PE20601GBD.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

PEUGEOT

MOD.

206

YEAR. 01 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment on the

support located on the left of the driver’s side shock absorber column.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s

side.

POWER SUPPLY

+ 30: connect to the 3 mm 2 RED supply wire of the BSI operating central.

- 31: connect directly with a cable terminal to the car body. As alternative, connect

directly to the negative pole of the battery.

IGNITION WIRE

+ 15/54: connect to the wire located at the position nr. 4 of the 26 way light blue

connector coming out of the BSI operating central.

DIRECTION INDICATORS

Connect to the wires located at the positions nr. 10 and nr.11 in the 16 way black

connector coming out of the BSI operating central.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the wire marked nr. 605 located in the wiring harness coming out of the push-

button panel of the driver’s side door.

Front window, passenger’s side:

cut the wire marked nr. 609 located in the wiring harness coming out of the push-

button panel of the driver’s side door.

CENTRAL DOORS LOCKING Negative control signal

Refer to the diagram nr. 88 for the antithefts of the Bridge serie and to the

diagram nr. 88A for the antithefts of the 3100 serie.

IMMOBILISATION POINT

Gasoil pump

Cut the wire marked nr. 121 located at the position E6, in the 46 way black

connector placed under the fuses holder box in correspondence of the fuse nr. 2,

in the engine compartment.

STARTER

+ 50: Cut the activation control wire of the relay of the starter located in the wiring

harness coming out of the connector of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS AND BOOT

SWITCH

Connect to the wire located at the position nr. 14 of the 26 way BSI operating

central.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

pe20601gbd.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N° 88

Diagram to make the central locking on

PEUGEOT 206-406-406 coupè-RANCH

(for Bridge serie antithefts)

VIOLET/ORANGE ORANGE GREY/BLACK VIOLET

Door switch

driver’s side

guida

BSI

operating central

Wire located at the postion nr. 8 (or nr.5)

of the 26 way blue connector

The BSI operating central is located under the driver’s side fuse box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

pe20601gbd.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N° 88A

Diagram to make the central locking on

PEUGEOT 206-406-406 coupè-RANCH

(for 3100 serie antithefts)

VIOLET/WHITE ORANGE GREY/BLACK VIOLET

ORANGE/WHITE

Door switch

driver’s side

BSI

operating central

Wire located at the position nr.8 (or nr.5)

of the 26 way blue connector

The BSI operating central is located under the driver’s side fuse box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

pe20601gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: