FISCU98GBD.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

FIAT

MOD. SCUDO

YEAR 98 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment between

the battery and the driver’s side headlamp. Pass the cables through the original

hole on the panel of the engine compartment, above the shock absorber,

passenger’s side.

POWER SUPPLY

+ 30: connect to the general supply wiring of the fuse box located in a multiway

connector.

- 31: connect with a ring terminal to one of the terminals coming out of the original

power supply behind the left lateral panel on the driver’s side.

IGNITION WIRE

+ 15/54: connect to the 1,5 mm 2 WHITE wire located in the wiring harness coming

out of the first connector on the left of the fuse box.

DIRECTION INDICATORS

Connect to the GREEN wire marked nr. 233 and to the GREEN wire marked nr.

234 located in the wiring harness coming out of the multiway black connector of the

lights switch.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the WHITE wire marked nr. 6050 located in the wiring harness coming out of

the windows central unit under the dashboard, driver’s side.

Front window, passenger’s side:

cut the YELLOW wire marked nr. 609 located in the wiring harness coming out of

the windows central unit.

CENTRAL DOORS LOCKING Negative control signal

Connect to the GREEN wire marked nr. 6290 (unlock) and to the GREEN wire

marked nr. 6291 (lock) of the wiring harness located behind the driver’s side lateral

panel.

IMMOBILISATION POINT

Gasoil pump

Cut the WHITE wire located in the wiring harness coming out of the inertial switch

in the engine compartment, passenger’s side.

STARTER

+50: Cut the RED wire located in wiring harness coming out of the 2 way

connector, under the superior steering wheel cover box.

BONNET SWITCH

Install an additional switch on the headlamp support plate, near the left lateral

headlamp.

DOORS SWITCH

Connect to the GREEN wire marked nr. 300 located in the wiring harness coming

out of the 12 way brown connector, near the windows central unit.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiscu98gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: