First Steps with STEP 7.pdf
(
31245 KB
)
Pobierz
SIMATIC First Steps with STEP 7 Lite V3.0
First Steps with STEP 7 Lite V3.0
SIMATIC
STEP 7 Lite V3.0
Edition 04/2004
simatic
"
4
Erstellen Sie
ein
Programm im
OB1
SIMATIC Software
First Steps with STEP 7 Lite V3.0
Getting Started
04/2004
A5E00293886-01
Introduction
Safety Guidelines
This manual contains notices intended to ensure personal safety, as well as to protect the products and connected
equipment against damage. These notices are highlighted by the symbols shown below and graded according to
severity by the following texts:
Danger
indicates that death, severe personal injury or substantial property damage will result if proper precautions are not
taken.
Warning
indicates that death, severe personal injury or substantial property damage can result if proper precautions are not
taken.
Caution
indicates that minor personal injury can result if proper precautions are not taken.
Caution
indicates that property damage can result if proper precautions are not taken.
Notice
draws your attention to particularly important information on the product, handling the product, or to a particular part of
the documentation.
Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as
persons who are authorized to commission, to ground and to tag circuits, equipment, and systems in accordance with
established safety practices and standards.
Correct Usage
Note the following:
0.2
Warning
This device and its components may only be used for the applications described in the catalog or the technical des-
cription, and only in connection with devices or components from other manufacturers which have been approved or
recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and
operated and maintained as recommended.
Trademarks
SIMATIC®, SIMATIC HMI® and SIMATIC NET® are registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to trademarks might infringe
upon the rights of the trademark owners.
Copyright © Siemens AG 2004 All rights reserved
Disclaimer of Liability
The reproduction, transmission or use of this
document or its contents is not permitted without express
written authority. Offenders will be liable for damages. All
rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcomed.
Siemens AG
Bereich Automation and Drives
Geschaeftsgebiet Industrial Automation Systems
Postfach 4848, D- 90327 Nuernberg
______________________________________________________
Siemens Aktiengesellschaft
©Siemens AG 2004
Technical data subject to change.
______________________________________________________
A5E00293886
Getting Started STEP 7 Lite A5E00293886-01
0.2
Welcome to STEP 7 Lite
... the SIMATIC software for generating PLC programs in LAD, FBD or STL for SIMATIC S7-300 (including
SIMATIC C7), ET 200S and ET 200X. STEP 7 Lite is designed for the newcomer to SIMATIC as well as for
the user editing projects offline.
You will need basic STEP 7 software or STEP 7 Professional if you want to implement a SIMATIC S7-400
PLC, distributed I/O, CP communication modules, FM function modules, or systems consisting of more than
one CPU.
Information on STEP 7 Lite
STEP 7 Lite is a software not only designed for newcomers, but also for the expert who primarily programs
medium performance systems. With STEP 7, programs created in STEP 7 Lite can be imported/exported for
further use. Compared to STEP 7, we went new ways in designing the user interface. Enhanced Explorer
functions, transparent project overviews and the usual Windows operating philosophy, all of which will offer
optimal support to you for getting started and working with our SIMATIC Software.
Information on this Getting Started
Here you will get to know the basics of STEP 7 Lite. We shall guide you through practical exercises introdu-
cing you to essential on-screen dialogs and operating procedures, prepared in such a way that you can start
at almost any chapter. Descriptions and operating procedures you should refer or which you must follow are
highlighted in
red
color. Brief excursions to associated topics are referenced in
blue
color.
0.3
Prerequisites for working with this Getting Started
What you need to work through the practical STEP 7 Lite exercises in this Getting Started:
• a SIMATIC PG or a PC,
• the STEP 7 Lite software package and the authorization disk,
• a SIMATIC S7-300 PLC.
Please note the Order No. table in Chapter
1.
Further Documentation
• After installation of STEP 7 Lite, select
Start > Simatic > Documentation
on your CD to open and print
the electronic manual "Programming with STEP 7 Lite".
Have lots of fun and success!
SIEMENS AG
Getting Started STEP 7 Lite A5E00293886-01
Plik z chomika:
emce007
Inne pliki z tego folderu:
SIMATIC HMI - instrukcja użytkownika.PDF
(2392 KB)
LOGO! - podręcznik użytkownika.pdf
(8883 KB)
Simatic S7-1200 - podręcznik systemu.pdf
(5194 KB)
Praca w Step 7.pdf
(4065 KB)
Sterowniki PLC Simatic Siemens - podręcznik.pdf
(1617 KB)
Inne foldery tego chomika:
Eplan Electric P8 v1.9.5 PL
omron
PLC!!!
programowanie
Szkolenie Allen Bradley
Zgłoś jeśli
naruszono regulamin