CIXS201GBD2S.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE CITROEN MOD. XSARA 2 YEAR. 01 2 nd sem. ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens behind the driver’s side headlamp. To

do that it is suggested to take off the air filter.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s

side.

POWER SUPPLY

+ 30: connect to the general supply wire of the fuse box.

- 31: connect with a cable terminal directly to the car body.

IGNITION WIRE

+ 15/54: connect to the wire coming out of the 3A fuse (to insert) foreseen as

supply for additional accessories located in the shunting box placed on the side of

the battery.

DIRECTION INDICATORS

Connect to the wires at the positions nr.14 and nr.15 in the 16 way black

connector coming out of the (BSI) accessories operating central located under

the fuse box.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

connect to the GREY wire marked nr. 6010 located at the position nr. 4 of the

window control switch, driver’s side.

Front window, passenger’s side:

cut the wire marked nr. 6061, at the position nr. 5, of the window control switch,

passenger’s side.

For the connection to the driver’s side front window, it is necessary to refer to the

diagram nr. 68.

CENTRAL DOORS LOCKING Original door motor control signal

For antithefts of the Bridge serie, refer to the diagram nr.112, for antithefts of the

3100 serie refer to the diagram nr.112A.

IMMOBILISATION POINT

Gasoil pump

Cut the wire marked nr. 1201 located at the E6 position, in the 46 way black

connector, placed in the lower part of the fuse box, in the engine compartment, in

correspondence of the fuse nr. 52.

STARTER

50: Cut the WHITE wire located in the wiring harness coming out of the connector

of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side. It is

necessary to bore also the plastic cover.

DOORS AND BOOT SWITCH Connect to the wire at the position nr. 14, of the 26 way blue connector, coming

out of the (BSI) accessories operating central located under the fuse box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs201gbd2s.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°68

Diagram to make the windows locking with automatism on

XSARA 2

Antitheft central with Relay to reverse Original switches with automatic

BROWN/WHITE the polarity windows locking system

(time to 24s) left window right window

1052

+30

1 2 3 4 5

BROWN/WHITE

DIODES

1N4004

Antitheft central with the Temporized relay Original switches with automatic

BROWN Art. 1055 windows locking system

left window right window

+30

1055

1 2 3 4 5 6 7

BROWN

DIODES 1N4004

Note:

The above diagrams are to make electric windows locking on vehicles with “MAGIC” system

automatism on both the motors. In any case, if the motor (passenger’s side) does not have the

automatism, it is necessary to install the art. 2980 module for windows locking.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs201gbd2s.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°112

Diagram to make the connection of Bridge serie antithefts on

CITROEN XSARA 2

Art. 7918

BSI central

16 way black connector 26 way blue connector

YELLOW RED

nr. 5 position Nr. 6 position

VIOLET/ORANGE

+30

GREY/BLACK

ORANGE

YELLOW/BLACK

VIOLET

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs201gbd2s.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°112A

Diagram to make connection of 3100 serie antithefts on

CITROEN XSARA 2

Art. 3100

BSI central

16 way black connector 26 way blue connector

VIOLET/WHITE

ORANGE/WHITE

YELLOW RED

nr.5 position nr.6 position

+30

GREY/BLACK

ORANGE

YELLOW/BLACK

VIOLET

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs201gbd2s.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: