Grizzly700-Service-manual-401-485(1).pdf

(1692 KB) Pobierz
Ghostscript wrapper for C:\Documents and Settings\bpl-ksz\Moje dokumenty\Prywatne\Quad\Grizzly700-Service-manual.pdf
REAR KNUCKLES AND STABILIZER
CHAS
EBS01024
CHECKING THE REAR KNUCKLES
1. Check:
• rear knuckle
Damage/pitting Replace.
2. Check:
• rear wheel bearing 1
Bearing allow play in the wheel hub or the
wheel turns roughly Replace.
a. Clean the outside of the rear knuckle.
b. Remove the circlip 2 .
c. Drive out the bearing.
2
WARNING
1
_
Eye protection is recommended when
using striking tools.
d. Apply lithium-soap-based grease to the
outer side of the bearing.
e. Install the new bearing.
CAUTION:
_
Do not strike the center race or balls of the
bearing. Should be made only with the
outer race.
f. Install the new circlip.
EBS01025
CHECKING THE STABILIZER
1. Check:
• stabilizer
Bends/cracks/damage Replace.
8 - 54
719898338.041.png 719898338.042.png 719898338.043.png 719898338.044.png 719898338.001.png
 
719898338.002.png
 
719898338.003.png 719898338.004.png 719898338.005.png 719898338.006.png 719898338.007.png 719898338.008.png 719898338.009.png
REAR ARMS AND REAR SHOCK ABSORBER
ASSEMBLIES
CHAS
EBS00476
REAR ARMS AND REAR SHOCK ABSORBER ASSEMBLIES
45 Nm (4.5 m • kg, 32 ft • Ib)
2
45 Nm (4.5 m • kg, 32 ft • Ib)
4
2
LS
7
4
7
6
4
10
LS
7
1
10
7
5
7 Nm (0.7 m • kg, 5.1 ft • Ib)
9
10
3
9
45 Nm (4.5 m • kg, 32 ft • Ib)
2
10
8
2
45 Nm (4.5 m • kg, 32 ft • Ib)
Order
Job/Part
Q’ty
Remarks
Removing the rear arms and rear
shock absorber assemblies
Remove the parts in the order listed.
The following procedure applies to both
of the rear arms and rear shock absorber
assemblies.
Rear knuckle/stabilizer
Refer to “REAR KNUCKLES AND STA-
BILIZER”.
1
Rear brake hose guide
2
2
Nut/washer/bolt
2/1/2
3
Rear shock absorber assembly
1
4
Nut/bolt
2/2
Refer to “INSTALLING THE REAR
ARMS AND REAR SHOCK ABSORBER
ASSEMBLIES”.
5
Rear upper arm
1
6s t c v r
1
7
Nut/bolt
2/2
8
Rear lower arm
1
9s t c v r
2
8 - 55
719898338.010.png 719898338.011.png 719898338.012.png 719898338.013.png
REAR ARMS AND REAR SHOCK ABSORBER
ASSEMBLIES
CHAS
45 Nm (4.5 m • kg, 32 ft • Ib)
2
45 Nm (4.5 m • kg, 32 ft • Ib)
4
2
LS
7
4
7
6
4
10
LS
7
1
10
7
5
7 Nm (0.7 m • kg, 5.1 ft • Ib)
9
10
3
9
45 Nm (4.5 m • kg, 32 ft • Ib)
2
10
8
2
45 Nm (4.5 m • kg, 32 ft • Ib)
Order
Job/Part
Q’ty
Remarks
10
Bushing
4 Refer to “INSTALLING THE REAR
ARMS AND REAR SHOCK ABSORBER
ASSEMBLIES”.
For installation, reverse the removal pro-
cedure.
8 - 56
719898338.014.png 719898338.015.png 719898338.016.png
REAR ARMS AND REAR SHOCK ABSORBER
ASSEMBLIES
CHAS
CHECKING THE REAR ARMS
1. Check:
• rear arms
Bends/damage Replace.
2. Check:
• bushings
Wear/damage Replace.
EBS00478
CHECKING THE REAR SHOCK ABSORBER
ASSEMBLIES
1. Check:
• shock absorber assemblies
Oil leaks Replace the shock absorber
assembly.
• spring
Fatigue Replace the shock absorber
assemblies.
Move the spring up and down.
8 - 57
719898338.017.png 719898338.018.png 719898338.019.png
REAR ARMS AND REAR SHOCK ABSORBER
ASSEMBLIES
CHAS
67
EBS01027
INSTALLING THE REAR ARMS AND REAR
SHOCK ABSORBER ASSEMBLIES
1. Install:
• rear arms
• rear shock absorber assemblies
5
1
34
a. Install the rear upper arm 1 and rear lower
arm 2 .
NOTE:
_
• Lubricate the bolts 3 with lithium-soap-
based grease.
• Be sure to position the bolts 3 so that the
bolt head faces outward.
• Temporarily tighten the nuts 4 .
8
67
b. Install the rear shock absorber assembly 5
and bolts 6 .
8
2
Nut 7
45 Nm (4.5 m · kg, 32 ft · lb)
c. Install the rear knuckle.
Nut 8
45 Nm (4.5 m · kg, 32 ft · lb)
d. Tighten the nuts 4 .
Nut 4
45 Nm (4.5 m · kg, 32 ft · lb)
8 - 58
719898338.020.png 719898338.021.png 719898338.022.png
 
719898338.023.png 719898338.024.png 719898338.025.png 719898338.026.png 719898338.027.png 719898338.028.png 719898338.029.png 719898338.030.png 719898338.031.png 719898338.032.png 719898338.033.png 719898338.034.png 719898338.035.png 719898338.036.png 719898338.037.png 719898338.038.png 719898338.039.png 719898338.040.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin