Firmware.pdf

Ⅳ. FIRMWARE

1. Resetting Camera

Instructions for initializing the factory set camera are given.

1. Turn on the Camera

2. Power off the camera by pressing the

wide button and the down button.

3. Turn on the camera and check whether

the camera is reset or not.

- This Document can not be used without Samsung's authorization -

Ⅳ. FIRMWARE

2. Checking the Version

Instructions for checking the current firmware version of the camera are given.

1. Connect the fully charged battery.

2. Turn the camera off if it is on.

3. Power on the camera by pressing the

shutter button and the down button.

- This Document can not be used without Samsung's authorization -

Ⅳ. FIRMWARE

4. Check the firmware version and turn

off the camera.

- This Document can not be used without Samsung's authorization -

Ⅳ. FIRMWARE

3. Upgrading the Firmware

Firmware execution

The firmware is comprised of the following structure.

The execution codes which operate the camera are in the code area. Various resources, required

for operating the camera, are saved in the partition [1:3] area. The defective pixel adjustment data

and the lens shading adjustment data are saved in partition 3.

The setting values, which are set in the menu when using the camera, are saved in the user area

where the adjustment data from the integrated process is saved.

Code

Partition 1

Partition 2

Partition 3

User Area

▷Generic version :

- This version is used for updating the Code + Partition [1:2] area. The adjustment data saved in the user

area and partition 3 is protected.

1. Insert the SD card where the firmware data file and upgrade script file are saved, into the camera.

* Two files, namely the firmware data file and the upgrade script file are required for the firmware

upgrade.

* All the data saved in the flash memory must be backed up prior to the firmware upgrade, or it will be

lost.

2. Connect the AC adapter or a fully charged battery.

* To upgrade the firmware, the battery level indicator on the LCD monitor must be full (level three).

- This Document can not be used without Samsung's authorization -

Ⅳ. FIRMWARE

3. Turn the camera off if it is on.

4. The firmware version for the upgrade

will be displayed on the LCD display.

When pressing the shutter button, the

upgrade starts.

5. The status of the firmware upgrade is

displayed on the LCD display during the

firmware upgrade.

6. After completing the upgrade, the camera is turned off automatically.

- This Document can not be used without Samsung's authorization -

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: