DG Client-Box VPN guide.pdf

VPN Configuration of ProSafe Client and Netgear DG Router

Prerequisites:

Software: VPNGL02 or VPNGL05 (Version 5.04)

Hardware: Netgear DSL router with VPN support, PC with Windows XP, Vista or 7.

Introduction:

This document will guide you on how to create a VPN policy for any of the home DSL gateways

that support VPN, as well as how to configure the VPN Pro-Safe VPN client in order to allow a

Virtual Private Network to be established over the internet.

Version 1.1

Checklist:

As we configure the Netgear DSL VPN Gateway, there will be information we’ll add which will

later be used in the configuration of the ProSafe Client Software. This information will be marked

with red numbered circles. The values we will use for this guide are already filled as light grey.

You can print this form to help keep track of this information.

➊

➋

Pre-Shared Key: _ _______________ 12345678 _

Client Identifier: _ ___ _____ _____client.com _

➌

➍

➎

➏

❼

Router Identifier: _ _________ _____router.com _

Client’s IP Address: _ _______ _ _ __192.168.100.1 _

Router’s Network Address: _ _____ ___192.168.0.0 _

Router’s Network Mask: _ __ _______ 255.255.255.0 _

Router’s WAN IP Address: _ _____________ _86.41.176.179 _

Version 1.1

Configuration of the VPN Policy on the DSL Gateway:

 From the Router’s GUI, go to

VPN policies under Advanced –

VPN.

 Click on Add Auto Policy.

➊ The pre-shared key value

goes here.

This is your Pre-Shared Key.

➋ Here we select “Fully

Qualified Domain Name” and

we give the client a name

This is your Client Identifier.

➎

➏

➌ Here we select “Fully

Qualified Domain Name” and

we give the router a name

This is your Router Identifier.

➍

➍ Here we select “Single

Address” and we specify the

IP.

➌

This is your Client’s IP

Address.

➋

➊

➎ - ➏ Here we select “Subnet

Address” and add the address

and mask of our router.

This is your Router’s

Network Address and

Router’s Network Mask.



To accept this settings, click

on “Apply”

Version 1.1

Configuration of the VPN Policy on the ProSafe Client:

Before you start configuring the VPN Client, go through the Checklist at the start and make sure

you have all the information listed there.



After installing the VPN Client

Software, click on the plus sign to

open the configuration panel .



Right click on “VPN Configuration”

and add a new Phase 1. It will be

added with the name Gateway.

Version 1.1

 Click on gateway.

❼ The Remote Gateway field will be

the value of your Router’s WAN

IP Address .

❼

➊

➊ Input the Pre-Shared Key that

you have used when creating the

VPN Policy on the Router and

click on the OK Button.

 Next, tick the checkbox next to

Use: Secure Gateway Tunnel.

➋ The Local ID Type is DNS, and the

Value for the ID is your Client

Identifier.

➌ The ID Type field will be the value

of your Router Identifier.

➋

➌

Version 1.1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: