o_470wce.pdf

470W

Operating Instructions

Copy Reference

Paper type: Wood Free 80g/m2, Paper Thickness=100

m // Pages in book=180 // Print scale=81%

Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 9.000000 mm

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related

to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Ricoh recommends that you use genuine Ricoh toner.

Ricoh shall not be responsible for any damage or expense that might result from the use of parts other

than genuine Ricoh parts in your Ricoh office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see P.146 “Power Connection” .

Safety Information

When using your equipment, the following safety precautions should always be

followed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions

are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not

followed, may result in minor or moderate injury or damage to property.

WARNING:

•

Connect the power cord directly into a wall outlet and never use an ex-

tension cord.

•

Disconnect the power plug (by pulling the plug, not the cable) if the

power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock or laser radiation exposure, do not

remove any covers or screws other than those specified in this manu-

al.

•

Turn off the power and disconnect the power plug (by pulling the plug,

not the cable) if any of the following conditions exists:

•

You spill something into the equipment.

•

You suspect that your equipment needs service or repair.

•

Your equipment's cover has been damaged.

•

Do not incinerate spilled toner or used toner. Toner dust might ignite

when exposed to an open flame.

•

Disposal can take place at our authorized dealer or at appropriate col-

lection sites.

•

Dispose of the used toner cartridge in accordance with the local regu-

lation.

CAUTION:

•

Protect the equipment from dampness or wet weather, such as rain, snow,

and so on.

•

Unplug the power cord from the wall outlet before you move the equipment.

While moving the equipment, you should take care that the power cord will

not be damaged under the equipment.

•

When you disconnect the power plug from the wall outlet, always pull the

plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside

the equipment.

•

Keep toner (used or unused) and toner bottle out of the reach of children.

•

For environmental reasons, do not dispose of the equipment or expended

supply waste at household waste collection points. Disposal can take place

at an authorized dealer or at appropriate collection sites.

•

The inside of the machine could be very hot. Do not touch the parts with a

label indicating the “hot surface”. Otherwise it could cause a personal burn.

•

Our products are engineered to meet high standards of quality and function-

ality, and we recommend that you only use the expendable supplies availa-

ble at an authorized dealer.

Warnings and Precautions

This manual uses the following warning and precaution symbols to indicate im-

portant safety information.

When adding paper or clearing paper jams, be careful not to burn or injure your-

self.

ZEDH280E

ZEDH290E

1 Hot Surface Warning

iii

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: