Disassembly_&_Reassembly(1).pdf

(1673 KB) Pobierz
E:\서비스매뉴얼\SGH-F480\11)SGH-F480...
11. Disassembly and Assembly Instructions
11-1. Disassembly Instructions
1
1) Unscrew the REAR at the
four points.
2) Disassemble the IF cover and SD card
cover
2
1) Disassemble the Rear from the bottom side
to the upper side.
1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!
3 1) Disassemble the touch-key
connector,antenna cable , SPK
connector,camera connector
2) Unscrew the screw
4 1) Disassemble the PBA from the FRONT ASS'Y
1) When PBA is separated from LCD Connector,
Be careful not to damage!
1) Be careful not to damage FPCB!
11-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
232211195.012.png 232211195.013.png 232211195.014.png 232211195.015.png
Disassembly and Assembly Instructions
5
1) Remove the antenna and antenna cable
6 1) Remove the SPK ass'y and camera
1) Be careful not to damage antenna cable !
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage the FPCB
7 1) Remove the screw
2) Disassemble the touch key FPCB
3) Remove the bracket
1) Be careful not to make scratch and molding damage!
2) Be careful not to damage the LCD FPCB
11-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
232211195.001.png 232211195.002.png 232211195.003.png 232211195.004.png
Disassembly and Assembly Instructions
11-2. Assembly Instructions
1
1) Assemble the LCD on the front
2
1) Insert the key pad in the front
2) Assemble the bracket on the front and
insert the screw
1) Be careful not to damage LCD FPCB!
1) Be careful not to damage LCD FPCB!
2) Torque kgf.cm
3 1) Insert the touch key FPCB
2) Assemble Antenna and take care of the
antenna cable
4
1) Connect the LCD connector and
assemble the PBA on the bracket
2) Connect the touch-key
connector,antenna cable,SPK connector
1) Be careful not to damage the antenna cable ! 1) Be sure to connect the connectors!
11-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
232211195.005.png 232211195.006.png 232211195.007.png 232211195.008.png 232211195.009.png
Disassembly and Assembly Instructions
5
1) Insert the screw and connect the
camera connector
6 1) Assemble the side key , camera key and
power key.
2) Then assemble the rear.
1) Torque kgf.cm
1) Be sure the direction of side key
7 1) Screw up the REAR at 4 Points.
[]
1) Torque Kgf/
11-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
232211195.010.png 232211195.011.png
Zgłoś jeśli naruszono regulamin