Datasheet_DTS-Monaco_EN.pdf

DTS-Monaco

The Universal Tool for ECU Communication

Data Sheet

Diagnostics, Bus Analysis and

ECU Programming with ODX and FIBEX

The basis of most vehicle functions is realized with electronic

control units (ECUs). The quality of the entire vehicle thus depends

on the reliability of the individual ECU as well as its interaction

within the ECU network. Thanks to tool-aided validation, which

takes place as early as ECU engineering, communication and

function errors can be detected and rectified at a very early stage.

A universal and manufacturer-independent tool can be used

for a large number of application cases in your company. And

because it is based on industry-relevant standards, you are

really going to save money!

Areas of Implementation and Applications

Whenever diagnostics, measuring, flash programming and

onboard analysis have to be available individually or simultane-

ously – DTS-Monaco is the perfect tool, for example for:

Engineering of ECU software

ECU test/validation

ECU integration

System test

Preparation of test sequences

in Manufacturing and Service

Analysis of returns

Quality Assurance

Automatic

As a validation tool, DTS-Monaco also makes parameterizations

possible that the ECU is not specified for. This makes both best-

case and worst-case tests possible: at communication, data and

function level! DTS-Monaco takes care of verifying the validity

of ECU responses so that you are informed immediately of, for

example, incorrect ECU timing.

Versatile

DTS-Monaco enables manual testing and thus complete control

of the test sequence. And you can of course test automatically.

This ensures the reproducibility of tests already executed as well

as enabling endurance tests. To make sure you can also docu-

ment your tests, all communication information is saved on the

hard disk for later use.

Advantages of DTS-Monaco

Application-oriented

DTS-Monaco represents the communication information

described in ODX files exactly as you require it. This means there

are specialist interfaces for various application cases, e. g. for

communication and diagnostic engineering, function validation,

flash programming and OBD tests.

An Overview of Features

Covers all cases of application: diagnostics, flash

programming, measuring, analysis of onboard data,

parameterization, residual bus simulation, OBD

Configurable

Just a few clicks of the mouse and you have exactly the inter-

face configuration you need. You yourself determine the infor-

mation necessary for your particular application – everything is

possible from “full control” to “reduction to the essential”.

If that is not fast enough for you, just use one of the supplied

templates.

Application-oriented, easy-to-use, configurable user

interface

Automatic and manual tests

Based on ODX, ASAM MCD-3 and FIBEX

Standardized and manufacturer-specific diagnostic

protocols for CAN, LIN, FlexRay, MOST and K-line

Tailor-made tool variants

Softing AG

Automotive Electronics

Richard-Reitzner-Allee 6

85540 Haar, Germany

Softing North America, Inc.

29 Water Street, Suite 301

Newburyport, MA 01950

USA

Data Sheet

The Universal Tool for ECU Communication

Tel.: +49 (0) 89 4 56 56-420

Fax: +49 (0) 89 4 56 56-499

info.automotive@softing.com

www.softing.com

Tel.: +1 978 499 9650

Fax: +1 978 499 9654

info.usa@softing.com

www.softing.us

Application Matrix

Interface element/

HMIcontrol

Application

Communication engineering

Diagnostic engineering

Data validation

Function validation

ECU integration

OBD test

ECU programming

Application engineering

Technical Data

Diagnostic protocols

KWP2000, DiagnosticsOnCAN, UDS in the standard delivery scope (ISO 14230, 15765, 14299)

Lots of OEM-specific protocols available, e.g. for BMW, DaimlerChrysler, VW/Audi, GM

Further protocols on request

Standard conformity

ASAM MCD-2D v2.0.1 (ODX), ASAM MCD-3D v2.0.2 functionality inside

ASAM MCD-2MC v1.4 (A2L): import of measurements by DTS-Venice

Import of CANdb (industrial standard) by DTS-Venice

Templates

Data/communication test

Flash Programming

OBD test

Hardware interfaces

EDIC family

EDIC-DC family (DCDI: DaimlerChrysler)

Softing, ETAS and Vector CAN interfaces

D-PDU API and SAE J2534 interfaces

Services

As a communication specialist, we support you in all parts

of the process chain with data creation, configuration, program-

ming, training and consulting. Examples of our top-quality

services are: creation of ODX databases, configuration of

DTS-Monaco interfaces and adaptation of sequences of

ECU programming. In addition, the modular structure of

DTS-Monaco also allows fast integration of customized

interface elements. Just give us a call!

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: