T969-330-01-Collaborationr.pdf

PTC Global Services

Pro/E Wildfire Collaboration Training

Release 2002

Instructor Version T969-330-01

Pro/E Wildfire Collaboration Training

User and training documentation from Parametric Technology Corporation (PTC) is subject to the copyright laws of the United States

and other countries and is provided under a license agreement that restricts copying, disclosure, and use of such documentation. PTC

hereby grants to the licensed user the right to make copies in printed form of this documentation if provided on software media, but only

for internal/personal use and in accordance with the license agreement under which the applicable software is licensed. Any copy made

shall include the PTC copyright notice and any other proprietary notice provided by PTC. This documentation may not be disclosed,

transferred, modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means

without the prior written consent of PTC and no authorization is granted to make copies for such purposes. Information described herein

is furnished for general information only, is subject to change without notice, and should not be construed as a warranty or commitment

by PTC. PTC assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. The software

described in this document is provided under written license agreement, contains valuable trade secrets and proprietary information, and

is protected by the copyright laws of the United States and other countries. It may not be copied or distributed in any form or medium,

disclosed to third parties, or used in any manner not provided for in the software licenses agreement except with written prior approval

from PTC. UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND

CRIMINAL PROSECUTION .

Registered Trademarks of Parametric Technology Corporation or a Subsidiary

Advanced Surface Design, CADDS, Computervision, Computervision Services, Electronic Product Definition, EPD, EPD.Connect,

Expert Machinist, HARNESSDESIGN, ICEM, Info*Engine, InPart, Optegra, Parametric Technology,

Parametric Technology Corporation, Pro/DESKTOP, Pro/E, Pro/ENGINEER, Pro/HELP, Pro/INTRALINK, Pro/MECHANICA,

Pro/TOOLKIT, PTC, PT/Products, Shaping Innovation, and Windchill.

Trademarks of Parametric Technology Corporation or a Subsidiary

3DPAINT, Associative Topology Bus, Behavioral Modeling, CDRS, CounterPart, Create Collaborate Control, CV, CVact, CVaec,

CVdesign, CV-DORS, CVMAC, CVNC, CVToolmaker, DataDoctor, DesignSuite, DIMENSION III, DIVISION, DVS,

DVSAFEWORK, EDE, e/ENGINEER, Electrical Design Entry, EMX, eNC Explorer, Expert MoldBase, Expert Toolmaker,

Flexible Engineering, GRANITE, ISSM, KDiP, Knowledge Discipline in Practice, Knowledge System Driver, ModelCHECK,

MoldShop, NC Builder, PartSpeak, Plastic Advisor, Pro/ANIMATE, Pro/ASSEMBLY, Pro/CABLING, Pro/CASTING, Pro/CDT,

Pro/CMM, Pro/COLLABORATE, Pro/COMPOSITE, Pro/CONVERT, Pro/DATA for PDGS, Pro/DESIGNER, Pro/DETAIL,

Pro/DIAGRAM, Pro/DIEFACE, Pro/DRAW, Pro/ECAD, Pro/ENGINE, Pro/FEATURE, Pro/FEM-POST, Pro/FICIENCY,

Pro/FLY-THROUGH, Pro/HARNESS, Pro/INTERFACE, Pro/LANGUAGE, Pro/LEGACY, Pro/LIBRARYACCESS, Pro/MESH,

Pro/Model.View, Pro/MOLDESIGN, Pro/NC-ADVANCED, Pro/NC-CHECK, Pro/NC-MILL, Pro/NCPOST, Pro/NC-SHEETMETAL,

Pro/NC-TURN, Pro/NC-WEDM, Pro/NC-Wire EDM, Pro/NETWORK ANIMATOR, Pro/NOTEBOOK, Pro/PDM,

Pro/PHOTORENDER, Pro/PHOTORENDER TEXTURE LIBRARY, Pro/PIPING, Pro/PLASTIC ADVISOR, Pro/PLOT,

Pro/POWER DESIGN, Pro/PROCESS, Pro/REPORT, Pro/REVIEW, Pro/SCAN-TOOLS, Pro/SHEETMETAL, Pro/SURFACE,

Pro/VERIFY, Pro/Web.Link, Pro/Web.Publish, Pro/WELDING, Product Development Means Business, Product 1st, Products 1st,

Product First, Products First, ProductView, Shrinkwrap, The Product Development Company, Wildfire, Windchill DynamicDesignLink,

Windchill PartsLink, Windchill PDMLink, and Windchill ProjectLink.

