JAF_DCT3_Manual_by_Paki.pdf

dct3_manual

Top Previous Next

www.odeon.cn

sales@odeon.cn

DCT- 3 Flashing Manual

How to install a Wintesla Flashfile:

1. Double click on the icon of the Flashfile

2. Then the installation of the Flashfiles starts.

3. Click “Install”, after this the program ask you where to put the files in. The destination

folder should always be: “c:\wintesla”. Then press the “OK” Button.

4. After this the program starts to copy the files (It will take some minutes)

5. After copying the files you should get this Message:

Press the “OK” button. Now the Flashfiles are successfully installed.

How to Flash a DCT-3 Phone:

1. Connect your Phone to the box, and start the J.A.F software:

(Double Click on this Symbol on the Desktop)

2. Select the DCT-3 Tab in the J.A.F Software and Press the “Info” Button

After this in the status Box should be a new message like this one:

In this window you can see the current Firmware of the Phone and the IMEI and the

Security Code. If there is no Security code displayed, is the code 12345.

3. Before you can flash the Phone you must select the right flashfiles. The MCU is the

file where the whole software is saved. The PPM is only the language file. So click

“Flash MCU” then a new Window appear. Select the MCU file of the phone and then

press “Open”

4. After pressing OK a second windows appear for the PPM file. Select the Language

File you like and then press also the “Open” button.

5. Now the files for flashing are selected. Just Press the “Flash” Button to start flashing.

If you want to flash the Phone Manual (recommend for dead Phones) tick the

“Manual Flash” box.

Important : Never disconnect a Phone during the flashing procedure. And wait until

there is the Message: Done!

After this the phone is up to date.

How to Unlock a DCT-3 Phone:

1. Connect the Phone to the Box

2. Select “Init Simlock” then Press the “Unlock” Button.

If you want to lock the Phone to only one Network tick the “Lock to Network” Button and

enter the Operator Code and then press Unlock.

DCT-3 Flashing Manual Page 6/9