ALP_TRG_PRQ 2013R1 V4.0.pdf
(
2549 KB
)
Pobierz
ALP-TRG???
????
Alphacam Pre-requsite Training Document
Page 2 of 47
ALP_TRG_PRQ
Alphacam Pre-requsite Training Document
Copyright
Copyright © 2012 Vero Software Ltd. All rights reserved.
Any copyright or other intellectual property right of whatever nature which subsists or may
subsist in the presentation and/or content of the programs (including without limitation its
look, feel, visual or other non-literal elements) remains the property of Vero Software Ltd or
its licensor(s) absolutely.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system or translated into any language, in any form or by any means, electronic, mechanical,
optical, chemical, manual or otherwise, without the express written permission of Vero
Software Ltd.
Unauthorised reproduction or distribution of these programs or any part thereof is unlawful
and may result in civil or criminal penalties.
Alphacam and the Alphacam Logo are trademarks of Vero Software Ltd.
Windows is a trademark of Microsoft Corporation.
All product names mentioned in this publication, and not listed above, are acknowledged as
the trademarks of the respective manufacturers and producers of such products.
Vero Software Ltd makes no representations or warranties with respect to the contents
hereof and specifically disclaim any implied warranties of satisfactory quality or fitness for any
particular purpose. Further, Vero Software Ltd reserves the right to revise this publication and
to make changes in the contents hereof without obligation to notify any person of such
changes or revisions.
The information contained within this document is subject to change without notice and does
not represent a commitment on the part of the vendor. The software described in this
document is furnished under a licence agreement and may be used or copied only in
accordance with the terms of the agreement.
Version 4
Page 3 of 47
A0
Alphacam Pre-requsite Training Document
Contents
Conventions used in this guide ......................................................................... 7
Recommended Operating Systems and Hardware for Alphacam ..................... 8
Supported Operating Systems 8
Alphacam Minimum Specifications 8
Purpose of Alphacam ....................................................................................... 9
Mission Statement 9
Definition of a finalised Post Processor 9
Definition of a Process Plan 9
Influences outside Alphacam............................................................................ 9
Geometry Creation Options .............................................................................. 9
Process Options controlled by Alphacam ....................................................... 10
Machining Types 10
Hole creation 10
Area Clearance 2D 10
Area Clearance 3D 10
Profiling 2D 10
Profiling 3D 10
Machining in work planes 10
Disc/Saw Cutting 10
Application of machining 11
Conclusions.................................................................................................... 11
Introduction..................................................................................................... 12
Aims & Objectives .......................................................................................... 13
Overall Aim 13
Specific Aims 13
Overall Objective 13
Specific Objectives 13
Alphacam Hardware Overview ....................................................................... 14
The Keyboard 14
The Rodent 14
Left (Primary) Button 14
Right (Secondary) Button 14
Computer Filing System ................................................................................. 15
What are Files 15
Folders/Directories 15
Drives 15
Alphacam Directory Structure......................................................................... 16
Alphacam (Release) (Revision) 16
LICOMDAT 16
LICOMDIR 16
Graphics Screen and Menu Layout ................................................................ 17
Graphics Screen
17
Page 4 of 47
ALP_TRG_PRQ
Alphacam Pre-requsite Training Document
The Project Manager ...................................................................................... 17
Layers 18
Operations 18
Work Planes 18
Machining Styles 18
Constraints 18
Nesting 18
Simulation 18
Button Bars 19
System Configuration ..................................................................................... 20
FILE | Configure | General 20
FILE | Configure | Folders 20
Toolbar & Keyboard Configuration.................................................................. 21
What is CAD................................................................................................... 23
CAD what’s in a name? 23
Drawing/Paint/Sketch or CAD 23
Precision and Accuracy 23
Real Scale 23
Vector Graphics Display 24
Coordinate Geometry 24
Relative or Incremental Coordinates 24
Absolute Coordinates (Cartesian System) 24
Turning Coordinates Environment 25
Automation 25
Conclusion 25
Drawing Elements 26
Element Properties 26
3D CAD .......................................................................................................... 27
3D Co-ordinates. 27
3D Geometry Elements 27
3D Polylines & Splines 27
2D Planar Geometry. 27
Planes 28
3D Surface 29
Surface type Examples 29
Wire frame view 29
Shaded Picture View 29
3D Solid 29
Alphacam Principles of use ............................................................................ 30
Creating new Geometry 31
Modifying Existing Geometry 31
Data Entry ...................................................................................................... 31
Geometry Creation Overview ......................................................................... 33
Version 4
Page 5 of 47
A0
Plik z chomika:
skotisobek
Inne pliki z tego folderu:
ALP_TRG_PRQ 2013R1 V4.0.pdf
(2549 KB)
Alphacam 2000.zip
(343127 KB)
Current software.7z
(1876108 KB)
Inne foldery tego chomika:
cam
Zgłoś jeśli
naruszono regulamin