Third-Party Trademarks

Adobe is a registered trademark of Adobe Systems. Advanced ClusterProven, ClusterProven, and the ClusterProven design are

trademarks or registered trademarks of International Business Machines Corporation in the United States and other countries and are

used under license. IBM Corporation does not warrant and is not responsible for the operation of this software product. Allegro,

Cadence, and Concept are registered trademarks of Cadence Design Systems, Inc. AutoCAD is a registered trademark of Autodesk, Inc.

Baan is a registered trademark of Baan Company. CADAM and CATIA are registered trademarks of Dassault Systems. COACH is a

trademark of CADTRAIN, Inc. DOORS is a registered trademark of Telelogic AB. FLEX lm is a registered trademark of GLOBEtrotter

Software, Inc.

Geomagic is a registered trademark of Raindrop Geomagic, Inc. EVERSYNC, GROOVE, GROOVEFEST, GROOVE.NET,

GROOVE NETWORKS, iGROOVE, PEERWARE, and the interlocking circles logo are trademarks of Groove Networks, Inc. Helix is

a trademark of Microcadam, Inc. HOOPS is a trademark of Tech Soft America, Inc. HP-UX is a registered trademark of the Hewlett-

Packard Company. I-DEAS, Metaphase, Parasolid, SHERPA, Solid Edge, and Unigraphics are trademarks or registered trademarks of

Electronic Data Systems Corporation (EDS). InstallShield is a registered trademark and service mark of InstallShield Software

Corporation in the United States and/or other countries. IRIX is a registered trademark of Silicon Graphics, Inc. Java and all Java based

marks are trademarks or registered trademarks of Sun Microsystems, Inc. MatrixOne is a trademark of MatrixOne, Inc. Mentor Graphics

and Board Station are registered trademarks and 3D Design, AMPLE, and Design Manager are trademarks of Mentor Graphics

Corporation. Netscape and the Netscape N and Ship's Wheel logos are registered trademarks of Netscape Communications Corporation

in the U.S. and other countries. Oracle is a registered trademark of Oracle Corporation. OrbixWeb is a registered trademark of IONA

Technologies PLC. PDGS is a registered trademark of Ford Motor Company. RAND is a trademark of RAND Worldwide.

Rational Rose is a registered trademark of Rational Software Corporation. RetrievalWare is a registered trademark of Convera.

Corporation. RosettaNet is a trademark and Partner Interface Process and PIP are registered trademarks of “RosettaNet,” a non-profit

organization. SAP and R/3 are registered trademarks of SAP AG Germany. SolidWorks is a registered trademark of SolidWorks

Corporation. VisTools is a trademark of Visual Kinematics, Inc. (VKI). VisualCafé is a trademark of WebGain, Inc. WebEx is a

trademark of WebEx Communications, Inc. Microsoft, Windows, Windows NT, Visual Basic, and the Visual Basic logo are registered

trademarks of Microsoft Corporation in the United States and/or other countries

Licensed Third-Party Technology Information

Certain PTC software products contain licensed third-party technology: Rational Rose 2000E is copyrighted software of Rational

Software Corporation. RetrievalWare is copyrighted software of Convera Corporation. VisualCafé is copyrighted software of

WebGain, Inc. VisTools library is copyrighted software of Visual Kinematics, Inc. (VKI) containing confidential trade secret

information belonging to VKI. HOOPS graphics system is a proprietary software product of, and is copyrighted by,

Tech Soft America, Inc. G-POST is copyrighted software and a registered trademark of Intercim. VERICUT is copyrighted software and

a registered trademark of CGTech. Pro/ENGINEER Plastic Advisor is powered by Moldflow technology. Moldflow is a registered

trademark of Moldflow Corporation. The JPEG image output in the Pro/Web.Publish module is based in part on the work of the

independent JPEG Group. DFORMD.DLL is copyrighted software from Compaq Computer Corporation and may not be distributed.

METIS, developed by George Karypis and Vipin Kumar at the University of Minnesota, can be researched at

by LightWork Design 1990–2001. Visual Basic for Applications and Internet Explorer is copyrighted software of Microsoft

Corporation. Adobe Acrobat Reader is copyrighted software of Adobe Systems. Windchill Info*Engine Server contains IBM XML

Technologies Ltd. Apache Server, Tomcat, Xalan, and Xerces are technologies developed by, and are copyrighted software of, the

Apache Software Foundation ( http://www.apache.org/ ) – their use is subject to the terms and limitations at:

http://www.apache.org/LICENSE.txt .

complete Info-ZIP license see ftp://ftp.info-zip.org/pub/infozip/license.html . Gecko and Mozilla components are subject to the Mozilla

Public License Version 1.1 at http://www.mozilla.org/MPL/ . Software distributed under the MPL is distributed on an "AS IS" basis,

WITHOUT WARRANTY OF ANY KIND, either express or implied. See the MPL for the specific language governing rights and

limitations. Technology "Powered by Groove" is provided by Groove Networks, Inc. Technology "Powered by WebEx" is provided by

97 Mattias L. Jugel, Marcus Meißner, is redistributed under the GNU General Public License . This license is from the original copyright

holder and the Applet is provided WITHOUT WARRANTY OF ANY KIND. You may obtain a copy of the source code for the Applet

at http://www.mud.de/se/jta (for a charge of no more than the cost of physically performing the source distribution), by sending an e-

mail to leo@mud.de or marcus@mud.de —you are allowed to choose either distribution method. The source code is likewise provided

under the GNU General Public License . GTK+The GIMP Toolkit are licensed under the GNU LPGL . You may obtain a copy of the

source code at http://www.gtk.org/ , which is likewise provided under the GNU LPGL .

UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGEND

This document and the software described herein are Commercial Computer Documentation and Software, pursuant to FAR 12.212(a)-

(b) (OCT’95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN’95), is provided to the US Government under a limited commercial

license only. For procurements predating the above clauses, use, duplication, or disclosure by the Government is subject to the

restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013

(OCT’88) or Commercial Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN’87), as applicable.

051402

Parametric Technology Corporation, 140 Kendrick Street, Needham, MA 02494 USA

PRINTING HISTORY

Document No.

Date

Description

T969-330-01

06/06/02

Initial Printing of Pro/E Wildfire Collaboration Training for Release 2002

Order Number DT-969-330-EN Printed in U.S.A

PTC Telephone and Fax Numbers

Education Services Registration in North America

Tel: (888) 782-3773

Fax: (781) 370-5553

Technical Support (Monday - Friday)

Tel: (800) 477-6435 (U.S.)

(781) 370-5332 or (781) 370-5523 (outside U.S.)

Fax: (781) 370-5650

License Management

Tel: (800) 216-8945 (U.S.)

(781) 370-5559 (outside U.S.)

Fax: (781)370-5795

Contracts

Tel: (800) 791-9966 (U.S.)

(781) 370-5700 (outside U.S.)

In addition, you can access the PTC Web site at www.ptc.com . Our Web site

contains the latest training schedules, registration information, directions to training

facilities, and course descriptions. You can also find general information about

PTC, Pro/ENGINEER, Consulting Services, Customer Support, and

Pro/PARTNERS.

Precision Learning

THE PRECISION LEARNING METHODOLOGY

PTC Global Services is dedicated to continually providing the student with an

effective, comprehensive learning experience. Toward this goal, PTC developed

Precision Learning, which matches the right training to the right people at the right

time using the right method.

Precision Learning is based on a three stage Learn—Assess—Improve methodology.

Stage 1: LEARN

The student attends a PTC training course, including any:

•

Instructor-led training course at a PTC training center.

On-site training course.

Customized training course.

Web-based training (WBT) course.

Stage 2: ASSESS

The impact of a training course is assessed using the Pro/FICIENCY Evaluator. The

Pro/FICIENCY Evaluator is a web-based skills assessment and development-planning tool. It

is designed to deliver information that will help improve the skills and productivity of the

student.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: