readme.txt

========================================================================
*** Basic Information ***
========================================================================
[Create date] 2010/03/25
------------------------------------------------------------------------
[Program Name] SD Printer
------------------------------------------------------------------------
[Version] 3.05
------------------------------------------------------------------------
[PCB No.] B8411217V,D4061201F
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] B8415521L
[File Information]
 File Name         B8415521L.fwu
 File Type         Module for Service
 Size              2.18 MB ( 2285532 byte )
[File Information]
 File Name         B8415521L.rfu
 File Type         Module for Remote Upgrade
 Size              2.18 MB ( 2289920 byte )
------------------------------------------------------------------------
[Production reflection] 2010/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note] 

------------------------------------------------------------------------


========================================================================
*** Important Notes ***
========================================================================
[Important Notes] 

------------------------------------------------------------------------


========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Symptom corrected: 
The use of SDK applications that access the GPS Filter (such as the 
PDL filter) might result in slow printing.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 3.02
Symptom corrected: 
1.PCL jobs containing fonts with a number of characters that is evenly
  divisible by 256, might cause the device to stall. (GFPR#RE0706006, 
  RA07090001)
2.Subsequent PCL jobs will be canceled after the device prints a large
  number of jobs (more than 2000) submitted by the PCL 6 driver. 
  (GFPR#RE07080008) 
3.The PCL5 line pitch might be printed larger than the original. 
  (GFPR#RE07120011, RC08050003)
4.The printable area of a PCL5 page might extend beyond the border on 
  the right side. (GFPR#GFPR#RE07070010)
5.The username/usercode used to submit a stored job (Sample 
  Print/Locked Print/Hold Print/Stored Print) is not shown in the Job 
  Log of Web SmartDeviceMonitor ver 2.x.  


----------------------------------------
Version 3.00
Symptom corrected:
1.Minor bug correction.
2.Supports the Model MT-C3.5


----------------------------------------
Version 3.00
Fixed: Minor bug correction.

----------------------------------------
Version 1.08
Symptom corrected: 
1.Various printing anomalies when printing PowerPoint2007 jobs that 
  have Autoshapes and shadows. This can occur if printing with both of
  the following RPCS driver settings:
  -Resolution: 1800 x 600 dpi
  -Job Load Distribution: Shift load to driver

----------------------------------------
Version 1.07
Symptom corrected: 
1.PDF files printed using Adobe Acrobat and the RPCS driver might be 
  missing characters or portions of characters. This occurs if both 
  of the following conditions are met:
  -"Shift load to printer" selected for the RPCS driver's Job Load 
   Distribution setting.
  -Image rotation required: Portrait document to LEF paper -or- 
   Landscape document to SEF paper.
2.PCL jobs containing character codes that are not on the font SD 
  card, might cause the device to stall.
3.Jobs containing bitmapped PCL fonts might cause the device to stall.
4.When the job is created using SAP DeviceType or Barcode &OCR package
  for SAP System DT, the following issues will occur.
  -When sending a BOP job, the printer status stays at "Processing" 
   and the job is not printed.
  -Memory leak occurs when printing a bitmap font with insufficient 
   memory condition.
5.Accessing the document server in WIM via an single sign-on server 
  might result in "404 Not Found".This only happens if the url used to
  access WIM contains a "Host Name" and "Domain Name" (The "domain 
  name" setting in the MFP is not blank.). It does not happen if the 
  url contains an IP address.
  Note: To fix this issue, all of the following firmware must be 
        applied:
        -System firmware ver 2.08 or later
        -Websys firmware ver 2.02.1 or later
        -Web Uapl firmware ver 1.11 or later
        -NFA firmware ver 2.04 or later
        -Printer firmware ver 1.07 or later

Other changes:
1.Supports the Catalan and Turkish languages. For the details of this,
  please refer to RTB#RB246025 "Supports the Catalan and Turkish 
  languages".
  Note: To support this feature, install all of the following 
        firmware:
        -System_Copy firmware ver 2.08 or later
        -LCDC firmware ver 1.21 or later (Language firmware ver 0.71 
         or later)
        -Printer firmware ver 1.07 or later
        -Websys firmware ver 2.02.1 or later
        -WebUap firmware ver 1.11 or later
        -Scanner firmware ver 1.18 or later
        -Fax firmware ver 05.00.00 or later
        -FCU firmware ver 02.00.00 or later

----------------------------------------
Version 1.06
Symptom corrected: 
1.If a user tries to print a stored job (ie. Locked Print) while the 
  ScanRouter capture function is enable, the device might stall.

----------------------------------------
Version 1.05
The device supports Unicode v3.0 fonts. Unicode v3.0 fonts for 
Japanese/Korean/Traditional Chinese/Simplified Chinese are only 
available with the Unicode Font Package for SAP.

Symptom corrected: 
1.PCL data might be printed as garbage characters after several 
  hundred pages of PCL data are printed without a power-off.  
  (Techmail#TS060753) .
2.PCL jobs that include seperator pages might be printed as garbage 
  characters (FPR#RC06040009/RC0610007). 
3.After selecting a file in the Print Jobs menu in the operation 
  panel, all of the following buttons might remain greyed out.    
  - "Print"    
  - "Delete"     
  - "Select All Jobs"     
  - "Clear All"     
  - "Unlock File" (File Administrator privileges required)     
  - "Change Password"

----------------------------------------
Version 1.04
1.Fixed: HPGL syntax error (missing label terminator) will cause 
  the device to stall. 
  "Processing" will be displayed in the operation panel.

2.Fixed: The following reports are printed in a language other then 
  Russian, even if Russian is selected as the primary system language.
  - Configuration Page
  - Menu List- Error Log

  **Additionally, the title "File Name" in the Error Log will contain 
    garbage characters.

----------------------------------------
Version 1.03
Raster image performance improvement.

----------------------------------------
Version 1.02
New SP mode added: Printer SP1300-1 (GBC Punch Enabled).

----------------------------------------
Version 1.01
Fixed: The device might stall if it receives an RPCS job after another
RPCS job was canceled by an authentication error.

----------------------------------------
Version 1.00
1st Mass production