press and hold plip key button until LED stops flashing.

3. After releasing button, LED will light constantly.

4. Press the Plip Button once, and LED will extinguish.

5. Open the door and hold the Plip key near the Ignition switch, and

press the plip button one time.

6. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.

7. After 5 seconds, Plip should now operate.

CENTRAL DOOR LOCK with DEADLOCKING (2 BUTTON PLIP KEY)

Procedure

1. Ensure all doors are unlocked using the key.

2. Press and HOLD the large plip key button while the LED flashes con-

tinuously for 20 seconds. After 20 seconds press the small deadlock button

once while still holding the large button.

3. The LED will stop flashing.

4. Release the large button and the LED will light constantly.

5. Press the large button one time, and the LED will go out.

6. Open the door and hold the Plip key near the Ignition switch, and

press the large plip button one time.

7. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.

8. After 5 seconds, Plip should now operate.

1.1

KEY FOB PROGRAMMING

BERLINGO—98 >

Procedure

1. Turn the Ignition switch to accessory position using the key, without

the remote plip attached.

2. Hold the Plip key towards the receiver at the front of the vehicle.

3. Press the large plip button, then the small plip button on the remote.

4. Repeat for second Plip key if required.

5. Turn ignition OFF.

6. After 5 seconds, Plip should now operate.

SAXO 99 >

Procedure

1. Unlock the vehicle using Key.

2. Press the LOCK button 2 times within 20 seconds of unlocking the ve-

hicle.

XSARA PICASSO

Procedure

1. Turn Ignition ON.

2. Press and HOLD the LOCK button for 5 seconds.

3. Turn Ignition OFF.

4. After 5 seconds test Plip key.

DISPATCH

Procedure

1. Turn Ignition ON, and wait for LED to go out.(If fitted)

2. Press the LOCK or UNLOCK button with 20 seconds.

3. Press the LOCK or UNLOCK on other PLIPS within 10 seconds.

4. LED should light for 1 second.

5. Check PLIPS for operation.

1.2

KEY FOB PROGRAMMING

FORD

Fiesta 96, Puma (Infrared 2 Button)

Procedure

1. Turn Ignition switch to Position I and back to 0 as soon as the PATS LED

in the clock lights (The system is now ready for programming, to a maxi-

mum time limit of 30 seconds)

2. Remove Key from Ignition, hold the FOB towards the Interior Light, and

press and hold the Single Arrow. Wait until the light on the Key flashes,

then press the Double Arrow 3 times., release the Single Button

3. Both LEDs (Key & Clock) should flash to acknowledge programming is

successful

4. To exit learn Mode, turn Ignition to II and then 0

5. A Maximum of 4 Remotes are possible

Mondeo 93> Mondeo 96> (Infrared 2 Button)

Procedure

1. Unlock Vehicle, and turn ignition to position 1.

2. Wait until the PATS LED illuminates (app 10 seconds)

3. Switch Ignition to 0 – within 5 seconds – LED will remain on

4. Point the Remote at one of the front Receivers

5. Press a button and keep pressed – within 20 seconds of step 3

6. When the LED on the Key lights press the other button 3-5 times

7. Release both buttons while still aiming at the receiver

8. If successful, both LED’s will flash 5 times

9. Repeat 5—9 for additional transmitters (within 30 seconds)

10 .When completed, Turn Ignition to II then 0 to store the Keys

Mondeo 98½> Scorpio 95> (Radio 3 Button):

Procedure

1. Turn Ignition 4 times from 0 to I, ending at position I. A tone should

sound.

2. Press the Remote Unlock button – another tone should sound.

3. Additional Remotes can be added by repeating Step 2, within ten sec-

onds of each remote.

4. To exit turn Ignition to 0 – another audible sound should be made.

1.3

KEY FOB PROGRAMMING

Fiesta 96> & Escort 98> (Radio 3 Button)

Procedure

1. Insert Key and turn to II, then Turn Key from II to I and back to II four

times within 3 seconds

2. The PATS LED should light. Turn Key to Position 0.

3. Press the Unlock button and keep it pressed until the PATS LED flashes

4 times.

4. Add additional fobs the same way. Turn to II and back to 0 to end.

Focus (Radio 3 Button)

Procedure

1. Switch Ignition On/Off (II/0) 4 times within 6 seconds until a sound is

made.

2. Press any button on Remote until a sound is made.

3. To program additional Remotes, repeat after 2 seconds after the sound.

4. Turn Ignition On/Off to exit.

5. A maximum of 4 remotes can be programmed.

Mondeo 96> Scorpio > 98 (Radio 2 Button)

Procedure

1. Turn Ignition to II, then turn ignition from II to I and back 4 times within 3

seconds.

2. The PATS LED on dash should light.

3. Turn Ignition to 0. Then press Unlock button and keep it pressed until the

PATS LED flashes 4 times (new fob first, then old)

4. Turn Ignition to II, then back to 0 to end.

1.4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: