LG WM_WD1243FB.pdf

2. FEATURES & TECHNICAL EXPLANATION

2-1.FEATURES

¡Æ LOW TANGLE AND LOW DAMAGE.

Drum washing machine have uniform washing without damage and tangle by rubbing and beating.

¡Æ ADOPT FUZZY LOGIC.

FUZZY denote that MICOM can set the optimal washing process by sensing laundry amount and

temperature of ambience and water.

¡Æ LOW-NOISE.

Low-noise washing and spinning is accomplished by adopting electronic motor control.

¡Æ LIGHT-WEIGHT .

By reducing the weight of system dramatically to 63kg, it is easy to handle.

¡Æ RESERVATION. (DELAYED START)

If necessary, the reservation time for washing can be set up by controlling the (TIME DELAY)

button.

¡Æ EASY CHECK OF THE WATER TEMPERATURE IN WASHING.

Water temperature is displayed by pressing the selection (WATER TEMP) button on washing.

¡Æ WHEN THE SETTING TEMPERATURE IS OVER 60 ¡ .

Washed water is gradually decreased by repeating WATER INLET-RINSE-DRAIN to

prevent the laundry from damage by water temperature sudden change.

¡Æ POWER SHOWER RINSE.

The front of door sprays out the water to remove the remaining detergent with just a little amount water.

¡Æ PREFERRED TEMPERATURE SELECTION.

Selected temperature from cold to heating(6 steps).

¡Æ CHILD-LOCK.

The Child-Lock system has been developed to prevent children from processing any button to change

the program during operation.

¡Æ RINSE HOLD.

If you desire to leave your synthetic and wool fabrics in the machine after the wash program you may

select the (RINSE HOLD) function to prevent them from getting wrinkled.

¡Æ Auto Restart

Although the washing machine is turned off by a power failure, it restarts automatically in its stopped

again and the process is properly adjusted and it will be the same when the machine unplugged in

operation is plugged in again.

2-2.SENSING THE LAUNDRY AMOUNT

¡ PRINCIPLE : After the first water supply, the laundry absorbs the water with the revolution of drum,

which causes the decrease of water level.

Micro-Processor senses decreased water level and makes water to be supplied more and

recognizes he amount of the laundry by calculating the times of complementary water supply.

¡ Criteria :

AMOUNT OF LAUNDRY

TIMES OF COMPLEMENTARY

WATER SUPPLY

below 2.0 §‚

1~2 times

above 4.5 §‚

3 times or more

¡ The times of water supply depends on amount of laundry, material of laundry

and water temperature etc.

2-3.DETERMINE WASHING TIME BY FUZZY LOGIC

To get the best washing performance optimal time is determined by sensing of water temperature,

selected washing temperature and laundry amount.

water

temperature

washing time

the best

washing

performance

selected

washing

temperature

FUZZY

LOGIC

rinse time

spin rhythm, time

laundry

amount

SENSING

PROCESSING

DETERMINATION

EFFECT

2-4.WATER LEVEL CONTROL

¡ This model adopts a pressure sensor which can sense the water level in the tub.

¡ When the water level reaches to the preset level water supply is stopped, then washing program proceeds.

¡ Spinning does not proceed until the water in the tub reduces to a certain level.

2-5.CONTROL OF DOOR OPEN

ƒU The door can be opened by pressing (DOOR OPEN) button after finishing program.

ƒU When the revolution of drum is stopped and in case water level is below level 2, door can be opened by pressing

the (DOOR OPEN) button.

ƒU If there is no power, the door can be opened by revolving the door opener.

(If the water level is high, first drain the water by pulling out the hose cap)

2-6.IN CASE OF NOT OPEN THE DOOR

ƒU Power is off or unplugged.

ƒU Program is operating.

ƒU (DOOR LOCK) light turn on.

ƒU Motor(Drum) is spinning(Rotating).

door lock

2-7.IN CASE OF ¡A DOOR LOCK ¡ LIGHT TURNS ON

ƒU Water level frequency is below 23.2kHz.(Water level is high)

ƒU In the tub water temperature above 45 ¡

4. INSTALLATION

¢ Before servicing ask troubles of customers

¢ Check the adjustment(power supply is 220-240V, remove the transit bolts....)

¢Ł Check the troubles referring to the trouble shooting.

¢Ø Decide the step of service referring to disassembly and instructions.

¢Œ And then, service and repair.

¢º After servicing, operate the appliance whether it works O ¡ K or NOT.

¡Æ STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT

INSTALL THE APPLIANCE

ADJUST THE

BOLTS

ON FLAT AND FIRM SURFACE

HORIZONTAL

ƒU Remove the transit bolts

ƒU Turn the leveling feet to

(4EA: ¤ )with supplied spanner.

set the appliance horizontally.

ƒU Keep the transit bolts and

spanner for future use.

ƒU Insert the 4 caps( ¤Ł )provided

into the hole

Low

High

ƒU The appliance goes up by

rotating the feet clockwise

direction.

ƒU The appliance come down by

rotating the feet counter

clockwise direction.

¡Æ HOW TO CONNECT INLET HOSE

ƒU Check that the rubber packing is inside of the

valve connector.

ƒU Connect the inlet hose firmly to prevent leak.

¡Æ CONNECT DRAIN HOSE

¡⁄ Make sure that the hose is not twisted.

¡⁄ Avoid submerging the end of the hose.

¡ The drain hose should be placed under 85 §ﬂ from the floor.

¡Æ CONNECT POWER PLUG

¡⁄ Avoid connecting several electric devices,

It may be the cause of the fire.

¡⁄ Connect the power plug to the wall outlet.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: