_mech_PROCESS FLOW.pdf
(
145 KB
)
Pobierz
Title
Process Flow, Mechanical
Process Flow, Mechanical
Applicable for V800/ 802se
Contents
1
Process Flow, Mechanical .............................................................................................. 2
1.1
Process Flow Mechanical, Description ............................................................. 3
2
Process Flow, Label ........................................................................................................ 4
2.1
Process Flow Label, Description ....................................................................... 5
3
Revision History .............................................................................................................. 6
000 21-1/FEA 209 544/88 D
Company Internal
Sony Ericsson Mobile Communications AB
Approved according to 000 21-LXE 107 42/1
Process Flow
,
Mechanical
1 Process Flow, Mechanical
Unit in
No trouble found
or SW fault
Determine
fault
HW fault
Trouble shoot
Fault not repairable on
this level or cause of
failure not found
Repair
Fault not repairable on
this level
SW upgrade to
latest revision
if needed
Failure
Test
OK
Unit out
Next repair
level
000 21-1/FEA 209 544/88 D
Company Internal
Sony Ericsson Mobile Communications AB
2(6)
Process Flow
,
Mechanical
1.1
Process Flow Mechanical, Description
Box
Reference
Unit in
Process the phone according to local requirements.
Determine fault
Determine if the phone is faulty or not and if it possible confirm the
customerÓs complaint.
If a
HW
fault is found, or a HW
and
SW fault is found, continue
with
Trouble shoot.
If only a SW fault is found
Software upgrade to latest revision,
continue to
Test,
and
Unit out. Report as
SW upgrade
If no HW or SW fault is found, continue to
Software upgrade to
latest revision,
continue to
Test,
and
Unit out.
Report as
No Trouble Found, NTF.
Trouble shoot
Trouble Shooting Guide, Mechanical
Determine the cause of the failure. Trouble-shoot the phone
according to the guide for the most common faults.
Repair
Working Instruction, Mechanical
Repair the faulty phone according to the instruction. Replace parts
as required.
(Product Change Survey, Mechanical)
Flashing the latest software into the phone at this point may ÐrepairÑ
some problems.
SW upgrade to latest
revision if needed
Control the SW revision in the product, update to latest revision if
needed.
Test
Test Instruction, Mechanical
To verify that the phone works, all test actions must be performed.
Unit Out
Process and package the phone
according to local requirements.
Next Repair Level
If the cause of the failure cannot be found or is not reparable at this
level, then send the phone to the next repair level, or return it to the
customer at the customerÓs request.
000 21-1/FEA 209 544/88 D
Company Internal
Sony Ericsson Mobile Communications AB
3(6)
Process Flow
,
Mechanical
2 Process Flow, Label
Unit
In
Read the old label
Print a new label
Use Label Make to print a new label
Remove the
old label
Only one label is allowed
on the frame
Assemble a
new label
Unit
Out
000 21-1/FEA 209 544/88 D
Company Internal
Sony Ericsson Mobile Communications AB
4(6)
Process Flow
,
Mechanical
2.1
Process Flow Label, Description
Box
Reference
Use the
Label Make
program; read the information on the old label
and use that as an input for the new label.
Print a new Label.
Continue with
Remove the old label
.
Remove the old label
Working Instructions
Remove the old label according to the instructions. Only one label is
allowed on the frame.
Continue with
Assemble a new label
.
Assemble a new label
Working Instructions
Assemble the new label according to the instructions.
000 21-1/FEA 209 544/88 D
Company Internal
Sony Ericsson Mobile Communications AB
5(6)
Read the old label
Print a new label
Plik z chomika:
misiekyo
Inne pliki z tego folderu:
WORKING INSTRUCTION.pdf
(577 KB)
TROUBLE SHOOTING GUIDE.pdf
(147 KB)
PROCESS FLOW.pdf
(168 KB)
PART LIST.pdf
(121 KB)
INSTALLATION INSTRUCTION.pdf
(339 KB)
Inne foldery tego chomika:
Zgłoś jeśli
naruszono regulamin