CLO_3DMarvelous_Seams_PL.pdf

(804 KB) Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
10.
Seams
10.1 Sew
In CLO 3D, there are two different kinds of sewing tool, segment sewing and free sewin
g. Segment Sewing tool is used to sew two segments together and Free Sewing tool is t
o sew seam lines designated by clicking starting and ending points.
Segment Sewing
Objective
To sew segment to segment.
●
Location
Pattern -> Seam Lines -> Segment Sewing
Operation
To sew segment to segment,
1. Click on the first line segment.
2. Move the cursor over the second segment then dotted lines connected to the end p
oints of each segment, as well as directional notches, appears.
221
 
222 | Seams
In general, dotted lines should not be crossed and notches
should be in the same relative direction to ensure correct sewing. An exceptio
n
is sewing pleats (covered in Tutorial No. 3).
Note: The dot lines and notches indicate the sewing
direction.
Free Sewing
Objective
To sew segment defined by points
●
Location
Pattern -> Seam Lines -> Free Sewing
Operation
To sew point to point,
1. Choose Free Sewing tool in the main menu or tool bar.
2. Click on a point anywhere along a pattern line to begin sewing. The line will be hig
878019773.011.png 878019773.012.png 878019773.013.png 878019773.001.png 878019773.002.png 878019773.003.png 878019773.004.png
 
Edit Seams | 223
hlighted as you move the cursor.
3. Click on a point along the line to indicate an end point.
4. Repeat on the corresponding pattern line. Check the dotted lines and notches corre
ct.
10.2 Edit Seams
Edit Seam
Objective
To edit seam line
●
To reverse seam line
●
To delete seam line
●
Location
Pattern -> Seam Lines -> Edit Seam
Operation
To edit seam line
1. Select Edit Seam in the main tool bar or main menu.
2. Click and drag the middle of a seam to move it along the line.
878019773.005.png 878019773.006.png 878019773.007.png
224 | Seams
3. You can also extend or shorten segments by clicking and dragging the end points
To reverse seam line
1. Select Edit Seam tool and click on the seam line that you wish to reverse.
2. Click on the Delete Seam line tab in the right-click activatged popup menu or main
menu ( Pattern-> Seam Lines -> Reverse Seam Line )
Tod delete seam line
1. Select Edit Seam tool and click on the seam line that you wish to reverse.
2. Click on the Delete Seam line tab in the right-click activatged popup menu or main
menu ( Pattern-> Seam Lines -> # Reverse Seam Line )
878019773.008.png 878019773.009.png
Make Folded Lines | 225
10.3 Make Folded Lines
Patterns can be folded along internal lines and seam lines between two patterns. With t
his to, you can make creases for iron lines, tucks, and pleats.
Seam Lines Property
Objective
to fold pattern at a seam line
●
to strengthen a fold.
●
Location
Property Eidtor Window -> Seam Lines -> Fold Angle
Property Eidtor Window -> Seam Lines -> Fold Strength
Operation
To fold angle at a seam line,
1. Select Edit Seam Lines tool at the main tool bar or main menu and click on the inter
nal line that you wish to fold.
2. Go to Property Editor-> Seam Lines -> Fold Angle.
3. You can adjust the angle from 0° to 360°. The default value is 180°, representing a
flat surface. Increase the value to make the pattern fold inwards. Decrease the value
to make the pattern fold outwards.
4. To strengthen the fold, go to Property Editor-> Seam Lines -> Fold Strength Increase
the Fold Strength value.
 
878019773.010.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin