APC Smart 750 1000 1500 RACK.pdf

(1608 KB) Pobierz

UserÓs Manual

English

§

Smart

-UPS

UPS

750VA/1000VA/1500VA

100/120/230VAC

2U Rack Mount

Uninterruptible Power Supply

990-1194 5/02

1065783843.024.png

1065783843.025.png

Introduction

The APC Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags,

and surges from reaching your computer and other valuable electronic equipment. The UPS filters

small utility line fluctuations and isolates your equipment from large disturbances by internally dis-

connecting from the utility line. The UPS provides continuous power from its internal battery until

the utility line returns to safe levels or the battery is discharged.

1: I NSTALLATION

Read the Safety Instruction sheet before installing the UPS.

Unpacking

Inspect the UPS upon receipt. APC designed robust packaging for your product. However, accidents

and damage may occur during shipment. Notify the carrier and dealer if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents. The package contains the UPS, the front bezel, the rail kit, and a litera-

ture kit containing:

Product documentation and safety information

•

CD-ROM with additional user manual language support and safety information

•

PowerChute § CD-ROM (120V/230V models only)

•

Serial and USB communication cables

•

Two IEC jumper cables and one plug adaptor (230V models only)

•

The UPS is shipped with the battery disconnected.

Rail Installation

Install the rails following instructions in the rail kit.

Mounting rails are supplied for the standard 4-post rack. Two-post racks require only the mounting

brackets.

Ear Mounting Locations:

1. Standard

2.

2

Optional (1.4" setback)

3.

2-post rack (5" setback)

3

1

1

1065783843.026.png

1065783843.027.png

1065783843.001.png

1065783843.002.png

1065783843.003.png

1065783843.004.png

1065783843.005.png

1065783843.006.png

1065783843.007.png

1065783843.008.png

1065783843.009.png

1065783843.010.png

1065783843.011.png

1065783843.012.png

Positioning the UPS

Place the UPS where it will be used. The UPS is heavy. Select a location sturdy enough to handle

the weight.

Do not operate the UPS where there is excessive dust or the temperature and humidity are outside the

specified limits.

0»- 40»C (32»-104»F)

0-95% Relative Humidity

P LACEMENT

2.5 cm (1 in.)

Mounting the UPS in a Rack

The UPS is heavy. To lighten it, you may remove the battery before mounting the unit in the rack

(Steps 1 and 2).

Step 1

Step 2 Caution: The battery is heavy.

Step 3

Install the UPS at or near the bot-

tom of the rack (Step 3).

Check to ensure the rack will not

tip after installing the UPS into

the rack.

2

1065783843.013.png

1065783843.014.png

1065783843.015.png

1065783843.016.png

1065783843.017.png

1065783843.018.png

Installing and Connecting the Battery and Attaching the Front Bezel

Step 1

Step 2

Step 3

Step 4

Connect battery plug to UPS. Tuck white battery

cord into space above connector.

Connecting Equipment and Power to the UPS

S MART -UPS R EAR P ANEL

100/120V Models

120V Model Only: Site wiring fault indicator

230V Models

3

1065783843.019.png

1065783843.020.png

1065783843.021.png

1065783843.022.png

1065783843.023.png

Plik z chomika:

Inne pliki z tego folderu:

APC SMART 450 700 1000 1400 2200 3000.pdf (260 KB)
APC SMART 600 ups instrukcja.pdf (304 KB)
APC SMART 600.pdf (304 KB)
APC Smart 700 1000 1400 2U RACK pl.pdf (932 KB)
APC Smart 750 1000 1500 RACK.pdf (1608 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin