TD200_e.pdf

(748 KB) Pobierz
Product Overview and
Installation
1
2
Configuring the TD 200
SIMATIC
3
Operating the TD 200
TD 200
Operator Interface
Creating Sample
Programs
4
Specifications and
Reference
A
User Manual
Multiple CPU Configura-
tions
B
C
Troubleshooting
This manual has the order number:
6ES7272-0AA00-8BA0
TD 200 Parameters and
Messages
D
Index
1018051401.027.png 1018051401.028.png 1018051401.029.png 1018051401.030.png 1018051401.001.png 1018051401.002.png 1018051401.003.png 1018051401.004.png 1018051401.005.png 1018051401.006.png 1018051401.007.png 1018051401.008.png 1018051401.009.png 1018051401.010.png
Safety Guidelines
This manual contains notices which you should observe to ensure your own personal safety,
as well as to protect the product and connected equipment. These notices are highlighted in
the manual by a warning triangle and are marked as follows according to the level of danger:
Danger
indicates that death, severe personal injury, or substantial property damage will result if proper
precautions are not taken.
!
Warning
indicates that death, severe personal injury, or substantial property damage can result if proper
precautions are not taken.
!
Caution
indicates that minor personal injury or property damage can result if proper precautions are not
taken.
!
Qualified Personnel
The device/system may only be set up and operated in conjunction with this manual.
Only qualified personnel should be allowed to install and work on this equipment.
Qualified persons are defined as persons who are authorized to commission, to ground, and
to tag circuits, equipment, and systems in accordance with established safety practices and
standards.
Correct Usage
Note the following:
Warning
This device and its components may only be used for the applications described in the catalog
or the technical description, and only in connection with devices or components from other
manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
!
Trademarks
SIMATIC, SIMATIC NET
and SIMATIC HMI are registered trademarks of
Siemens AG.
Copyright Siemens AG 1997 All rights reserved.
The reproduction, transmission, or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design, are
reserved.
Disclaimer of Liability
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However,
the data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcomed.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsgebiet Industrie-Automatisierungssysteme
Postfach 4848, D-90327 Nuernberg
Siemens Aktiengesellschaft
Siemens AG 1997
Technical data subject to change.
6ES7272-0AA00-8BA0
Positioniermodul für Abschaltpunktepositionierung
1018051401.011.png 1018051401.012.png 1018051401.013.png 1018051401.014.png 1018051401.015.png 1018051401.016.png 1018051401.017.png 1018051401.018.png 1018051401.019.png 1018051401.020.png 1018051401.021.png 1018051401.022.png 1018051401.023.png
 
Preface
Purpose
The SIMATIC TD 200 Operator Interface User Manual is a combination user and reference
manual that describes the operation of the TD 200 Operator Interface Module with an S7-200
programmable logic controller.
Audience
This manual is designed for engineers, programmers, and maintenance personnel who have
a general knowledge of programmable logic controllers and operator interfaces.
Scope of This Manual
This manual describes the operation of version 1.1 and later of the TD 200. This release
includes new features and other operational enhancements.
Release Notes
Version 1.1 of the TD 200 includes the following new features:
Supports real (floating-point) numbers
Provides password protection for editable variables and for the Menu mode of operation
Supports multiple parameter blocks in a single S7-200 CPU (with a setup menu for
entering the V memory address)
Supports 19.2 Kbaud communication rate (with a setup menu for changing the baud rate)
Sets a bit in the parameter block every time an arrow key is pressed, thus allowing your
program to have more control of the TD 200
Includes an alternative character set for creating bar charts
Other enhancements (such as using any key—not just the ESC key—to cancel the scrolling
of the messages, or using SHIFT-ENTER to set a variable to 0) either improve the
performance of the TD 200 or make it easier to use. For example, you can now use the
SHIFT-UP/DOWN arrow keys to perform a character-by-character edit of a variable that is
embedded in a message.
Version 1.2 of the TD 200 includes the following new features:
Corrects problems with multi-master networks
Makes the editors more consistent
For upgrades to version 1.2 of the TD 200, contact your distributor.
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
iii
1018051401.024.png
Preface
Agency Approvals
The SIMATIC S7-200 series meets the standards and regulations of the following agencies.
Underwriters Laboratories, Inc.:
UL 508 Listed
(Industrial Control Equipment)
Canadian Standards Association:
CSA C22.2 Number 142 Certified
(Process Control Equipment)
European Community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC
How to Use This Manual
If this is your first experience using an operator interface, read the entire manual. If you are
an experienced user, refer to the Table of Contents or Index to find specific information.
Related Information
Refer to the following documentation for more detailed information about selected topics:
SIMATIC S7-200 Programmable Controller System Manual: provides information about
installing and programming the S7-200 Micro PLCs, including the following topics:
–
Installing and wiring the S7-200 CPU and expansion I/O modules, and installing the
STEP 7–Micro/WIN software
– Designing and entering a program
– Understanding features of the CPU, such as data types and addressing modes, the
CPU scan cycle, password-protection, and network communication
This manual also includes descriptions and examples for the programming instructions,
typical execution times for the instructions, and the data sheets for the S7-200
equipment.
SIMATIC STEP 7–Micro/DOS User Manual: describes how to use the
STEP 7–Micro/DOS programming software package for the SIMATIC S7-200 series of
programmable logic controllers.
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
iv
1018051401.025.png
Contents
1
Product Overview and Installation
Chapter Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1
1.1
Hardware Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components of the TD 200
1-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2
TD 200 Keyboard Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3
1.2
Installing the TD 200
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the Mounting Surface
1-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the TD 200 for Mounting
1-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-4
Mounting the TD 200
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5
1.3
Connecting the Communication Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Cable for One-to-One Communication
1-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6
Installing a Multiple CPU Network
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6
1.4
Connecting a Power Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplying Power from the S7-200 CPU
1-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplying Power from an External Power Supply
1-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-7
2
Configuring the TD 200
Chapter Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
2.1
Starting the STEP 7–Micro/WIN TD 200 Configuration Wizard
. . . . . . . . . . . . . . . .
2-2
Selecting Language and Bar Graph Character Set
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Enabling Time-of-Day, Force Function, and Password Protection
2-3
. . . . . . . . . . . . . .
2-4
Specifying Function Key Memory Bits and Display Update Rate
. . . . . . . . . . . . . . .
2-4
Selecting Message Size and Number of Messages
. . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying Parameter Block Address, Message Enable Address, and
Message Location
2-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating A Text-Only Message
2-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Embedding Data Values in a Text Message
2-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-9
Formatting the Embedded Data Value
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Message That Requires Acknowledgement
2-11
. . . . . . . . . . . . . . . . . . . . . . .
2-14
Viewing the TD 200 Parameter Block and Messages
. . . . . . . . . . . . . . . . . . . . . . . .
2-17
2.2
Creating a Sample Program
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-18
3
Operating the TD 200
Chapter Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
3.1
Using the Display Message Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
Functions Available
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scrolling through Messages
3-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
Editing a Value
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledging a Message
3-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
3.2
Using the Menu Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Menus Available
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Menu Options
3-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Exiting Menu Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
v
1018051401.026.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin